Related: Economic Growth Ahead at Trend Level, Says Economist
Class 8 Truck Orders Get Off to Slow Start in 2019
Truck orders got off to a slow start in 2019 with early reports from industry analysts ACT Research and FTR tracking a 26% decline in January compared to December 2018.

Truck orders got off to a slow start in 2019 with early reports from industry analysts ACT Research and FTR tracking a 26% decline in January compared to December 2018.
ACT Research’s preliminary numbers show only 15,800 orders in January, continuing the trend of declining monthly truck orders for the past few months. January truck orders were 68% lower than the same month in 2018 as well.
The reason for lower truck orders is logical: 2018 was a banner year for Class 8 truck orders and fleets were jockeying to put in orders that wouldn’t be fulfilled until mid-way through this year. With considerable backlogs as fleets wait for equipment to get built, the problem has little to do with supply and demand, according to ACT.
“We view this January’s order softness as having more to do with pulled-forward orders and a very large Class 8 backlog than with the current supply-demand balance,” said Kenny Vieth, ACT president and senior analyst. “Softening freight growth and strong Class 8 capacity additions suggest that the supply-demand balance will become a story in 2019, but January seems a premature start to that tale.”
Backlogs are expected to fall, but should remain over 70% higher than a year ago. Class 8 orders for the past 12 months have now totaled 402,000 units, according to FTR. Cancellations are expected to remain high and order rates are likely to remain suppressed for the first few months of the year.
Medium-duty Class 5-7 truck orders increased slightly in January, hitting 23,400 units. This is right around the 23,000-unit average for the past six months.
“This is more of a resting point than a turning point. There is an enormous amount of orders in the backlog. The key will be how many of these trucks get built and when,” said Don Ake, FTR vice president of commercial vehicles. “The fundamentals of the economy and freight growth remain solid, so there is no reason to panic.”
More Equipment
Behind the Wheel of the New Mack Anthem [Video]
HDT takes the new Mack Anthem around Mack’s Pennsylvania test track to see how its driver-focused design, technology, visibility and handling perform from behind the wheel.
Read More →
DTNA Plans New U.S. Truck Plant as Manufacturing Footprint Shifts
Daimler Truck North America is evaluating sites for a new assembly plant expected to open in 2029 while winding down operations at its longtime Portland manufacturing facility.
Read More →
Great Dane Flatbed Trailer Offers Light Weight and Strength
Freedom Ultra is designed for a wide range of open-deck applications, including building materials, lumber, machinery, steel products, industrial freight, and coil hauling.
Read More →
What It's Like Inside this Custom 2025 Peterbilt 589?
Take a driver's-eye tour of this customized 2025 Peterbilt 589 in this video, as longtime driver Ingrid Brown explains its features, compares it to previous models, and shares plenty of personality along the way.
Read More →Drivers Put Western Star Trucks to the Test at Star Nation Experience
Watch to get an inside look at the Western Star trucks, technology, and community behind the Star Nation Experience 2026!
Read More →
Atlas Expands Kodiak Driverless Truck Fleet in Permian Basin
Atlas Energy Solutions is expanding autonomous frac sand hauling in the Permian Basin with a second load-out location and plans for 100 driverless trucks by mid-2027.
Read More →
Putting Mack’s Command Steer to the Test
A test drive of Mack’s Command Steer active steering system evaluates how it can make truck driving easier and less tiring.
Read More →
Mack, Volvo Expand DEF Derate Software Updates
The updated software gives Mack and Volvo truck owners more time to address DEF-related issues before the engine derates or the vehicle goes into reduced-speed inducement, following new EPA guidance.
Read More →
Rush, MCT Team Up to Grow Refrigeration Service Network
The joint venture will operate MCT's network of Carrier Transicold dealerships and mobile service locations, with the companies promising greater service capacity and uptime for refrigerated fleets.
Read More →
Cummins Adjusts 2027 Engine Rollout After EPA Proposal
The engine maker will gradually introduce its new Model Year 2027 diesel engines while continuing to offer current models during the transition, citing the EPA's proposed emissions rule changes.
Read More →
