Heavy Duty Trucking Logo
MenuMENU
SearchSEARCH

Daimler, Paccar Recall Trucks Over Driveline Defect

Nearly 4,900 Freightliner, Western Star, and Kenworth trucks are being recalled because a missing snap ring could allow the driveline to separate from the truck.

November 16, 2026
Daimler, Paccar Recall Trucks Over Driveline Defect

Certain Cummins-supplied driveshafts may be missing a snap ring in the slip yoke assembly.

HDT Graphic

2 min to read


Daimler Truck North America and Paccar are recalling certain 2027-model trucks because a missing part in the driveline could cause it to separate from the vehicle while driving. However, manufacturers expect only a small percentage to actually have the problem.

The problem involves certain Cummins-supplied driveshafts that may be missing a snap ring in the slip yoke assembly. Without that ring, driveline components could move out of position, potentially causing the bearings or the driveline itself to separate.

Ad Loading...

Drivers may notice unusual driveline vibration or noise before a failure occurs.

Which Trucks Are Affected?

Daimler Truck North America is recalling nearly 3,900 Freightliner and Western Star trucks, although the company estimates only about 1% actually have the defect.

The recall covers certain 2027-model trucks built between July and October 2026, depending on the model:

Ad Loading...
  • Freightliner Cascadia and fifth-generation Cascadia
  • Freightliner Business Class M2
  • Freightliner 108SD and 114SD
  • Western Star 47X and 49X

Paccar is recalling 982 Kenworth trucks, with fewer than 1% expected to have the defect.

The affected 2027-model Kenworth trucks were built in August and September 2026 and include the T280, T380, T680, T880, and W990.

The recalls involve certain Cummins-supplied RPL10, RPL14, RPL20, RPL25, RPL35 and 176MXL series driveshafts.

What Fleets Need to Know

The fix is straightforward: The driveline will be inspected to make sure the snap ring is in place. If it's missing, the driveline will be replaced.

Ad Loading...

For Freightliner and Western Star trucks, Cummins-authorized service facilities will handle repairs. Kenworth dealers will inspect and replace affected drivelines as needed, free of charge.

Owner notification letters are expected to be mailed in January 2027.

More Maintenance

Maintenance technician holding tablet in shop environment with truck in background
Maintenance•November 16, 2026

What to Look for in Fleet Maintenance Software

Choosing the right maintenance technology starts with identifying the problems you need to solve. Here's what trucking fleets should look for — and what to ask potential providers.

Read More →
Bendix iTABS X trailer antilock braking system module shown in the foreground, with a tractor-trailer traveling on a highway in the background.
Equipment•by News/Media Release•November 11, 2026

Bendix Upgrades Trailer ABS With Smarter Diagnostics

The new iTABS X system replaces Bendix's TABS-6 Standard trailer ABS, adding faster diagnostics and connectivity that could help fleets identify brake-system problems before they lead to downtime.

Read More →
 Commercial vehicle inspector looking closely at truck engine
Safety & Compliance•by Staff•November 11, 2026

CVSA Sets 2027 International Roadcheck Dates

The annual 72-hour truck inspection blitz will take place May 11–13 across North America. Here's what fleets can expect and what inspectors found during the 2026 event.

Read More →
Ad Loading...
Fleet Management•by Staff•November 10, 2026

What Trucking Events are Happening in 2027?

Looking for trucking-related conventions, expos, and other events? Heavy Duty Trucking has developed this list of national and larger regional trucking shows and events.

Read More →
CVSA inspector looking at brakes underneath truck
Maintenance•by Staff•November 9, 2026

Brake Problems Sideline 15% of Inspected Trucks

During CVSA's 2026 Brake Safety Week, inspectors placed nearly 2,400 commercial vehicles out of service for brake violations, including problems with defective brakes, hoses, drums and rotors.

Read More →
A row of black bottles with red, yellow, blue, and green labels
Sponsored•November 6, 2026

Unlocking the performance advantages of PC-12

2027 will mark the arrival of a new generation of heavy-duty engine oils. PC-12 reflects how far engine design has advanced and the demands that progress places on heavy-duty lubricants. Here’s what the transition means to your fleet.

Read More →
Ad Loading...
A man working on a truck engine, holding a wrench
Sponsored•November 3, 2026

6 Tips for Troubleshooting Cold-Weather Truck Problem: Don't Guess, Diagnose it

Cold weather can expose hidden truck problems. Discover six practical troubleshooting tips to pinpoint the cause, avoid unnecessary repairs and keep trucks on the road.

Read More →
A GP Transco tractor-trailer crosses a bridge over a river, with trailer side skirts visible beneath the white trailer.
Fuel Smarts•by Deborah Lockridge•October 27, 2026

How GP Transco Builds Fuel Savings a Fraction at a Time

Aerodynamic specs, solar panels, and driver incentives help GP Transco turn small efficiency gains into savings it can reinvest in its people.

Read More →
Maintenance•by Deborah Lockridge•October 23, 2026

Oil Crisis Squeezes Trucking Lubricant Supplies

Fleets report higher lubricant costs as Middle East disruptions tighten supplies of ingredients used in synthetic engine oils and some driveline lubricants.

Read More →
Ad Loading...
photos of three Shell heavy-duty engine oil bottles
Maintenance•by News/Media Release•October 16, 2026

Shell Prepares Rotella Oils for 2027

New CL-4 and FB-4 formulations will begin arriving in early 2027, with improved protection against oil breakdown, wear and deposits, according to Shell.

Read More →