Heavy Duty Trucking Logo
MenuMENU
SearchSEARCH

FMCSA Looking to Change How it Determines Motor Carrier Safety Fitness

More than a decade after the Federal Motor Carrier Safety Administration implemented its CSA program to use data to identify potentially unsafe motor carriers, it's again looking at ways to use that data to determine if carriers are fit to operate.

Deborah Lockridge
Deborah LockridgeEditor and Associate Publisher
Read Deborah's Posts
August 25, 2023
FMCSA Looking to Change How it Determines Motor Carrier Safety Fitness

The FMCSA wants to know if CSA/SMS data should be used to determine safety fitness of motor carriers.

Image: HDT Graphic

6 min to read


[Updated 10/23/2023 and 1/12/2024] The Federal Motor Carrier Safety Administration is asking for comments to help it develop a new way to determine when a motor carrier is not fit to operate commercial motor vehicles, also known as a safety fitness determination.

Ad Loading...

On Oct. 23, the agency extended the comment period for 30 days, after three major groups requested extensions. The American Trucking Associations, the Commercial Vehicle Safety Alliance, and the American Bus Association cited the “complexity and breadth” of questions, and ATA wanted time to get member input at its annual management conference, which was near the end of the original comment period.

Ad Loading...

UPDATE: On Jan. 12, 2024, FMCSA posted a notice asking for comments on several research papers it has become aware of. The agency is considering whether it can rely on the information in these reports and studies in developing a proposed or final rule. Comments are due Feb. 12.

In an advance notice of proposed rulemaking, FMCSA is asking for public comment on:

  1. The need to revise the safety fitness determination process.

  2. The available science or technical information that would allow the agency to analyze alternatives for determining the safety fitness of motor carriers.

  3. Feedback on FMCSA’s current safety fitness determination regulations, including the process and impacts.

  4. The available data and costs for regulatory alternatives reasonably likely to be considered as part of this rulemaking.

  5. Responses to specific questions in the ANPRM.

Current Safety Fitness Determination Process

Safety Fitness Determinations currently are determined based on an analysis of existing motor carrier data and data collected during an investigation (referred to as a “compliance review” or more casually as a “DOT audit.”)

It analyzes six factors based on the Federal Motor Carrier Safety Regulations (FMCSRs) and Hazardous Materials Regulations:

  • General

  • Driver

  • Operational

  • Vehicle

  • Hazmat

  • Accident factor (recordable accident rate per million miles)

Ad Loading...

FMCSA calculates a vehicle out-of-service rate, reviews crash involvement, and conducts an in-depth examination of the motor carrier’s compliance with the acute and critical regulations of the FMCSRs and HMRs.

“Acute regulations” are those where noncompliance is so severe as to require immediate corrective action, regardless of the overall safety management controls of the motor carrier. “Critical regulations” are related to management or operational systems controls.

CSA and Safety Fitness Determinations

One of the criticisms of this process is that it is resource-intensive and reaches only a small percentage of motor carriers.

The agency has long hoped to link its Compliance, Safety, Accountability program and its Safety Measurement System to fitness reviews. The SMS is FMCSA’s prioritization system to identify motor carriers for investigation, which went into effect in 2010.

In 2016, FMCSA proposed using a carrier’s absolute measure, but not its relative percentile ranking, in SMS to generate unfit safety fitness determinations. The idea was was to more effectively use FMCSA data and resources to identify unfit motor carriers and remove them from the roads, expanding the number of assessed and rated carriers.

Ad Loading...

That proposal also looked at eliminating the current rating terms of Satisfactory, Unsatisfactory, and Conditional and transitioning to a single determination of Unfit. The agency noted that a carrier getting a Satisfactory safety rating may be misconstrued as an FMCSA approval of the current operations of a motor carrier, when instead, it reflects FMCSA’s evaluation of a motor carrier’s operations at the time of the investigation. And under the current SFD process, a motor carrier with a Conditional rating is not prohibited from operating, even if a review reveals breakdowns in safety management controls in multiple areas.

Motor carriers generally opposed that proposal, saying there were problems with the SMS data that needed to be fixed before it could be used in this manner. And, they said, it violated the Fixing America’s Surface Transportation (FAST) Act. In 2017, FMCSA withdrew the 2016 SFD proposed rule but left the door open to revisiting it in the future.

What Happened to IRT?

The FAST Act required the National Academy of Sciences to conduct an independent study of SMS.

The NAS report, issued in 2017, did find shortcomings. Its main recommendation was that FMCSA develop a complex statistical model known as item response theory. It was believed this system would better measure a carrier’s overall safety culture, rather than the current snapshot-in-time approach for safety determinations.

While initially expressing optimism about the potential for the item response theory model, after developing and testing an IRT model, FMCSA concluded that IRT modeling does not perform well for use in identifying motor carriers for safety interventions.

Ad Loading...

Instead, last year it issued a proposal to revamp the current CSA/SMS model. Those improvements include reorganizing the BASICs to better identify specific safety problems, combining the 958 violations used in SMS in 116 violation groups, simplifying violation and crash severity weights, removing percentile jumps that occur when carriers move into a new safety event group, and adjusting the intervention thresholds.

Learn more about potential CSA/SMS changes:

What FMCSA Wants to Know

FMCSA specifically requests responses to the following questions regarding how it does safety fitness determinations:

  1. Should FMCSA retain the current three-tiered rating system of Satisfactory, Unsatisfactory, and Conditional? Why or why not?

  2. Should FMCSA include additional hazmat regulatory requirements in the SFD calculation?

  3. Currently, the table of regulatory factors excludes parts 172 and 173. However, there are violations in these parts included in the list of critical and acute violations in Appendix B. Should they be included in the SFD calculations?

  4. Should motor carriers of passengers be subject to higher standards than other motor carriers in terms of safety fitness rating methodology?

  5. Is there a specific aspect of safety management, such as driver training, driver fatigue management and mitigation, vehicular maintenance and repair, etc., that is so fundamentally different in passenger transportation from freight carriers that FMCSA’s safety fitness rating methodology should take this aspect into special consideration?

  6. How will states be affected? What resources might be needed to accommodate any changes, and how long would it take to incorporate any proposed changes?

  7. The current SFD does not use all available safety data, such as all inspection-based data. Should the SMS methodology be used to issue SFDs, in a manner similar to what was proposed in the 2016 NPRM? If so, what adjustments, if any, should be made to that proposal? If not, should the agency include more safety data in the SFD process in other ways and, if so, how?

  8. Given the importance of driver behavior in preventing crashes, how would you recommend the agency incorporate driver behavior data into the SFD process?

  9. What changes, additions, or deletions, from the current list of critical and acute violations should be included? Why or why not?

  10. Should Safety Fitness Determinations consider motor carriers’ adoption and use of safety technologies in a carrier’s rating? How should this fit into the SFD methodology? (This appears to be a revisit of a stalled initiative known as “Beyond Compliance” that FMCSA proposed in 2016, which would have given “extra credit,” so to speak, to motor carriers that install advanced safety equipment; use enhanced driver fitness measures; adopts fleet safety management tools, technologies, and programs.)

  11. Should the agency revise the current administrative review procedures?

  12. Given that unsafe driving behaviors, such as speeding and texting while driving, are highly correlated with crash risk, should the safety fitness rating methodology give more weight to unsafe driving violations?

Concerns About the Safety Fitness Determination Proposal

Trucksafe Consulting in a blog post called the proposal “concerning … for many reasons.”

Ad Loading...

“Many studies over the years have demonstrated significant flaws with SMS, flaws which we do not feel the agency adequately addressed in its recently-proposed SMS revisions," wrote transportation attorney Brandon Wiseman.

"Significantly, SMS, as currently structured (and even with the proposed changes) offers carriers no meaningful due process to contest or appeal erroneous violations or other data that weighs on their scores. Thus, it's conceivable a carrier's safety rating (and its ability to continue to operate) could be threatened by incorrect violations or other problematic SMS data, with no real way for the carrier to address it before receiving a proposed Unfit safety rating."

Comments on this notice must be received on or before 60 days after date of publication in the Federal Register, referring to docket number FMCSA-2022-0003.

More Safety & Compliance

Aperia HALO front steer axle.
Safety & Complianceby Jack RobertsMarch 18, 2026

Aperia Expands Halo Platform with Steer-Tire Inflation System, Fifth-Wheel Integration

Aperia Technologies introduced a new automatic tire inflation system for steer axles and a partnership with Fontaine Fifth Wheel to integrate coupling status into its Halo Connect platform.

Read More →
Mobile navigation and in-cab display showing digital roadside safety alerts warning drivers about hazards and emergency vehicles through the Fleetworthy and HAAS Alert integration.

Fleetworthy and HAAS Alert Expand Partnership Stopped Truck Protection Alerts

Fleetworthy and HAAS Alert expanded their partnership to deliver real-time digital alerts that warn motorists when commercial trucks are stopped roadside and notify truck drivers when approaching emergency responders.

Read More →
Illustration of author headshot with black-and-white old-fashioned rig in the background

New Entrants, Chameleon Carriers, and Safety: Is It Too Easy to Start a Trucking Company?

More than 100,000 new trucking companies enter the industry each year, but regulators manage to audit only a fraction of them. That churn creates opportunities for inexperienced startups — and for “chameleon carriers” that shut down after safety violations and reappear under new identities. Read more from Deborah Lockridge in this commentary.

Read More →
Ad Loading...
Mack Protect for MD Series.

Mack Introduces Mack Protect Collision Mitigation System for MD Series

Mack Trucks has expanded its proprietary Mack Protect collision mitigation platform to the Mack MD Series, bringing heavy-duty safety technology to medium-duty trucks operating in urban and regional environments.

Read More →
A mechanic in a workshop leans over the open engine compartment of a large yellow vehicle, inspecting components while holding a tablet.
Sponsoredby Kristy CoffmanMarch 9, 2026

Smarter Maintenance Strategies to Keep Trucks Rolling

In today’s cost-conscious market, fleets are finding new ways to get more value from every truck on the road. See how smarter maintenance strategies can boost uptime, control costs and drive stronger long-term returns.

Read More →
Older white man in suit standing at podium with TCA logo

Bison Transport, Mill Creek Motor Freight Win TCA Fleet Safety Awards Grand Prize

Two Canadian fleets earned the Grand Prize in the Truckload Carriers Association’s 2025 Fleet Safety Awards, recognizing the industry’s top safety performance based on accident frequency and safety programs.

Read More →
Ad Loading...
Illustration with safety cones, false logbooks, CVSA logo

CVSA Issues New Inspection Guidance on ELD Tampering, False Logs

New guidance for commercial vehicle inspectors distinguishes between more traditional logbook violations and tampered ELD data that can result in mandatory 10-hour out-of-service orders.

Read More →
 Truck with door open and enforcement officer talking to driver about ELD
DriversFebruary 26, 2026

FMCSA Reinstates Field Warrior ELD to Registered Device List

One electronic logging device has been reinstated to the FMCSA's list of registered ELDs.

Read More →
Daimler Truck camera system.
Safety & Complianceby News/Media ReleaseFebruary 25, 2026

Daimler Truck North America Adds 360-Degree Exterior Camera System to Vocational, Medium-Duty Trucks

Daimler’s new factory-installed system integrates side and forward-facing cameras with in-cab touchscreen to improve jobsite visibility and reduce upfit complexity.

Read More →
Ad Loading...
Kodiak Autonomous Truck
Safety & Complianceby News/Media ReleaseFebruary 20, 2026

Kodiak Integrates HAAS Alert’s Safety Cloud into Autonomous Trucking Platform

Kodiak has integrated HAAS Alert’s Safety Cloud platform into its autonomous vehicle control system to send real-time digital hazard alerts to nearby motorists.

Read More →