Heavy Duty Trucking Logo
MenuMENU
SearchSEARCH

DTNA Recalls 3,000-Plus Freightliner, Western Star Trucks

The latest trucks to be recalled due to ball studs from a third-party supplier that were improperly heat-treated: More than 3,400 Freightliner and Western Star trucks.

August 12, 2024
Truck Recall graphic

Improperly heat-treated ball studs have resulted in thousands of trucks being recalled.

Image: HDT Graphic

2 min to read


More than 3,000 Freightliner and Western Star trucks have been recalled for possible loss of steering control due to a problem with the tie rod in the front axle. These are the latest trucks to be recalled due to ball studs from a third-party supplier that were improperly heat-treated.

Ad Loading...

Daimler Trucks North America is recalling certain 2025 vehicles, including:

Ad Loading...
  • Freightliner 108SD, manufactured between April 22 and June 26, 2024

  • Freightliner 114SD, manufactured between May 20 and July 2, 2024

  • Freightliner Business Class M2, manufactured between April 22 and July 20, 2024

  • Freightliner Cascadia, manufactured between April 15 and July 11, 2024

  • Western Star 47X, manufactured on June 21, 2024

While the number of vehicles potentially involved is 3,421, Freightliner said only 1% are estimated to have the defect.

In June, Paccar recalled nearly 3,900 medium- and heavy-duty trucks with diesel powertrains for a steering issue that could cause a loss of control. That number recently grew to 7,400.

In addition, Navistar recalled more than 500 International trucks due to incorrectly heat-treated ball studs from the same third-party supplier, USK International.

USK mixed ball studs with an unvalidated heat treat process into normal production flow.

Ad Loading...

DTNA Tie Rod Recall

In the latest recall, DTNA explains that the tie rod in the front axle may contain ball studs that have been incorrectly heat-treated, which can cause them to break, and result in tie rod failure.

The affected vehicles were equipped with specific Meritor front axles built in DTNA’s Saltillo and Santiago plants and with front axle tie rod assemblies that may have incorporated ball studs that were not properly heat-treated by a sub-supplier.

On the affected vehicles, if one or more of the ball studs crack and the crack propagates to the point of failure, this could lead to a separation of the tie rod connection and could result in a partial loss of steering ability without warning, which can increase the risk of a crash.

DTNA is not aware of any warranty claims, customer complaints or reports of injury or death potentially related to this issue.

Dealers will replace the tie rod assembly, free of charge. Owner notification letters are expected to be mailed September 29, 2024. Owners may contact DTNA customer service at 800-745-8000. DTNA's number for this recall is F1007.

More Maintenance

Illustration of a piston with engine oill and API logo
MaintenanceApril 9, 2026

API Formally Approves Next-Gen Engine Oil Category for 2027 Engines

Heavy-duty engine oil marketers can begin finalizing formulations and preparing product packaging to meet the new oil specifications ahead of the January 1 licensing date.

Read More →
Photo of back of aluminum flatbed trailer on show floor
Equipmentby Deborah LockridgeApril 2, 2026

Fontaine Expands Flatbed Lineup with New Fleet-Focused Models, Eyes 2027 Launch

Fontaine is broadening its flatbed lineup with new models aimed at fleets, including a lightweight aluminum trailer expected in 2027 that emphasizes durability, repairability, and lower cost.

Read More →
Illustration of predictive maintenance
Maintenanceby News/Media ReleaseMarch 31, 2026

Fullbay Acquires Pitstop to Strengthen AI-Powered Predictive Maintenance

Pitstop AI will use Fullbay's extensive shop data to drive predictive maintenance for trucking fleets and repair shops.

Read More →
Ad Loading...
Collage of Top 20 Product award ceremonies
EquipmentMarch 31, 2026

HDT Honors the Best New Products of 2025 at TMC [Photos]

Heavy Duty Trucking's Top 20 Products awards recognize the best new products and technologies. Check out the award presentations at the 2026 Technology & Maintenance Council annual meeting.

Read More →
freightliner whitepaper
SponsoredMarch 31, 2026

Detroit Engines: Trusted Performance, Built for What's Next

The Detroit® Gen 6 engine platform proves that real progress doesn’t require a complete redesign. Built on 20 years of trusted technology, these engines are designed for efficiency, stronger performance, and greater reliability than before. And they do it all while complying with 2027 EPA standards on every mile.

Read More →
Illustration showing diesel exhaust fluid pump sign and EPA headquarters
Equipmentby Deborah LockridgeMarch 30, 2026

EPA Targets DEF Sensor Failures Behind Truck Derates

New guidance allows engine makers to replace problematic DEF sensors with NOx-based systems, aiming to reduce unnecessary derates and downtime caused by failures in the sensors designed to monitor diesel exhaust fluid on trucks.

Read More →
Ad Loading...
Goodyear steer tire on display at booth
Maintenanceby Deborah LockridgeMarch 25, 2026

Goodyear Targets ‘Super-Regional’ Sweet Spot with New Steer Tire

Goodyear is preparing to roll out a new steer tire designed to bridge the gap between regional and linehaul for trucking fleets.

Read More →
Hendrickson TireMaax Pro Watchman
Maintenanceby Jack RobertsMarch 25, 2026

Hendrickson Unveils Watchman Smart Wheel-End System at TMC

Hendrickson’s new sensor platform integrates with its TireMaax system to deliver real-time tire and wheel-end insights, targeting uptime and cost savings.

Read More →
Volvo VNL.
Maintenanceby Jack RobertsMarch 24, 2026

Over-the-Air Updates and the Modern Powertrain Explained

Over-the-air updates are moving beyond recalls, and expanding how fleets manage performance, compliance, and uptime.

Read More →
Ad Loading...
SKF TraX wheel monitoring system.
Maintenanceby Jack RobertsMarch 24, 2026

SKF, TMC Expand Hands-On Training to Boost Technician Skills at Annual Meeting

A new partnership between SFK and TMC brings certified, on-site instruction focused on wheel-end reliability and maintenance best practices.

Read More →