Heavy Duty Trucking Logo
MenuMENU
SearchSEARCH

FMCSA: No Word on When Trucking Will See Hours-of-Service Changes

A Federal Motor Carrier Safety Administration official points out that the agency's ongoing effort to revise the hours-of-service rule is still in the works, with the goal being "to provide some flexibility" to the key regulation affecting commercial truck drivers in the U.S.

Jim Beach
Jim BeachTechnology Contributing Editor
Read Jim's Posts
February 18, 2020
FMCSA: No Word on When Trucking Will See Hours-of-Service Changes

Mike Millian, president of Canada’s Private Motor Truck Council; Joe DeLorenzo, FMCSA Acting Associate Administrator for Enforcement; Terry Wirachowsky, director of CVSA’s roadside inspection program, and Mike Ahart, vice president of regulatory affairs for Omnitracs, share a laugh during a panel on current and future regulations during the Omnitracs Outlook 2020 user conference in Las Vegas.

Photo: Jim Beach

4 min to read


When asked what types of changes the industry might expect in hours-of-service rules, Joe DeLorenzo demurred. “All I can say is, I can’t get into where we are with time frame.” DeLorenzo, the Federal Motor Carrier Safety Administration’s acting associate administrator for enforcement, said the agency was working through the many comments it had received, which he described as “helpful.”

But he said as far as when such changes are actually put into place is unclear. “The way the rulemaking process works at this point, we plow through the comments and then make a determination of what changes there will be,” he explained. “The goal with this rule is to provide some flexibility. I think we are well on the way to doing that.” A panelist for a Feb. 17 session at the Omnitracs Outlook 2020 meeting in Las Vegas, DeLorenzo noted that he feels the process is moving rather quickly.

Ad Loading...

Mile Millian, president of the Private Motor Truck Council of Canada, said that from the Canadian perspective, flexibility was a key, within limits. Also participating on the panel was Terry Wirachowsky, director of the Commercial Vehicle Safety Alliance’s roadside inspection program. She said she thought changes to the mandatory 30-minute rest period would be helpful and provide some flexibility. As is, the rule is “problematic,” she said, and difficult to enforce at roadside.

DeLorenzo added that he thought “a rule that makes everybody a little unhappy is probably the best,” and compared developing HOS to threading a needle. “Our goal is to provide flexibility while maintaining safety. But the agency has to understand that traffic and infrastructure are much different than they were when the rule was first developed.”

As what the agency has seen since the ELD mandate, DeLorenzo said that when the rule went into effect, HOS daily and weekly limit violations went down. But after dipping at the same time, false log violations have ticked back up, primarily he thinks because roadside inspectors are learning what to watch for.

Ad Loading...

He said it would probably be another year before the roadside inspectors in each state are really up to speed with ELD reporting and what kinds of things to look for. “When it comes to data transfer, the best way is through the web service, DeLorenzo added. “Not sure why they did the email transfer the way they did it.”

In Canada, the ELD mandate doesn’t take effect for another 16 months, but unlike as there was in the U.S., there will no grandfathered period for truckers currently using automatic onboard recorder data recorders.

That’s not a bad thing, Wirachowsky said. The two-year grandfathering period in the U.S. created problems for roadside inspectors because often neither the inspector nor the driver was sure which type of device was in the truck. In addition, in Canada AOBDRs are not as widely used.

The panel also discussed the impact of the federal drug and alcohol clearinghouse rule and the impact of legalized marijuana on the industry in terms of driver retention and the driver shortage. DeLorenzo said that while states may legalize marijuana use, the FMCSA and the federal government as a whole still consider a positive test for marijuana to be a disqualification. In Canada, marijuana is legal throughout the country, but still prohibited for drivers. Millian noted that there is no mandatory drug testing in Canada, but that his association supports testing.

As for what might be on the regulatory horizon, DeLorenzo said, “You’ve seen over the last few years is that things are changing quickly, and I don’t think that will change.” And the speed of technological change will also have an impact of future rulemaking. He added that he didn’t think the agency had “come to grips” with distracted driving, but that could change as a new transportation authorization bill makes its way through congress. “That’s when many changes come about,” he said, with the authorization bills often including congressional mandates for FMCSA to create rules to address certain issues.

Ad Loading...

As Wirachowsky noted, the industry itself often comes up with technologies that eventually find their way into the rule books. She cited AOBDRs as an example, with many fleets deploying those technologies well before rules were created around them. “It’s easier for governments to make rules when 60% to 70% of the industry is already doing it,” she said.

More Safety & Compliance

Winter pileup accidents.
Disaster Responseby Jack RobertsApril 30, 2026

Avoiding Winter Pileups: Don’t Become the Next Link in the Crash-Chain

Winter roadway “pileups” aren’t one crash — they’re a chain reaction. Here’s what triggers them, how truck drivers can spot the danger early, and what to do if you're suddenly trapped in the mess.

Read More →
Mobile tablet showing Motus screen against highway background with Motus logo

FMCSA’s Motus System Is Coming. What Fleets Need to Know Now

The long-awaited registration system promises a single portal — and tighter fraud controls.

Read More →
Graphic with light bulbs, HDT Truck Fleet Innovators logo, and the word Nominations
Fleet ManagementApril 24, 2026

Nominations Open for HDT Truck Fleet Innovators 2026

Heavy Duty Trucking is searching for forward-looking leaders at trucking fleets as nominations for HDT’s Truck Fleet Innovators 2026. Deadline is May 15.

Read More →
Ad Loading...
Detroit ABA6 safety system.

Freightliner Expands Detroit Assurance with New Intersection and Turning Safety Tech

Detroit’s next-generation ABA6 safety system adds cross-traffic detection and enhanced side guard assist with left-turn protection, targeting high-risk urban scenarios.

Read More →
Illustration with ATRI logo and square blocks spelling out "research"
Fleet Managementby Deborah LockridgeApril 20, 2026

'Beyond Compliance,' Regulations, Driver Coaching on ATRI’s 2026 Research List

The American Transportation Research Institute will examine driver coaching, regulatory impacts — including the "Beyond Compliance" concept —and weather disruptions that shape trucking operations.

Read More →
Illustration of colorful map of United States with DataQs website screen superimposed

FMCSA Revamps DataQs to Improve Fairness, Speed of Reviews

New requirements add firm deadlines and independent review steps, addressing long-standing complaints about inconsistent rulings and slow response times.

Read More →
Ad Loading...
Illustration of driver medical exam paperwork over duotone background of a blood pressure check

FMCSA Extends Paper Medical Card Exemption … Again

Five states still aren't ready to accept commercial driver medical exam information directly from the medical examiner's registry.

Read More →
Collage of Top 20 Product award ceremonies
EquipmentMarch 31, 2026

HDT Honors the Best New Products of 2025 at TMC [Photos]

Heavy Duty Trucking's Top 20 Products awards recognize the best new products and technologies. Check out the award presentations at the 2026 Technology & Maintenance Council annual meeting.

Read More →
freightliner whitepaper
SponsoredMarch 31, 2026

Detroit Engines: Trusted Performance, Built for What's Next

The Detroit® Gen 6 engine platform proves that real progress doesn’t require a complete redesign. Built on 20 years of trusted technology, these engines are designed for efficiency, stronger performance, and greater reliability than before. And they do it all while complying with 2027 EPA standards on every mile.

Read More →
Ad Loading...
Aperia HALO front steer axle.
Safety & Complianceby Jack RobertsMarch 18, 2026

Aperia Expands Halo Platform with Steer-Tire Inflation System, Fifth-Wheel Integration

Aperia Technologies introduced a new automatic tire inflation system for steer axles and a partnership with Fontaine Fifth Wheel to integrate coupling status into its Halo Connect platform.

Read More →