Heavy Duty Trucking Logo
MenuMENU
SearchSEARCH

FHWA Takes Next Step in Truck Size-Weight Limit Study

The Federal Highway Administration chose a Massachusetts engineering firm, CDM Smith and Associates, to help prepare its comprehensive study of truck size and weight limits. The $2.3 million contract is the next step in the agency’s effort to finish the study by November 2014, as required by last year’s highway law.

Oliver Patton
Oliver PattonFormer Washington Editor
April 5, 2013
2 min to read


The Federal Highway Administration chose a Massachusetts engineering firm, CDM Smith and Associates, to help prepare its comprehensive study of truck size and weight limits.

The $2.3 million contract is the next step in the agency’s effort to finish the study by November 2014, as required by last year’s highway law.

Ad Loading...

The study will look at the safety and economic implications of changing the federal limits, including permitting six-axle, 97,000-pound combinations.

It will compare trucks operating at current size and weight limits to bigger and heavier trucks on the basis of crash rates and other safety risk factors, as well as the costs of effective enforcement, and the impact of the equipment on pavements and bridges. It also will look into the impact on truck-rail competition.

The agency said the study will be peer-reviewed before it is completed next fall, and that the public will have an opportunity to comment.

Ad Loading...

“This effort will ensure that DOT produces a report that is objective, data-driven, inclusive, and comprehensive,” the agency said in a statement.

The study is a compromise that arose from the highway law, MAP 21, that Congress passed last summer.

Trucking and shipping interests were pressing for a provision that would have given states the authority to permit the six-axle, 97,000 vehicles on Interstates. But they could not overcome opposition from safety advocacy groups and railroads, and had to settle for the study.

The issue will be front-and-center in the next highway bill, which is due about the same time the study is supposed to be done.

Rep. Michael Michaud, D-Maine, has said the study will give Congress the information it needs to vote on a size and weight provision in that bill.

More Drivers

Illustration of truck owner operator and magnifying glass with the word "regulations"
Drivers•by Deborah Lockridge•November 19, 2026

New Independent Contractor Rule Gives Trucking More Clarity

The Labor Department is once again changing how it determines who's an independent contractor. This time, the rule includes specific examples addressing trucking safety requirements, CDLs, and lease-purchase agreements.

A truck driver in his cap, rubbing his eyes in exhaustion.
Sponsored•November 18, 2026

Catching Driver Fatigue is One Thing. What You Do Next Matters Just as Much

Fleets are getting better at detecting driver drowsiness. Few have figured out what should happen next, and that gap is where the real risk still lives.

Illustration with background of driver using ELD, with DOT logo and photo of FMCSA official in truck with driver
Safety & Compliance•by Deborah Lockridge•November 13, 2026

133 ELDs Revoked as ATA Pushes Certification Reform

FMCSA just removed a record number of electronic logging devices from its registry. ATA says it's time to rethink how ELDs get approved in the first place.

Ad Loading...
 Commercial vehicle inspector looking closely at truck engine
Safety & Compliance•by Staff•November 11, 2026

CVSA Sets 2027 International Roadcheck Dates

The annual 72-hour truck inspection blitz will take place May 11–13 across North America. Here's what fleets can expect and what inspectors found during the 2026 event.

Photo illustration combining laboratory sample tubes, marijuana, pills, white powder, and a syringe above a highway with tractor-trailers.
Safety & Compliance•by Deborah Lockridge•November 2, 2026

FDA Eases Path for Oral-Fluid Testing

Federal actions could advance oral-fluid drug testing for truck drivers, but lab certification delays and marijuana rescheduling questions remain.

Truck driver in a blue-tinted cab beside a hand holding cash, with the headline “Competing for Drivers.”
Drivers•by Deborah Lockridge•October 29, 2026

Why Hiring Truck Drivers Is Getting Harder

Higher recruiting costs, a shrinking driver pool, and renewed pay competition are raising the stakes for fleets heading into 2027.

Ad Loading...
Two red heavy-duty Class 8 trucks with Roehl branding
Drivers•by News/Media Release•October 27, 2026

Roehl Offers Truck Drivers $10,000 Retention Incentive

Payments begin after the first load and continue in mileage-based installments for eligible experienced drivers joining the fleet.

PS Coach tablet interface showing a driver’s coaching inbox, safety event video and coaching advice for a harsh-braking event.
Fleet Management•by News/Media Release•October 21, 2026

Platform Science Adds Dispatch and Safety Tools

Four additions to PS Fleet help fleets monitor loads, manage driver coaching, share truck locations and adjust video system settings.

Man with police badge on his arm by an open commercial truck door examining paperwork
Safety & Compliance•October 15, 2026

When Language Stops the Truck: The Return of ELP Out-of-Service Orders

English language proficiency rules for commercial drivers aren’t new, but renewed out-of-service enforcement has raised the stakes. Here’s what carriers need to know before a driver reaches a roadside inspection.

Ad Loading...
Illustration of silver robot waving his hand and a Samsara AI prompt on screen to call drivers
Fleet Management•by Staff•October 13, 2026

Samsara Launches Custom AI Agent Builder

Agent Studio lets fleets create AI tools for hours-of-service monitoring, reporting and driver support, including agents that communicate by phone.