Related: FTR: Don't Look for Positive Trucking Conditions Again Until 2021
FTR, ACT Research Report on Historic Class 8 Orders Drop
North American Class 8 orders took another plunge in April to an unprecedented level of 4,000 units, according to new reports from FTR and ACT Research.

Class 8 orders dropped significantly in April, with many fleets cancelling orders which were scheduled for near-term deliveries.
Source: FTR
North American Class 8 orders took another plunge in April to an unprecedented level of 4,000 units, according to new reports from FTR and ACT Research. April order activity was the lowest since 1995, with FTR and ACT showing April to be 44% and 46% below March numbers and 73% and 72% lower than a year ago, respectively. Total Class 8 orders for the last 12 months now total only 160,000 units.
“Despite all the economic calamity and a significant number of cancellations, Class 8 orders managed to generate a gain in April,” said Don Ake, vice president commercial vehicles. “OEM production was shut down for most of April, yet order activity endured. There still are a few fleets that need new trucks. We expect retail sales to be somewhat higher than expected in April.”
According to FTR, fleets are delaying their trucks orders to see how the COVID-19 crisis will affect the economy in the short and long term, with many cancelling orders which were scheduled for near-term deliveries. While orders are expected to rise in May to around 10,000 units, Class 8 order activity after that is highly dependent on the speed and strength of the economic recovery.
“April represents the first full month of COVID-19 impacts on the trucking industry, and given broadly halted economic output leading to a sharp drop in freight volumes and rates, as well as more empty miles from fragmented supply chains further impacting carriers’ profitability, a negative order number was within the realm of possibilities,” said Kenny Vieth, ACT’s president and senior analyst. "From a seasonal perspective, April is a relative neutral Class 8 order month, and as such, seasonal adjustments adds little to actual data. On that basis, April was the weakest Class 8 order month since September of 1995, which actually produced a negative net order number.”
More Equipment

NHTSA Moves to Rewrite Truck Fuel-Economy Rules
The National Highway Traffic Safety Administration says it lacks authority to regulate medium- and heavy-duty truck engines separately from complete vehicles, but the existing standards have not yet been eliminated.
Read More →
Detroit Opens Orders for EPA 2027 Engines
Detroit isn’t starting from scratch to meet EPA 2027 diesel emissions standards. Its Gen 6 DD13 and DD15 engines keep much of today’s platform while updating the fuel and aftertreatment systems.
Read More →
Carrier Transicold Adds All-Electric TRU for Stationary Cold Storage
Carrier Transicold’s new Vector 8200 all-electric transport refrigeration unit gives fleets a diesel-free option for temporary refrigerated and frozen trailer storage.
Read More →A Closer Look at Kenworth’s Electric T880E Vocational Truck [Video]
Learn more about Kenworth's T880E battery-electric vocational truck at the Paccar Technical Center, including its range, applications, upfitting considerations, and PTO options, in this HDT Spotlight video.
Read More →
Kenworth T880E Brings EV Power to Vocational Trucks
A closer look at the Kenworth T880E’s range, charging, powertrain and upfit options — and where fleets are showing the most interest.
Read More →
What the U.S.-Canada Trade War Means for Trucking
Escalating U.S.-Canada tariffs could disrupt cross-border freight, reduce truck volumes, raise costs, and create new uncertainty for carriers on both sides of the border.
Read More →
Autonomous Truck Testing Moves Ahead in California as Teamsters Challenge Rules
California has begun permitting heavy-duty autonomous truck testing, with Aurora and Kodiak among the first to receive approval, as the Teamsters sue the DMV over the new regulations.
Read More →Behind the Wheel of the New Mack Anthem [Video]
HDT takes the new Mack Anthem around Mack’s Pennsylvania test track to see how its driver-focused design, technology, visibility and handling perform from behind the wheel.
Read More →
DTNA Plans New U.S. Truck Plant as Manufacturing Footprint Shifts
Daimler Truck North America is evaluating sites for a new assembly plant expected to open in 2029 while winding down operations at its longtime Portland manufacturing facility.
Read More →
Great Dane Flatbed Trailer Offers Light Weight and Strength
Freedom Ultra is designed for a wide range of open-deck applications, including building materials, lumber, machinery, steel products, industrial freight, and coil hauling.
Read More →
