Heavy Duty Trucking Logo
MenuMENU
SearchSEARCH

Test Drive: Ford's New F-650 Looks, Feels Familiar

If you found Ford’s previous F-650 and F-750 useful, comfortable and easy to drive, you’ll feel the same way about the new generation.

Tom Berg
Tom BergFormer Senior Contributing Editor
Read Tom's Posts
May 20, 2016
Test Drive: Ford's New F-650 Looks, Feels Familiar

The front-end styling is fresh, but Supe rDuty steel cabs, including this five-man crew type, carry over from previous model. The tight front-wheel cut makes the truck highly maneuverable. Photos: Tom Berg

4 min to read


The front-end styling is fresh, but Supe rDuty steel cabs, including this five-man crew type, carry over from previous model. The tight front-wheel cut makes the truck highly maneuverable. Photos: Tom Berg

If you found Ford’s previous F-650 and F-750 useful, comfortable and easy to drive, you’ll feel the same way about the new generation.

Ad Loading...

The new series of medium-duty trucks looks and drives a lot like the older ones, even if the 2016s sit on new frames and are assembled in the U.S. instead of Mexico. The production change was the result of the expiration of the Blue Diamond deal with Navistar, which had assembled the midrange F-series using Ford cabs and many other components on Navistar-designed frames.

Ad Loading...

I can make comparisons because two years ago, Ford sent me a bright-white F-650 dump with the Triton V-10 engine outfitted to burn compressed natural gas. In the following week I found that, except for the large cabinet that housed the CNG cylinders, it ran like a gasoline-engine truck. My only concern was where to refuel it (I went online and quickly found a filling station).

Two months ago, from Ford headquarters in Dearborn, Mich., came a bright-orange F-650 dump, also with the Triton V-10. It burned gasoline and ran like that CNG-powered engine, but it didn’t have the tank cabinet and the other expensive equipment needed for CNG. There’s a lot to be said for traditional gasoline and diesel fuel. They contain a lot of energy for a comparatively small amount of storage space, and they’re available almost everywhere. A gasoline-powered V-10 F-650 lists at about $15,000 less than one with Ford’s Power Stroke V-8 diesel. (The Cummins ISB6.7 diesel and Allison automatic have been dropped.)

The new-series F-650/750 features fresh styling with attractive creases in its hood and a sleeker look to its grille. Headlamps are projector-beam halogens that light the way quite well. The hood-and-fender assembly opens fairly easily, revealing the shrouded engine and all the plumbing and wiring associated with it. (This kind of tilting hood would be a nice feature on lighter-weight F-series trucks that have top-opening alligator hoods, but they sell very well as they are.)

Cabs and interiors are carried over from the previous midrange models, and from behind the wheel things look similar. The gauges, controls and overall dash design were very much like those from the older series. That’s mostly a good thing, though for HVAC operation I’d have preferred three rotary knobs instead of the consumer-style push buttons Ford uses. They’re there because Ford’s medium-duty trucks borrow their cabs from the mass-market Super Duty pickups. This affords economies of scale that are reflected in pricing.

Front seats are comfortable and supportive cloth-covered buckets; the driver’s is air-ride via electric pump. Instruments and switches are also from the previous generation.

The midrange trucks can be had with three cab styles — 2-door Regular, and 4-door Super and Crew. This truck had the Crew Cab. With the orange paint, it almost shouted, “I’m a municipal truck!” Except you won’t find many muni vehicles with a chromed nose, or the XLT cloth-trimmed seats and plastic paneling over walls and doors inside. Front seats were buckets contoured for good support, while the rear seat was more bench-like. There was decent head and legroom front and rear, and power windows and door locks. So whoever ends up owning this truck will send out a crew in comfort and modest style.

Ad Loading...

The driving experience is much like the older series: an easy climb up, good visibility all around, and good ride. Springs are said to be longer, so the ride may be smoother, though I couldn’t say unless I had driven the two trucks in quick succession instead of two years apart. A very tight front-wheel cut made up for the longish wheelbase, and maneuverability was outstanding. Several times I was surprised and pleased at how easily I could jockey the truck through a right-angle turn in my driveway. 

The engine’s behavior was somewhat more leisurely, operating several hundred rpm lower than the previous truck’s. Instead of regularly spinning to 3,300 and 3,500 rpm, this one upshifted at about 3,000 unless I put my foot into it, which I seldom did. The engine’s cruising speed was also a bit slower at given road speeds. The big V-10 ran well through the smooth TorqShift 6-speed automatic transmission, which is the only one you can get from Ford. Manual transmissions haven’t been available for years because there’s no call from them, product planners say.

A friend needed some gravel for his driveway, and I gladly obliged. We picked up 2 tons at a quarry, and the chassis settled down a bit and the ride was smoother than when empty. We drove a few miles to his house and I delivered the gravel where he wanted it, in a pile up near the house.

Friend Craig Scott operates push-button controls to finish depositing 2 tons of gravel on his driveway. The electric-over-hydraulic hoist could also tip the body to spread the load.

From a driver’s perspective, the new Ford mediums are very familiar vehicles. Specifications say the Ford-designed frame on my 2016 test truck is 50% stiffer than the one I had two years ago, which should make it tougher and longer-lived, especially if it goes off-road onto rough terrain where twisting occurs. Production at Avon Lake, Ohio, instead of Sautillo, Mexico, is a boon to about 1,000 workers who were added to produce the midrange trucks as well as lighter-duty Super Duty cab-chassis models. I’d call that a win-win.

Tom Berg holds a commercial driver’s license and does Test Drives of all classes of trucks. He also writes about vocational and medium-duty trucks, trailers and bodies, maintenance, and alternative fuels.

Subscribe to Our Newsletter

More Equipment

Photo of back of aluminum flatbed trailer on show floor
Equipmentby Deborah LockridgeApril 2, 2026

Fontaine Expands Flatbed Lineup with New Fleet-Focused Models, Eyes 2027 Launch

Fontaine is broadening its flatbed lineup with new models aimed at fleets, including a lightweight aluminum trailer expected in 2027 that emphasizes durability, repairability, and lower cost.

Read More →
YouTube thumbnail with Fontaine Force flatbed trailer
Equipmentby Deborah LockridgeApril 2, 2026

Fontaine's Fleet-Focused Force Flatbed Prototype [Watch]

A new prototype from Fontaine Trailer focuses on what fleets say they need most: easier repairs, lower maintenance costs, and practical, service-friendly design.

Read More →
Illustration of day cab tractor-trailer crossing bridge
EquipmentApril 1, 2026

From Long Haul to Short Loops: The New Math Behind Day Cabs

As warehouse networks expand, predictable regional routes are replacing long-haul runs—reshaping how fleets spec, operate, and resell day cabs.

Read More →
Ad Loading...
Factory illustration building with Hyundai on the side
Equipmentby Deborah LockridgeMarch 31, 2026

Hyundai Translead Bringing Trailer Production to U.S.

The new Hyundai Translead production sites will improve trailer and body delivery to customers by reducing lead times and leveraging a growing dealer network.

Read More →
Collage of Top 20 Product award ceremonies
EquipmentMarch 31, 2026

HDT Honors the Best New Products of 2025 at TMC [Photos]

Heavy Duty Trucking's Top 20 Products awards recognize the best new products and technologies. Check out the award presentations at the 2026 Technology & Maintenance Council annual meeting.

Read More →
freightliner whitepaper
SponsoredMarch 31, 2026

Detroit Engines: Trusted Performance, Built for What's Next

The Detroit® Gen 6 engine platform proves that real progress doesn’t require a complete redesign. Built on 20 years of trusted technology, these engines are designed for efficiency, stronger performance, and greater reliability than before. And they do it all while complying with 2027 EPA standards on every mile.

Read More →
Ad Loading...
White semi trailer at TMC booth display
Equipmentby News/Media ReleaseMarch 30, 2026

Hyundai Translead Expands Trailer Tech, Introduces Long-Life Dry Van, New Refrigerated Body

Smart safety systems, AI-powered visibility, a 10-year-warranty dry van, and a modular refrigerated body debuted at TMC.

Read More →
Illustration showing diesel exhaust fluid pump sign and EPA headquarters
Equipmentby Deborah LockridgeMarch 30, 2026

EPA Targets DEF Sensor Failures Behind Truck Derates

New guidance allows engine makers to replace problematic DEF sensors with NOx-based systems, aiming to reduce unnecessary derates and downtime caused by failures in the sensors designed to monitor diesel exhaust fluid on trucks.

Read More →
Circles with trucks demonstrating sustainable features and Top Green Fleets logo
Fuel Smartsby Deborah LockridgeMarch 27, 2026

Heavy Duty Trucking is Searching for the Top Green Fleets of 2026

Is your company a leader in sustainability efforts among trucking fleets? If so, Heavy Duty Trucking's editors want to hear from you.

Read More →
Ad Loading...
Truck-Lite backup camera system.
Equipmentby Jack RobertsMarch 27, 2026

Clarience Technologies Expands Safety and Visibility Portfolio at TMC

From advanced connectivity to AI-powered cameras and next-gen fuel filtration, Clarience companies outlined a roadmap for safer, more connected trailers at TMC’s Annual Meeting.

Read More →