Heavy Duty Trucking Logo
MenuMENU
SearchSEARCH

Why Distributors Might Want to Look into an Employee Ownership Plan

Employee stock ownership plans, known as ESOPs, are gaining in popularity. There even was federal legislation introduced earlier this year to expand their use

by Staff
October 26, 2011
4 min to read


Employee stock ownership plans, known as ESOPs, are gaining in popularity. There even was federal legislation introduced earlier this year to expand their use.


An ESOP transfers some or all of company ownership to its employees. Typically, the company makes tax-deductible contributions to a trust set up to facilitate the plan. The trust then uses that money to buy stock from the current owners.

It takes time and money to set up, but has tax benefits, retirement benefits for the original owners and for the new employee-owners, and can provide a succession strategy.

Midwest Wheel Companies, Des Moines, Iowa, and Inland Truck Parts, Kansas City, Mo., are two major independent heavy-duty aftermarket distributors that have gone this route. Inland Chief Financial Officer Greg Klein is even chairman of the Employee-Owned S Corporations of America association.

Klein, writing in an op-ed piece on The Hill website earlier this year, noted that studies have shown that S-Corp ESOP employees have retirement account balances three to five times higher than the average 401(k) or defined contribution plan.

We spoke to Klein about Inland Truck Parts' experience and about ESOPs in general.

HDAJ: How did Inland Truck Parts become an ESOP?

Klein: Inland has been around since the mid-1940s. By 1982, the four original owners were retirement age and wanted to start getting out of the company. Like many in this industry, they had employees who helped them build the business. They really felt like rather than bring in new ownership or selling it to some third party that didn't understand the culture, they would sell it to the employees. So we started a profit sharing plan, and that used the contributions the company was making to buy the stock of the departing shareholders.

Eventually the employees owned more than 50% of the stock, so in 1992 it was converted to an employee stock ownership plan, an ESOP, which is the more commonly referred to language these days. By around 1995, we owned the entire company.

HDAJ: How does it work?

Klein: The ESOP is a retirement plan. You can't have all the employees run the business, so there's a trustee or trustees, which can be internal or external, and those trustees act like typical shareholders would and elect a board of directors, and from that point it acts as any normal company would. The unusual part is the ESOP with its trustees that are watching out for the employee owners' interests.

HDAJ: What should distributors keep in mind?

Klein: A lot of times the bank won't finance the whole thing, so the seller has to carry part or all of the note. So, you have to ask yourself, am I willing to finance any part of this deal to make this happen? Especially if you want to sell it all at one time. Otherwise you can sell portions of it over time. And the more debt you put in the company, you risk whether the company's going to be able to pay that off.

Sometimes there's private equity that will pay more than the business should be sold at. So the owner sometimes has to be willing to demand not the highest price out there, but demand a fair price. I think the most successful ESOPs out there, the owners weren't as concerned about getting the highest price possible as they were about their employees.

HDAJ: What's involved?

Klein: Beyond that, it's all technical. You just bring in the smart professionals and they make sure you cross your T's and dot your I's to follow the rules.

HDAJ: Why is an ESOP good for heavy-duty aftermarket distributors?

Klein: It's the perfect setup for a stable business, a stable industry, like ours. As you can imagine, in a volatile business, it's harder for the employees to handle stock fluctuations.

You grow the business, you know all the employees - a lot of times it's run very much like a family - and people are very worried about what happens to their employees after they sell the business and they're gone.

We have a motto here: We act like we own the place, because we do.

From the October/November 2011 issue of HDAJ.

Subscribe to Our Newsletter

More Aftermarket

Volvo VNL tractor-trailer.
Aftermarketby News/Media ReleaseOctober 21, 2024

Volvo to Sponsor America’s Road Team for 2025

Volvo Trucks announced that it is extending its exclusive sponsorship of America’s Road Team for 2025.

Read More →
Aftermarketby StaffApril 4, 2024

Webb to Start Taking Orders for UltraSet Pre-Adjusted Wheel Hubs

Webb, which recently acquired the Stemco Trifecta pre-adjusted hub program, will soon start taking orders for its replacement pre-assembled hub, the UltraSet.

Read More →
Maintenanceby News/Media ReleaseMarch 4, 2024

All-Makes Automatic Brake Adjusters, Ride Height Control Valves from Midland

SAF-Holland has added automatic brake adjusters and ride height control valves to its Midland All-Makes Program.

Read More →
Ad Loading...
Aftermarketby News/Media ReleaseJanuary 25, 2024

ZF Aftermarket Expands [pro]Academy Training

ZF Aftermarket said it is expanding its ZF [pro]Academy training and will be adding 40 new modules this year.

Read More →
Aftermarketby News/Media ReleaseJanuary 19, 2024

Eaton Adds Remanufactured Advantage Line of Clutches

Eaton has added its Advantage clutches to its remanufactured product line. The clutches feature a unique strap drive intermediate plate designed to allow customers to choose the latest OE specification

Read More →
Aftermarketby News/Media ReleaseNovember 9, 2023

ConMet Acquires TruckLabs, the Creator of TruckWings

Commercial truck and trailer parts provider ConMet acquired TruckLabs, the company that created TruckWings, an aerodynamic device that attaches to truck cabs and deploys to close the gap between truck and trailer. TruckLabs now operates as a subsidiary of ConMet.

Read More →
Ad Loading...
Maintenanceby News/Media ReleaseSeptember 27, 2023

Diesel Laptops Releases Fault-Code-to-Part-Number Tool

Diesel Laptops said its Truck Fault Codes allows users to input a fault code and immediately identify and order the parts needed to complete repair work.

Read More →
Maintenanceby News/Media ReleaseSeptember 22, 2023

Heavy Duty Parts and Labor Costs Dropped in Q2

A benchmarking report from TMC and Decisiv reveals good news for fleets as heavy-duty parts and labor costs dropped in the second quarter of 2023.

Read More →
Fleet Managementby News/Media ReleaseAugust 1, 2023

Platform Science, Uptake Partner on Predictive Maintenance Platform

Platform Science and Uptake have formed a partnership aimed at bringing a comprehensive predictive maintenance program to market for U.S. truck fleets.

Read More →
Ad Loading...
Safety & Complianceby StaffJuly 31, 2023

Brake System Problems Again Top Roadcheck OOS Violations

During the 72-hour International Roadcheck inspection blitz in May, inspectors put 19% of commercial vehicles inspected out of service for serious safety violations.

Read More →