If you see Steve Kron’s 2001 International IHC 9400, you’ll likely do a double-take. Kron has heavily modified the truck over the years, including non-OEM aerodynamic headlights, and a bumper and fenders he pulled off a 2011 Mack Vision. And that’s just the exterior.
How A Frankenstein Truck Averages Over 9 MPG
Steve Kron’s heavily modified 2001 International IHC 9400 routinely logs 10 mpg and has a million-plus mile lifetime average of 9.21 mpg.

Steve Kron’s heavily modified 2001 International IHC 9400 routinely logs 10 mpg and has a million-plus mile lifetime average of 9.21 mpg.
Photo: Steve Kron
Look under the sheet metal and you’ll find a 6x2 drive axle with a 2:50 ratio from of a 2007 International ProStar. Pull the hood open and you’ll see a variable geometry turbocharger from a recent DD15 diesel engine fitted to his 2001 Detroit Diesel. And those are just a few of the most high-profile modifications. The truck is fitted with dozens of others, both major and minor, including several homemade, one-off aerodynamic components.
“People either love it or they hate it,” Kron says with a chuckle. But don’t be too quick to laugh. Kron routinely logs over 10 mpg and claims a lifetime average of 9.21 mpg over more than 1 million miles. And he’s racking up those numbers with an Eaton 10-speed manual transmission and almost none of the high-tech aids many drivers take for granted.
So what’s his secret? Kron says it’s simply driving as slowly as time, productivity and conditions allow. “I try to run between 57 and 59 mph as much as possible,” he says. “I might get up to 62 mph. But if you start getting above that, you need really good aerodynamics to get good fuel economy.”
Kron says the advent of mandatory electronic logging devices to track driver hours has forced him to drive faster than he’d like to at times.
“You don’t always have the luxury of focusing on fuel economy,” he says. “Because you’ve got to make money. And sometimes, there’s no choice but to make up time. You might only need another half an hour to get your work done. But now, there’s no way to make that time up,” without the ability to “fudge” his end time, as he would have using paper logs.
Even at his slower pace, Kron says he still is easy on the pedal at all times – particularly at slow speeds, when even slight throttle inputs can exponentially increase the rate of fuel flowing through the engine.
“You can have the most fuel-efficient truck in the world, but if you’re jackrabbit-starting all the time and speeding, you’re not going to get good fuel economy,” he says. “I also work the hills. I don’t go too fast down them and let gravity do most of the work getting me back to 55 mph.”
Another big no-no in Kron’s book is braking, which he only does when safety or circumstances require it.
“Almost every time you step on the brakes, you’re going to have burn fuel to regain whatever momentum you lost. So you need to minimize that disadvantage as much as possible by looking ahead and planning accordingly. The trick is to maintain as much forward momentum as possible while being as safe as possible.”
More Fuel Smarts

Vanair Introduces Solar, Battery Power Ecosystem for Class 8 Trucks
The company’s expanded EPEQ ecosystem includes flexible solar panels, lithium batteries, hydraulic power systems, and a portable fast charger for electric trucks.
Read More →
Run on Less “Messy Middle” Data Shows Multiple Paths for Truck Powertrains [Listen]
Listen as Mike Roeth of the North American Council for Freight Efficiency shares insights into battery-electric trucks, natural gas, biofuels, and clean diesel on this episode of HDT Talks Trucking.
Read More →
Run on Less “Messy Middle” Data Shows Multiple Paths Forward for Truck Powertrains [Watch]
NACFE's Run on Less - Messy Middle project demonstrates the power of data in helping to guide the future of alternative fuels and powertrains for heavy-duty trucks.
Read More →
Trucking Executive Warns Fuel Spike from Middle East Conflict Hitting Fleets Fast
Mike Kucharski, vice president of refrigerated carrier JKC Trucking, says diesel price jumps tied to global instability are squeezing carriers already struggling with weak freight rates.
Read More →
Smarter Maintenance Strategies to Keep Trucks Rolling
In today’s cost-conscious market, fleets are finding new ways to get more value from every truck on the road. See how smarter maintenance strategies can boost uptime, control costs and drive stronger long-term returns.
Read More →
Researchers Demonstrate Wireless Charging of Electric Heavy-Duty Truck at Highway Speeds
Purdue researchers demonstrated a high-power wireless charging system capable of delivering energy to electric heavy-duty trucks at highway speeds, advancing the concept of electrified roadways for freight transportation.
Read More →
EPA Wants to Know: Are DEF De-Rates Really Needed for Diesel Emissions Compliance?
The Environmental Protection Agency is asking diesel engine makers to provide information about diesel exhaust fluid system failures as it considers changes to emissions regulations.
Read More →6 Dashcam Tactics to Improve Safety & ROI
6 intelligent dashcam tactics to improve safety and boost ROI
Read More →
California: Clean Truck Check Rules Still in Force for Out-of-State Trucks, Despite EPA Disapproval
The Environmental Protection Agency said California can’t enforce its Heavy-Duty Inspection and Maintenance Regulation, known as Clean Truck Check, on vehicles registered outside the state. But California said it will keep enforcing the rule.
Read More →
Justice Department Pulls Back on Criminal Prosecution of Diesel Emissions Deletes
The Trump administration has announced it will no longer criminally prosecute “diesel delete” cases of truck owners altering emissions systems in violation of EPA regulations. What does that mean for heavy-duty fleets?
Read More →
