Heavy Duty Trucking Logo
MenuMENU
SearchSEARCH

EPA Wants to Know: Are DEF De-Rates Really Needed for Diesel Emissions Compliance?

The Environmental Protection Agency is asking diesel engine makers to provide information about diesel exhaust fluid system failures as it considers changes to emissions regulations.

Deborah Lockridge
Deborah LockridgeEditor and Associate Publisher
Read Deborah's Posts
February 3, 2026
Illustration showing diesel exhaust fluid pump sign and EPA headquarters

The EPA is demanding information from major diesel engine manufacturers on critical data from DEF system failures.

Credit:

HDT Graphic

3 min to read


  • The EPA is seeking input from diesel engine manufacturers regarding failures in diesel exhaust fluid systems.
  • This is part of the EPA's considerations for changing emissions regulations.
  • The agency is questioning the necessity of diesel DEF de-rates for maintaining emissions compliance.

*Summarized by AI

The Environmental Protection Agency is asking diesel engine makers to provide information about diesel exhaust fluid system failures as it considers changes to emissions regulations.

The move is a follow-up to the EPA’s guidance last August to address the frustration experienced by truckers when DEF system failures result in sudden speed losses and shutdowns.

Ad Loading...

That guidance called on manufacturers to revise DEF system software in existing fleets to prevent these sudden shutdowns and give operators more time to repair faults. 

What's the Problem with De-Rates?

Previously under the EPA emissions regulations, if DEF ran out or there was an unexpected mechanical failure, the vehicle would “de-rate,” or drastically reduce. In many cases, vehicles were limited to as little as 5 mph within hours of a DEF-related fault, according to the EPA.

EPA now is pursuing rulemaking opportunities to provide further relief. As it is working on its proposal for the reconsideration of the 2022 Heavy-Duty Engine and Vehicle NOx rule, it is considering whether derates may no longer be necessary for compliance.  

Ad Loading...

To that end, EPA is demanding information from major diesel engine manufacturers on critical data from DEF system failures. The data collected will allow EPA to independently evaluate ongoing system failures and help inform the next steps the agency takes in 2026 pertaining to DEF. 

Calling the problem “a massive issue,” EPAAdministrator Lee Zeldin said that on top of that “commonsense guidance” put out last August, “Today, we are furthering that work and demanding detailed data to hold manufacturers accountable for the continued system failures.”   

What Information Does EPA Want From Engine Makers?

Under Section 208(a) of the Clean Air Act, EPA is authorized to require manufacturers to provide information needed to assess whether emission control systems are functioning properly and whether manufacturers are meeting their obligations to identify and fix defects.

EPA is demanding information from the top 14 on-road and nonroad manufacturers that account for over 80% of all products used in DEF systems.


Specifically, EPA is requiring data on warranty claims, failure rates, and repair information for Model Years (MY) 2016, 2019, and 2023 emission control products to determine whether ongoing DEF system failures are related to a specific generation of products.

Ad Loading...

Manufacturers will have 30 days to provide the requested information; failure may result in additional inquiries or penalties.  

The agency said in a news release that it is “committed to working with manufacturers to ensure practical, durable solutions that simultaneously support emissions reductions and reliable operations.

“EPA has been meeting with manufacturers to receive updates on their progress in developing improved software in response to EPA’s guidance. The agency has consistently encouraged manufacturers to provide the relief as quickly as possible. “ 

Background

Since 2010, most on-road diesel trucks and many types of nonroad equipment (such as tractors and construction machinery) have used selective catalytic reduction systems that inject DEF into exhaust streams to reduce nitrogen oxide emissions. 

Under the Trump EPA’s August guidance, major changes were undertaken. Heavy-duty trucks now should only receive a warning light for 650 miles or 10 hours after a fault is detected. 

Ad Loading...

Following that time, the engine will only mildly derate, allowing trucks to operate normally and without speed limits for up to 4,200 miles or two work weeks. Only after about four work weeks does speed drop to 25 mph until repairs are made. 

In addition to EPA’s August 2025 guidance, EPA stated that starting with MY 2027, all new diesel on-road trucks must be engineered to avoid sudden and severe power loss after running out of DEF. 


More Equipment

Screenshot of MyGarage online tool with Mack trucks in the background
Equipment•by News/Media Release•November 18, 2026

Mack Makes Comparing Truck Configurations Easier

Mack's new MyGarage online tool lets customers explore different truck configurations on their own schedule, before visiting a dealer.

Read More →
Bendix iTABS X trailer antilock braking system module shown in the foreground, with a tractor-trailer traveling on a highway in the background.
Equipment•by News/Media Release•November 11, 2026

Bendix Upgrades Trailer ABS With Smarter Diagnostics

The new iTABS X system replaces Bendix's TABS-6 Standard trailer ABS, adding faster diagnostics and connectivity that could help fleets identify brake-system problems before they lead to downtime.

Read More →
Red Paper Transport truck fueling with renewable natural gas at a Clean Energy fueling facility
Fuel Smarts•by Deborah Lockridge•November 11, 2026

Paper Transport Puts RNG to Work for Shipper

Eight renewable natural gas trucks are hauling freight for Graphic Packaging, part of Paper Transport’s growing mix of alternative-fuel transportation options that also includes a Tesla Semi pilot.

Read More →
Ad Loading...
Fleet Management•by Staff•November 10, 2026

What Trucking Events are Happening in 2027?

Looking for trucking-related conventions, expos, and other events? Heavy Duty Trucking has developed this list of national and larger regional trucking shows and events.

Read More →
Illustration showing generic graphs and stylized trucking fleet
Equipment•November 9, 2026

EPA 2027 Uncertainty Slows Truck Orders

Improving freight rates may have many trucking fleets ready to buy new trucks, but they're struggling to figure out what those trucks will cost — or even when they'll be available.

Read More →
Western Star pulling double trailers in the Permian Basic for Atlas Energy Solutions
Fleet Management•by Deborah Lockridge•October 30, 2026

Kodiak Lines Up Fleets for Driverless Trucking

An agreement for 75 trucks, a new Texas freight lane, and progress on safety validation move Kodiak closer to its planned driverless highway launch.

Read More →
Ad Loading...
A GP Transco tractor-trailer crosses a bridge over a river, with trailer side skirts visible beneath the white trailer.
Fuel Smarts•by Deborah Lockridge•October 27, 2026

How GP Transco Builds Fuel Savings a Fraction at a Time

Aerodynamic specs, solar panels, and driver incentives help GP Transco turn small efficiency gains into savings it can reinvest in its people.

Read More →
YouTube thumbnail showing man being interviewed and backup camera and in-cab screen showing backup video
Safety & Compliance•by Deborah Lockridge•October 23, 2026

More Trailer Data Through the Same Seven-Way [Video]

Can trucking’s standard seven-way connector handle more cameras and trailer data? Grote’s Adam Slade shows HDT how the company is using new technology with its 4See trailer system, not only to add a new backup camera but also to expand other capabilities — without adding another connection.

Read More →
Rear view camera on back of a semi trailer
Equipment•by Deborah Lockridge•October 23, 2026

Grote: More Cameras, Same Seven-Way Connector

The next-generation 4See rear-view backup camera from Grote uses the standard seven-way connector and supports additional cameras and other trailer data.

Read More →
Ad Loading...
wide angle photo of trade show booth with big "Mack" sign above, red Mack truck in the foreground
Equipment•by Deborah Lockridge•October 20, 2026

Trucks at ATA's 2026 MC&E in Charlotte, North Carolina [Photos]

From rigs decked out in patriotic America's 250 paint schemes to autonomous trucks and more, check out these photos from ATA's 2026 Management Conference & Exhibition.

Read More →