Automated Truck Weight Enforcement Comes to the Big Apple
New York City’s automated weight enforcement program for overweight trucks has already brought safer conditions to an aging half-mile portion of I-278.

New York City's Weigh-in-Motion program has led to a 64% reduction in overweight vehicles along the triple cantilever of the Brooklyn Queens Expressway.
Photo: Helena Lopes
New York City Department of Transportation (NYC DOT) Commissioner Ydanis Rodriguez announced that the nation's first automated enforcement program against overweight trucks has been a success. Known as the Weigh-in-Motion (WIM), Rodriguez said the program has already led to a 64 percent reduction in overweight vehicles along the triple cantilever of the Brooklyn Queens Expressway (BQE).
Inground Sensor Technology
NYC DOT currently operates WIM enforcement on the Queens-bound portion of the BQE triple cantilever in downtown Brooklyn, a portion of the I-278 highway known as "BQE Central."
During the first seven months of automated enforcement, a monthly average of 2,769 overweight trucks crossed the triple cantilever. Prior to the launch, a monthly average of 7,777 overweight trucks had traveled the same portion of the highway the seven months leading up to the launch of the program.
"New York City is leading the nation in efficiently and effectively keeping overweight trucks off the road through inground sensors on the BQE," said deputy mayor Meera Joshi. "This transformational technology protects and prolongs the lifespan of our critical infrastructure, like the triple cantilever portion of the BQE, and improves safety for all road users. We're grateful to our legislative partners who enabled this impactful program and look forward to expanding its use in New York City."
"Last year, we launched the nation's first automated enforcement program to protect the Brooklyn Queens Expressway from overweight vehicles – and it has yielded dramatic results," Rodriguez added. "Thanks to cutting edge roadway sensors, we have reduced the number of overweight vehicles on the BQE by 64 percent, reducing wear and tear on this critical infrastructure and extending its useful life."
The decline comes as the overall number of vehicles, including trucks, remains steady, with the share of overweight trucks falling from about 6.3 percent of all trucks on the roadway to 1.9 percent in most recent months.
The automated enforcement program on the BQE is in effect on the city-owned section of the BQE, between Atlantic Avenue and Sands Street, and was authorized by the enactment of S6246/A6225, sponsored by New York State Senator Andrew Gounardes and New York State Assemblymember Jo Anne Simon, and signed into law by New York Governor Kathy Hochul on July 28, 2023. Council Member Lincoln Restler also led the passage of a home rule message from the New York City Council in support of the state legislation.
Additional WIM Efforts Planned
Following the success of Queens-bound enforcement on the BQE, NYC DOT plans to launch WIM enforcement for Staten Island-bound traffic by the end of 2024. As with the Queens-bound portion last year, activation of violations will follow a well-publicized 90-day warning period.
"I'm pleased to see that WIM enforcement is working to prevent costly damage to Brooklyn's infrastructure," said Brooklyn Borough President Antonio Reynoso. "While we need to ensure that overweight trucks do not cause additional damage, it remains critical that we reimagine the BQE from top to bottom. I thank the NYC DOT for the success of their WIM enforcement and look forward to continued collaboration with government partners and community members to reimagine the BQE."
"As we consider the future of the BQE, I commend the NYC Department of Transportation for taking innovative steps to significantly lower the number of overweight trucks using the triple cantilever portion, whose structural integrity is increasingly at risk because of their passage," said Congressman Dan Goldman. "This automated enforcement measure has improved road safety for the surrounding communities and commuters alike, providing more time to solicit community input for any future redesign of the structure. As we chart a path forward, I will continue partnering with city, state, and federal officials to ensure any reimagining of the BQE brings equity, fairness, and justice for those adversely affected by the highway."

During Weigh-in-Motion's first seven months in operation, the system tracked a monthly average of 2,769 overweight trucks.
Graphic: NYDOT
"I'm thrilled that our first-in-the-nation WIM program is successfully getting rid of illegally overweight trucks that have caused significant damage to the BQE triple cantilever and to our environment," said Assemblymember Jo Anne Simon. "The WIM program will help extend the useful life of the BQE and give us time to reimagine the BQE as a 21st-century transportation corridor that reduces our reliance on polluting trucks and prioritizes climate justice. I'm proud of the effective collaboration between the city and state to enact my law and implement this innovative program. Thanks to NYC DOT for implementing WIM and to the BQE expert panel who first recommended we consider this technology."
"Weigh-in-Motion technology has successfully eliminated two out of three overweight trucks that had been illegally driving on the Queens bound portion of the triple cantilever of the BQE. We hope to see a similar reduction on the Staten Island side when it is finally implemented to help extend the lifespan of the triple cantilever structure," said Councilmember Lincoln Restler.
More Safety & Compliance

Brake Safety Week to Focus on Drums and Rotors
Commercial vehicle inspectors will be focusing on brakes during CVSA's Brake Safety Week, August 23-29.
Read More →
Trump Administration Looks to Put More Veterans Behind the Wheel
The Freedom Haulers program pulls together existing and expanded programs at several federal agencies to recruit veterans to drive commercial heavy-duty trucks and cut the red tape for them to get a CDL, training, and employment.
Read More →
$604 Million Verdict Tests Broker Liability After Supreme Court Ruling
C.H. Robinson plans to appeal after a Texas jury found it bore the largest share of responsibility for a fatal 2021 crash, in a case that follows the Supreme Court's Montgomery decision allowing negligent hiring claims against freight brokers.
Read More →
How Fraley & Schilling Improved Logbook Compliance by Over 50%
Fraley & Schilling needed a way to close a compliance workflow gap in its ELD system without adding more work from driver training, reminders, and back-office follow-ups. It found the answer in a custom driver app.
Read More →
Farewell, CDL: Why I'm Giving Up My Commercial Driver's License
After more than 20 years as a CDL holder, HDT Executive Editor Jack Roberts is letting his commercial license expire. Not because he wants to — but because trucking's nuclear verdict crisis has made the risks of public-road test drives too great for editors, manufacturers, and everyone involved.
Read More →
Enhance Fleet Performance with High-Efficiency Auxiliary Power Units
Drive sustainable cost savings while increasing driver comfort during short- and long-haul logistics operations.
Read More →
Wabash Trailers Recalled for Improperly Installed Underride Guards
More than 900 Wabash dry van trailers may not comply with the Federal Motor Vehicle Safety Standard for rear impact guards.
Read More →
Why K&B Trucking Is Embracing AI and Driver Safety Technology
Crunching data and embracing artificial intelligence are key in K&B Trucking's safety efforts, says the company's safety director.
Read More →
The Hidden Problem Behind FMCSA's ELD Revocations
NMFTA researchers say dozens of registered ELDs may be built on the same software platforms, allowing compliance and security concerns to persist even after individual devices are removed from the market.
Read More →
ATRI Wants Motor Carriers for Driver-Facing Camera Study
In this new study, the American Transportation Research Institute will explore how driver-facing cameras can impact safety and operational metrics in trucking fleets.
Read More →
