The U.S. Environmental Protection Agency plans to award approximately $3.4 million in grants to establish projects using emerging technologies to reduce emissions from the nation's existing fleet of diesel engines.
This sum was authorized by the Energy Policy Act of 2005 and funded for the first time this fiscal year.
An emerging technology is a device or strategy that reduces emissions from diesel engines or equipment that has not been verified or certified by EPA or the California Air Resources Board. To qualify as an emerging technology, manufacturers must submit an application and test plan to EPA or ARB. Each technology will be reviewed on a case-by-case basis to determine if it qualifies as an emerging technology.
Qualified emerging technologies will be added to the Emerging Technologies List. The first three qualifying technologies are: 1) Caterpillars' Marine Emissions Upgrade Group (EUG), the 3500 Marine EUG; 2) Johnson Matthey's urea-based selective catalytic reduction (SCR) system for on-highway applications, the SCRT-1000; 3) and Nett Technologies' urea-based SCR for nonroad applications, the BlueMAX. Specifics of each technology including the emission reductions and engine applications can be found on the Emerging Technology List.
Addressing the existing fleet is important, says the EPA, because it pre-dates EPA's stringent new particulate and nitrogen oxide standards, and diesels remain in use for decades.
State, local, regional and tribal governments may apply for the grants, as well as non-profits and institutions with transportation, educational service, and air quality responsibilities. Emerging technology manufacturers must partner with an eligible applicant to receive this funding. The grants are targeting school or transit buses, medium and heavy-duty trucks, marine engines, locomotives and non-road engines. Grant proposals must be submitted by Sept. 21, 2008. The final awards will be announced in December.
The grants will be administered by EPA's National Clean Diesel Campaign under the Emerging Technology Program (ETP). ETP supports the development and commercialization of new, cutting-edge technologies. The program gives manufacturers the opportunity to capture real world data and gain valuable operating experience on their technology while it is used by fleet partners.
For more information about this grant, visit: http://www.epa.gov/otaq/diesel/grantfund.htm
For more information about the Emerging Technology Program, visit: http://www.epa.gov/otaq/diesel/prgemerg.htm
View the qualifying emerging technologies list at: http://www.epa.gov/otaq/diesel/prgemerglist.htm
Clean Diesel Emerging Technology Grant Funding Now Available
The U.S. Environmental Protection Agency plans to award approximately $3.4 million in grants to establish projects using emerging technologies to reduce emissions from the nation's existing fleet of diesel engines
More Aftermarket

Phillips Opens High-Tech Distribution Center for Faster Parts Delivery
Phillips Industries’ new Cincinnati-area distribution center is now shipping aftermarket trucking parts nationwide, aiming to speed up delivery times for customers.
Read More →
Volvo to Sponsor America’s Road Team for 2025
Volvo Trucks announced that it is extending its exclusive sponsorship of America’s Road Team for 2025.
Read More →
Webb to Start Taking Orders for UltraSet Pre-Adjusted Wheel Hubs
Webb, which recently acquired the Stemco Trifecta pre-adjusted hub program, will soon start taking orders for its replacement pre-assembled hub, the UltraSet.
Read More →
All-Makes Automatic Brake Adjusters, Ride Height Control Valves from Midland
SAF-Holland has added automatic brake adjusters and ride height control valves to its Midland All-Makes Program.
Read More →
ZF Aftermarket Expands [pro]Academy Training
ZF Aftermarket said it is expanding its ZF [pro]Academy training and will be adding 40 new modules this year.
Read More →
Eaton Adds Remanufactured Advantage Line of Clutches
Eaton has added its Advantage clutches to its remanufactured product line. The clutches feature a unique strap drive intermediate plate designed to allow customers to choose the latest OE specification
Read More →
ConMet Acquires TruckLabs, the Creator of TruckWings
Commercial truck and trailer parts provider ConMet acquired TruckLabs, the company that created TruckWings, an aerodynamic device that attaches to truck cabs and deploys to close the gap between truck and trailer. TruckLabs now operates as a subsidiary of ConMet.
Read More →
Diesel Laptops Releases Fault-Code-to-Part-Number Tool
Diesel Laptops said its Truck Fault Codes allows users to input a fault code and immediately identify and order the parts needed to complete repair work.
Read More →
Heavy Duty Parts and Labor Costs Dropped in Q2
A benchmarking report from TMC and Decisiv reveals good news for fleets as heavy-duty parts and labor costs dropped in the second quarter of 2023.
Read More →
Platform Science, Uptake Partner on Predictive Maintenance Platform
Platform Science and Uptake have formed a partnership aimed at bringing a comprehensive predictive maintenance program to market for U.S. truck fleets.
Read More →
