They're back.
Those long lines of orange barrels, constricting rows of concrete walls, and diamond-shaped "Road Work Ahead" signs have popped up again all along the highways and byways we travel every day.
With their arrival comes increased traffic congestion and the temptation by some drivers to take unnecessary and unsafe chances behind the wheel.
"In a work zone, patience behind the wheel has to be Priority One," says Bill Graves, president of American Trucking Assns., the nation's largest trucking industry trade and safety group. "Sooner or later, the work zone will end. A split-second burst of aggressive driving in a cramped construction area just isn't worth the often-tragic consequences."
For safety's sake, and to help motorists, Graves' group polled its team of million-mile, accident-free truck drivers for their common sense advice on how to safely navigate work zones:
-- Double your usual following distance. Without it, you won't have time to safely react to warnings or hazards like debris or potholes that suddenly pop out from under the vehicle ahead.
-- Get into the correct lane well in advance.
-- Where traffic is merging into a single lane, be extremely cautious of cars racing to get ahead of slowing traffic. Truck drivers call these unsafe motorists "zippers," after the way they zip in and out of slowing traffic, endangering other motorists who are obeying the work zone signs.
-- Pay close attention to operating construction equipment while in a work zone. You never know their next move, so be ready to stop.
-- Remember, most work zone traffic lanes are narrow and don't have shoulders or emergency lanes due to the use of barrels and concrete barricades.
-- Where a temporary median crossover is used, drivers beware: Uneven or sloped road surfaces can dramatically affect handling and stability.
-- Drivers should report an absence of signs, or poor signage, to the appropriate highway department.
The professional truck drivers say "zippers" likely never think of how they are endangering themselves, their families or other motorists when they cut quickly in front of a large truck at a work zone merge site and then suddenly have to slow down. It is perhaps the most dangerous traffic offense they can commit. This type of behavior in a cramped construction site endangers not only truck and car drivers, but highway workers as well.
Driving Rigs Safely in a Construction Zone--Watch for 'Zippers'
They're back. Those long lines of orange barrels, constricting rows of concrete walls, and diamond-shaped "Road Work Ahead" signs have popped up again all along the highways and byways we travel every day. With their arrival comes increased traffic congestion and the temptation by some drivers to take unnecessary and unsafe chances behind the wheel.
More Safety & Compliance

Recall of Fontaine Fusion Flatbeds Warns Owners Not to Use the Trailers
Some Fontaine Fusion flatbed trailer manufactured between February 2025, and March 2026 could have mainbeams weakened by hydrogen embrittlement because of a problem in the galvanizing process.
Read More →
Deadline Extended for HDT Truck Fleet Innovators Nominations
Heavy Duty Trucking has extended the deadline for nominations for its Truck Fleet Innovators awards. The deadline has been extended to May 22.
Read More →
Supreme Court Ruling Puts Freight Broker Vetting Practices in Spotlight
The unanimous SCOTUS ruling in the closely watched Montgomery v. Caribe case allows state negligence claims against freight brokers that hire unsafe motor carriers, raising new liability and vetting concerns among brokers.
Read More →The Truck Safety Tech K&B Transportation Says Is Making a Difference [Watch]
Can technology help prevent truck crashes? In this HDT Talks Trucking Short Takes episode, K&B Transportation explains how it’s using cameras, speed management tools, cellphone-blocking technology, and other systems to improve safety and reduce risk across its fleet.
Read More →Listen: Inside Modern Fleet Safety: AI, Cameras & Speed Control at K&B Transportation
Fleet safety is evolving fast—and technology is at the center of it. Learn how a former commercial vehicle enforcement officer turned director of safety at K&B Transportation is embracing real-world safety technology.
Read More →
FMCSA’s Motus System Is Coming. What Fleets Need to Know Now
FMCSA's long-awaited registration system promises a single portal — and tighter fraud controls. And there are steps you need to take by May 14.
Read More →
Avoiding Winter Pileups: Don’t Become the Next Link in the Crash-Chain
Winter roadway “pileups” aren’t one crash — they’re a chain reaction. Here’s what triggers them, how truck drivers can spot the danger early, and what to do if you're suddenly trapped in the mess.
Read More →
Freightliner Expands Detroit Assurance with New Intersection and Turning Safety Tech
Detroit’s next-generation ABA6 safety system adds cross-traffic detection and enhanced side guard assist with left-turn protection, targeting high-risk urban scenarios.
Read More →
'Beyond Compliance,' Regulations, Driver Coaching on ATRI’s 2026 Research List
The American Transportation Research Institute will examine driver coaching, regulatory impacts — including the "Beyond Compliance" concept —and weather disruptions that shape trucking operations.
Read More →
FMCSA Revamps DataQs to Improve Fairness, Speed of Reviews
New requirements add firm deadlines and independent review steps, addressing long-standing complaints about inconsistent rulings and slow response times.
Read More →
