Trailer Orders Fall, Production Levels Remain High
Trailer orders in March fell to the lowest level since late 2016, according to reports from analysts at FTR and ACT Research – but demand's still high.

Trailer orders are down as muhc as 50% year-over-year but production levels are high.
Photo via Stoughton
Trailer orders in March fell to the lowest level since late 2016, according to reports from analysts at FTR and ACT Research.
Much like the truck market, trailer orders have tailed off in recent months. Last month’s orders fell by 35%, according to ACT Research, and are down as much as 50% year-over-year. FTR’s preliminary report shows that only 13,500 units were ordered in the month. Dry van orders were particularly low and vocational trailer orders are continuing to drop, according to FTR.
One of the issues is that after a frenzy of equipment ordering last year, OEMs are booked up through much of this year. With uncertainty surrounding materials and component pricing in 2020, trailer makers are reportedly unwilling to open up more build slots.
“It appears that the industry entered a bit of a holding pattern in March, as order volume declined significantly from both the previous month and this time last year,” said Frank Maly, ACT Research’s director of commercial vehicle transportation analysis and research, in a release. “Although current backlogs consume the majority of available build slots this year, particularly in the dry van and reefer segments, we continue to hear that OEMs are reluctant to fully open the 2020 order boards.”
With fewer orders, however, backlogs should begin to creep downward from record levels, and demand for new trailers still appears to be high.
“Backlogs had fallen little so far in 2019, and are at unreasonable levels,” said Don Ake, FTR vice president of commercial vehicles. “Fleets still need more trailers, based on the robust production, so demand has not changed in the short run. The weak orders are totally the result of the lack of available production openings. However, cancellations will continue to be a factor due to a large, fluid, backlog.”
More Equipment

Atlas Expands Kodiak Driverless Truck Fleet in Permian Basin
Atlas Energy Solutions is expanding autonomous frac sand hauling in the Permian Basin with a second load-out location and plans for 100 driverless trucks by mid-2027.
Read More →
Putting Mack’s Command Steer to the Test
A test drive of Mack’s Command Steer active steering system evaluates how it can make truck driving easier and less tiring.
Read More →
Mack, Volvo Expand DEF Derate Software Updates
The updated software gives Mack and Volvo truck owners more time to address DEF-related issues before the engine derates or the vehicle goes into reduced-speed inducement, following new EPA guidance.
Read More →
Rush, MCT Team Up to Grow Refrigeration Service Network
The joint venture will operate MCT's network of Carrier Transicold dealerships and mobile service locations, with the companies promising greater service capacity and uptime for refrigerated fleets.
Read More →
Cummins Adjusts 2027 Engine Rollout After EPA Proposal
The engine maker will gradually introduce its new Model Year 2027 diesel engines while continuing to offer current models during the transition, citing the EPA's proposed emissions rule changes.
Read More →
Aurora Rolls Out Next Generation of Driverless Trucks for Commercial Freight
Aurora's latest autonomous trucks it's rolling out with International feature lower-cost hardware designed for a million miles as the company expands commercial driverless freight operations across the U.S. Sun Belt.
Read More →
Peterbilt 589 Spotlight: A Close Look at a Custom Working Truck [Video]
There's more to this customized Peterbilt Model 589 and Great Dane refrigerated trailer than chrome and stainless (although there's plenty of that too!) A veteran driver explains the design choices and practical features behind this working truck.
Read More →
Continental Expands Retread Lineup With New ContiTread HDL 5 EP
New long-haul drive retread is designed to improve fuel efficiency, extend tread life, and lower fleets' cost per mile.
Read More →
EPA Proposal Could Ease 2027 Truck Costs and Buying Uncertainty
The proposal doesn't change the tougher NOx standard, but it would revise key implementation requirements that manufacturers say have driven up costs and complicated fleet purchasing decisions.
Read More →
Cummins, Paccar Ease DEF Derates After EPA Guidance
Updated diesel engine software gives truck operators more time to address emissions-system issues while staying compliant with EPA emissions standards.
Read More →
