Class 8 Orders Drop Due to Supply Chain Uncertainly
The low order total in November is not due to any lack of demand, but rather due to the uncertainty in the supply chain.

November orders, down 41% from October and down 82% year-over-year, was the lowest for the month of November since 1995.
Source: FTR
North American Class 8 net orders dropped in November to between 9,500 and 9,800 units, FTR and ACT Research reported, respectively.
The drop, down about 41% from October and down 82% year-over-year, was the lowest for the month of November since 1995.
The low order total in November is not due to any lack of demand for new equipment (which is very high), but rather due to the uncertainty in the supply chain, FTR officials explained in a press release.
“OEMs remain very reluctant to increase total backlogs with so much uncertainty about the supply chain,” FTR officials said. “Component deliveries, especially semiconductors, have been unreliable since March. OEMs booked a huge number of orders a year ago, expecting to be able to build at full capacity throughout 2021, but parts and components shortages prevented them from completing many of these trucks.
Don Ake, vice president of commercial vehicles for FTR, predicts that once the OEMs are confident they can obtain the necessary production inputs, they will boost production and enter more orders.
“Backlogs remain at sturdy levels, but OEMs don’t want them much higher until they know their manufacturing capacity,” Ake said.
“Demand for new trucks is at record levels,” he added. “There is tremendous pent-up demand generated in 2020 and 2021. Spot rates are at record levels, and contract rates are rising. Prices for used trucks are also at record highs. And when the manufacturing sector of the economy gets past the supply chain crisis, there will be even more freight to haul.”
Kenny Vieth, ACT’s president and senior analyst, said: “Importantly, we reiterate, with critical economic and industry demand drivers at, or near, record levels, industry strength is exhibited in long backlog lead times, rather than seasonally weak orders. Looking to October data, the last full month of data in hand, the Class 8 backlog was nearly 281,000 units and at October’s build rate, the backlog-to-build ratio was 14.6 months, illustrating demand versus supply-side challenges.”
Class 8 orders now total 393,000 units for the previous 12 months, according to FTR.
More Equipment
Drivers Put Western Star Trucks to the Test at Star Nation Experience
Watch to get an inside look at the Western Star trucks, technology, and community behind the Star Nation Experience 2026!
Read More →
Atlas Expands Kodiak Driverless Truck Fleet in Permian Basin
Atlas Energy Solutions is expanding autonomous frac sand hauling in the Permian Basin with a second load-out location and plans for 100 driverless trucks by mid-2027.
Read More →
Putting Mack’s Command Steer to the Test
A test drive of Mack’s Command Steer active steering system evaluates how it can make truck driving easier and less tiring.
Read More →
Mack, Volvo Expand DEF Derate Software Updates
The updated software gives Mack and Volvo truck owners more time to address DEF-related issues before the engine derates or the vehicle goes into reduced-speed inducement, following new EPA guidance.
Read More →
Rush, MCT Team Up to Grow Refrigeration Service Network
The joint venture will operate MCT's network of Carrier Transicold dealerships and mobile service locations, with the companies promising greater service capacity and uptime for refrigerated fleets.
Read More →
Cummins Adjusts 2027 Engine Rollout After EPA Proposal
The engine maker will gradually introduce its new Model Year 2027 diesel engines while continuing to offer current models during the transition, citing the EPA's proposed emissions rule changes.
Read More →
Aurora Rolls Out Next Generation of Driverless Trucks for Commercial Freight
Aurora's latest autonomous trucks it's rolling out with International feature lower-cost hardware designed for a million miles as the company expands commercial driverless freight operations across the U.S. Sun Belt.
Read More →
Peterbilt 589 Spotlight: A Close Look at a Custom Working Truck [Video]
There's more to this customized Peterbilt Model 589 and Great Dane refrigerated trailer than chrome and stainless (although there's plenty of that too!) A veteran driver explains the design choices and practical features behind this working truck.
Read More →
Continental Expands Retread Lineup With New ContiTread HDL 5 EP
New long-haul drive retread is designed to improve fuel efficiency, extend tread life, and lower fleets' cost per mile.
Read More →
EPA Proposal Could Ease 2027 Truck Costs and Buying Uncertainty
The proposal doesn't change the tougher NOx standard, but it would revise key implementation requirements that manufacturers say have driven up costs and complicated fleet purchasing decisions.
Read More →
