Mitsubishi Fuso Bringing Electric eCanter to U.S.
Mitsubishi Fuso Truck of America has introduced the eCanter battery-powered Class 4 truck, offering the first 50 units to a select group of customers by the end of the year on a two-year lease.

Photo by Chris Brown.

Mitsubishi Fuso Truck of America has introduced the eCanter battery-powered Class 4 truck, offering the first 50 units to a select group of customers by the end of the year, the company announced at the NTEA Work Truck Show in Indianapolis.
The electric trucks will be made available in the U.S., Europe, and Japan as part of a two-year lease, allowing companies time to use the vehicle before trading up to the next generation. The company says the trucks will cost 15-20% more than comparable diesel models.
The Class 4 truck has a 100-mile range, 15,995-pound Gross Vehicle Weight rating, and a 9,380-pound payload capacity. The batteries can be quick-charged within an hour at a DC charging station or over the course of eight hours using a 230-volt outlet. The vehicle will also have flexible battery options to allow customers that need less range than 100 miles to opt for fewer batteries and increase payload capacity.
“We believe the eCanter will help us chart the future of medium-duty trucking in urban environments," said Jecka Glasman, Fuso president and CEO. "It delivers up to a 100-mile range, with zero emissions and zero noise pollution — what we call positive energy. We’ve had preliminary conversations with multiple customers and they are enthusiastic about the possibilities this new truck represents.”
The electric motor generates 173 horsepower and 494 lb.-ft. of torque - more torque than the company’s V10 gasoline motor in its Class 6 truck, according to Mitsubishi Fuso. The motor is powered by six batteries, which the company says are preconditioned during charging to ensure the range stays consistent in cold and hot weather. The drivetrain is fitted to a standard 151.6-inch cab chassis that is 33.5 inches wide - similar to the company’s traditional diesel cabovers. This allows the vehicle to be fitted with the same body attachments as some current models - a plus for upfitters.
The vehicle features two-stage electric regenerative braking system, electric HVAC, and a high-capacity power take-off (PTO) for applications that need it.
The Fuso eCanter was originally shown off last year by Daimler Trucks Asia at the IAA Commercial Vehicle Show in Hannover, Germany, aimed at urban delivery in the Southern California and New York City markets.
"Better fuel economy is one aspect, but our customers are telling us how important it is to have a quiet truck in urban environments," said William Lyons, vice president of sales operations. "It is a big concern on [the] quality of life in cities today. This truck addresses that."
More Fuel Smarts

DTNA Software Update Gives Truckers More Time Before DEF Derates Take Effect
The changes reflect EPA guidance aimed at reducing downtime caused by emissions-system faults while maintaining compliance requirements.
Read More →
New Agentic Predictive Maintenance Report Demonstrates How Degraded Aftertreatment Systems Waste Fuel
Questar analyzed a large mixed-class fleet and discovered it was wasting as much as $30 in fuel per vehicle, per day, because of mechanically degraded aftertreatment systems.
Read More →
New York City's Microhub Project is Delivering Results
Trucking, last-mile delivery companies, and environmental advocates like what they are seeing so far with New York's microhub program.
Read More →
Lessons Learned About Alternative Fuels: Start Small, Stay Flexible
Practical advice on adopting alternative fuels and ZEVs from HDT's 2026 Top Green Fleets, from renewable diesel and natural gas to electric trucks.
Read More →
Kempower Adds Flex EV Charger to Help Support Transition to Megawatt Charging
The Kempower Mega Satellite Flex has both a CCS and MCS connector, allowing operators to serve both types of heavy-duty vehicles.
Read More →
Hino Adds Electric Class 6/7 Truck
Hino says the Le Series is an important step in the company's efforts to reduce environmental impact and support its customers’ sustainability goals.
Read More →
Can Multi-Speed EV Transmissions Solve Heavy Trucking’s Biggest Electric-Vehicle Problems?
A startup called Sigma Powertrain believes purpose-built multi-speed gearboxes can boost efficiency, reduce battery size and improve gradeability for heavy-duty battery-electric trucks.
Read More →
Hendrickson Debuts Electraax E-Axle for Medium-Duty Trucks
Developed with Driventic, Hendrickson's new integrated e-axle is designed to improve efficiency, reduce weight, and extend range in Class 6-7 EV applications.
Read More →
50 Ways Fleets Can Cut Fuel Costs Now — Without Buying New Trucks
Fuel savings don’t come from one big change. They come from dozens of small ones. Here’s how leading fleets are stacking gains across drivers, routing, maintenance, and more.
Read More →
Top Green Fleets 2026: How Fleets Are Reducing Emissions in the Real World
What works in sustainable trucking today? Heavy Duty Trucking's Top Green Fleets are finding practical ways to cut fuel use, reduce emissions, and keep freight moving.
Read More →
