Changes to truck driver hours of service rules, designed to offer drivers more flexibility, take effect at 12 a.m. eastern time on Sept. 29.
New Hours of Service Rules Take Effect Sept. 29
Changes to truck driver hours of service rules, designed to offer drivers more flexibility, take effect at 12 a.m. eastern time on Sept. 29.

Most ELD providers have been working with customers to make sure their devices are ready for the rule change.
Photo: Rand McNally
The rules take effect at the same time regardless of time zone, meaning they will go into effect earlier for drivers in other time zones – drivers on the West Coast, for instance, will start operating under the new rules at 9 p.m. Sept. 28.
The changes, which were announced in May, made four key revisions to the HOS rules:
1. The 30-minute break rule, which previously required a break after no more than eight hours of on-duty time, now must be taken after no more than eight hours of consecutive driving time. In addition, the break requirement may be satisfied by the on-duty/not driving status, rather than off-duty status. That means a driver’s “break” could be satisfied by stopping to fuel the truck, for instance.
2. The sleeper berth rules, which previously only allowed a split of the required 10 hours of off-duty time up to two hours for the shorter split period, will now allow drivers to take up to three hours for the shorter split period, with neither period counting against the driver’s 14‑hour driving window.
3. The new rule changes the adverse driving conditions exception by extending by two hours the maximum window during which driving is permitted. The current rule allows for an extra two hours of driving time, but it still had to be within the maximum 14-hour workday. The new rule allows the workday to be extended to as much as 16 hours in the case of adverse conditions such as extreme weather or congestion.
4. The agency will expand the short-haul exception available to certain commercial drivers by lengthening the drivers’ maximum on‑duty period from 12 to 14 hours and extending the distance limit within which the driver may operate from 100 air miles to 150 air miles.
Agency officials emphasized that the rule changes do not increase driving time and will continue to prevent CMV operators from driving for more than eight consecutive hours without at least a 30-minute break.
One change that was included in last year’s proposed rule that did not make the final cut was allowing an off-duty break of at least 30 minutes, but not more than three hours, that would pause a truck driver’s 14-hour on-duty window, provided the driver takes 10 consecutive hours off-duty at the end of the work shift. This would allow, for instance, drivers to take up to a three-hour break to wait out rush hour, without it affecting their maximum on-duty time.
However, the agency recently proposed a pilot program to study the effects of allowing drivers to pause their on-duty driving period with one off-duty period up to three hours.
More Safety & Compliance

Aperia Expands Halo Platform with Steer-Tire Inflation System, Fifth-Wheel Integration
Aperia Technologies introduced a new automatic tire inflation system for steer axles and a partnership with Fontaine Fifth Wheel to integrate coupling status into its Halo Connect platform.
Read More →
Fleetworthy and HAAS Alert Expand Partnership Stopped Truck Protection Alerts
Fleetworthy and HAAS Alert expanded their partnership to deliver real-time digital alerts that warn motorists when commercial trucks are stopped roadside and notify truck drivers when approaching emergency responders.
Read More →
New Entrants, Chameleon Carriers, and Safety: Is It Too Easy to Start a Trucking Company?
More than 100,000 new trucking companies enter the industry each year, but regulators manage to audit only a fraction of them. That churn creates opportunities for inexperienced startups — and for “chameleon carriers” that shut down after safety violations and reappear under new identities. Read more from Deborah Lockridge in this commentary.
Read More →
Mack Introduces Mack Protect Collision Mitigation System for MD Series
Mack Trucks has expanded its proprietary Mack Protect collision mitigation platform to the Mack MD Series, bringing heavy-duty safety technology to medium-duty trucks operating in urban and regional environments.
Read More →
Smarter Maintenance Strategies to Keep Trucks Rolling
In today’s cost-conscious market, fleets are finding new ways to get more value from every truck on the road. See how smarter maintenance strategies can boost uptime, control costs and drive stronger long-term returns.
Read More →
Bison Transport, Mill Creek Motor Freight Win TCA Fleet Safety Awards Grand Prize
Two Canadian fleets earned the Grand Prize in the Truckload Carriers Association’s 2025 Fleet Safety Awards, recognizing the industry’s top safety performance based on accident frequency and safety programs.
Read More →
CVSA Issues New Inspection Guidance on ELD Tampering, False Logs
New guidance for commercial vehicle inspectors distinguishes between more traditional logbook violations and tampered ELD data that can result in mandatory 10-hour out-of-service orders.
Read More →
FMCSA Reinstates Field Warrior ELD to Registered Device List
One electronic logging device has been reinstated to the FMCSA's list of registered ELDs.
Read More →
Daimler Truck North America Adds 360-Degree Exterior Camera System to Vocational, Medium-Duty Trucks
Daimler’s new factory-installed system integrates side and forward-facing cameras with in-cab touchscreen to improve jobsite visibility and reduce upfit complexity.
Read More →
Kodiak Integrates HAAS Alert’s Safety Cloud into Autonomous Trucking Platform
Kodiak has integrated HAAS Alert’s Safety Cloud platform into its autonomous vehicle control system to send real-time digital hazard alerts to nearby motorists.
Read More →
