Heavy-Duty Truck Orders Still Red Hot Despite 12,000-Unit Drop
Early reports are showing that heavy-duty truck orders likely dropped as much as 12,000 units from March to April, but despite that being the largest single-month decline since 2011, analysts are still calling the market for Class 8 equipment hot.

April heavy- and medium-duty truck orders were down compared to the peak in March, but analysts say the market is still red hot.
HDT graphic
Early reports are showing that heavy-duty truck orders likely dropped as much as 12,000 units from March to April, but despite that being the largest single-month decline since 2011, analysts are still calling the market for Class 8 equipment hot.
In its preliminary report for April, FTR estimates April Class 8 truck orders at 34,700 units while ACT Research projects orders at 34,800 units. Those projections are down significantly from March, but only because that month’s order numbers were historically high. For three straight months, Class 8 orders topped 40,000 units. And while April’s numbers look to miss the mark, they are still 50% higher than the same month in 2017.
“In ACT’s 30-plus years of collecting industry statistics, the Class 8 market has never had four consecutive months in which orders exceeded 40,000 units,” said Kenny Vieth, ACT president and senior analyst. “Preliminary data indicate that the wall remains in place as 34,800 Class 8 net orders were booked in April, stopping the latest string of 40k-plus order months at three.”
Demand for trucks is still at record levels as fleets continue to try to add capacity as fast as possible. In the past 12 months, Class 8 truck orders have totaled 368,000 units, according to FTR.
April Class 5-7 medium-duty truck orders remained solid, but were a bit below levels seen through the first three months of the year. Net orders were down 16% compared to March, but they were up 33% year-over-year at 24,800 units.
"These order levels will continue to put pressure on the OEMs and suppliers to increase production and output,” said Jonathan Starks, chief intelligence officer at FTR. “The market will stay red hot into 2019. The question remains: how hot can they run?"
Related: First Quarter 2018 Truck Orders Hit 12-Year High
More Equipment

Atlas Expands Kodiak Driverless Truck Fleet in Permian Basin
Atlas Energy Solutions is expanding autonomous frac sand hauling in the Permian Basin with a second load-out location and plans for 100 driverless trucks by mid-2027.
Read More →
Putting Mack’s Command Steer to the Test
A test drive of Mack’s Command Steer active steering system evaluates how it can make truck driving easier and less tiring.
Read More →
Mack, Volvo Expand DEF Derate Software Updates
The updated software gives Mack and Volvo truck owners more time to address DEF-related issues before the engine derates or the vehicle goes into reduced-speed inducement, following new EPA guidance.
Read More →
Rush, MCT Team Up to Grow Refrigeration Service Network
The joint venture will operate MCT's network of Carrier Transicold dealerships and mobile service locations, with the companies promising greater service capacity and uptime for refrigerated fleets.
Read More →
Cummins Adjusts 2027 Engine Rollout After EPA Proposal
The engine maker will gradually introduce its new Model Year 2027 diesel engines while continuing to offer current models during the transition, citing the EPA's proposed emissions rule changes.
Read More →
Aurora Rolls Out Next Generation of Driverless Trucks for Commercial Freight
Aurora's latest autonomous trucks it's rolling out with International feature lower-cost hardware designed for a million miles as the company expands commercial driverless freight operations across the U.S. Sun Belt.
Read More →
Peterbilt 589 Spotlight: A Close Look at a Custom Working Truck [Video]
There's more to this customized Peterbilt Model 589 and Great Dane refrigerated trailer than chrome and stainless (although there's plenty of that too!) A veteran driver explains the design choices and practical features behind this working truck.
Read More →
Continental Expands Retread Lineup With New ContiTread HDL 5 EP
New long-haul drive retread is designed to improve fuel efficiency, extend tread life, and lower fleets' cost per mile.
Read More →
EPA Proposal Could Ease 2027 Truck Costs and Buying Uncertainty
The proposal doesn't change the tougher NOx standard, but it would revise key implementation requirements that manufacturers say have driven up costs and complicated fleet purchasing decisions.
Read More →
Cummins, Paccar Ease DEF Derates After EPA Guidance
Updated diesel engine software gives truck operators more time to address emissions-system issues while staying compliant with EPA emissions standards.
Read More →
