The federal government released interim guidelines for cleaning a truck cab when a driver is visibly ill with the flu
.
According to the guidelines, flu viruses can live on nonporous surfaces for 24 hours or more, but enough quantities for human infection are likely to live for shorter periods. Any type of hand transfer by touching the eyes, nose and mouth can result in the spread of the virus. This spread can be avoided through hand hygiene, cough etiquette and respiratory hygiene. The guidelines recommend routine cleaning with soap or detergent and water, followed by the use of disinfectants to minimize the spread of the flu.
When cleaning the cab of a truck, the following cleaning methods should be used:
• Cleaners should use appropriate personal protective equipment (PPE), such as non-sterile disposable gloves that are recommended by the manufacturer of the detergent/disinfectant, when touching contaminated surfaces or handling cleaning and disinfecting solutions. Never wash or reuse the gloves. Eye protection may be required if splashing is expected.
• Many of the non-porous surfaces in the cab and associated compartments can be cleaned with detergent and water according to the vehicle manufacturer's recommendations. Frequently touched surfaces should be cleaned first and then disinfected using an EPA-registered disinfectant.
• Disposable or reusable plastic covers can be used to protect porous surfaces such as mattresses from contamination.
• If there is a spill of body fluids, immediately cover the spill with an absorbent gelling powder designed for spills of body fluids or if this is not available, disposable paper towels/cloths. Wearing non-sterile, disposable gloves, place residuals, used gelling agent and waste cloths in leak-proof bags, immediately seal and carefully dispose in covered containers. Hard, non-porous surfaces may then be cleaned and disinfected as described above. Since disinfectants are not registered for use on porous surfaces, removable porous upholstery, rugs and carpeting that have been exposed to vomit or feces should be carefully removed and laundered in accordance with the manufacturer's instructions or disposed of as described below. Porous upholstery and carpeting that can't be removed may be initially cleaned with water and detergent. The material should then be allowed to air dry.
• Dispose of gloves and soiled material in a sturdy, leak-proof bag that is tied shut and not reopened. Porous materials that will be laundered can be removed from the truck in the same manner. State and local governments should be consulted for appropriate disposal decisions.
• When cleaning has been completed and gloves have been removed, immediately clean hands with soap and water. If soap and water are not readily available, use an alcohol-based hand gel and wash hands with soap and water as soon as possible.
• Do not use compressed air and/or water under pressure for cleaning, or any other methods that can cause splashing or which might re-aerosolize infectious material. Vacuum cleaners should only be used after proper disinfection has taken place.
To view the entire guidance, click here.
Government Releases Flu Cleaning Procedures for Truck Cab
The federal government released interim guidelines for cleaning a truck cab when a driver is visibly ill with the fl
More Safety & Compliance

Avoiding Winter Pileups: Don’t Become the Next Link in the Crash-Chain
Winter roadway “pileups” aren’t one crash — they’re a chain reaction. Here’s what triggers them, how truck drivers can spot the danger early, and what to do if you're suddenly trapped in the mess.
Read More →
FMCSA’s Motus System Is Coming. What Fleets Need to Know Now
The long-awaited registration system promises a single portal — and tighter fraud controls.
Read More →
Nominations Open for HDT Truck Fleet Innovators 2026
Heavy Duty Trucking is searching for forward-looking leaders at trucking fleets as nominations for HDT’s Truck Fleet Innovators 2026. Deadline is May 15.
Read More →
Freightliner Expands Detroit Assurance with New Intersection and Turning Safety Tech
Detroit’s next-generation ABA6 safety system adds cross-traffic detection and enhanced side guard assist with left-turn protection, targeting high-risk urban scenarios.
Read More →
'Beyond Compliance,' Regulations, Driver Coaching on ATRI’s 2026 Research List
The American Transportation Research Institute will examine driver coaching, regulatory impacts — including the "Beyond Compliance" concept —and weather disruptions that shape trucking operations.
Read More →
FMCSA Revamps DataQs to Improve Fairness, Speed of Reviews
New requirements add firm deadlines and independent review steps, addressing long-standing complaints about inconsistent rulings and slow response times.
Read More →
FMCSA Extends Paper Medical Card Exemption … Again
Five states still aren't ready to accept commercial driver medical exam information directly from the medical examiner's registry.
Read More →
HDT Honors the Best New Products of 2025 at TMC [Photos]
Heavy Duty Trucking's Top 20 Products awards recognize the best new products and technologies. Check out the award presentations at the 2026 Technology & Maintenance Council annual meeting.
Read More →
Detroit Engines: Trusted Performance, Built for What's Next
The Detroit® Gen 6 engine platform proves that real progress doesn’t require a complete redesign. Built on 20 years of trusted technology, these engines are designed for efficiency, stronger performance, and greater reliability than before. And they do it all while complying with 2027 EPA standards on every mile.
Read More →
Aperia Expands Halo Platform with Steer-Tire Inflation System, Fifth-Wheel Integration
Aperia Technologies introduced a new automatic tire inflation system for steer axles and a partnership with Fontaine Fifth Wheel to integrate coupling status into its Halo Connect platform.
Read More →
