The Qwik-Clamp is a corrosion-resistant solution for securing hoses or cables to any support system between a tractor and trailer.    -  Photo courtesy Phillips Industries

The Qwik-Clamp is a corrosion-resistant solution for securing hoses or cables to any support system between a tractor and trailer.  

Photo courtesy Phillips Industries

Phillips Industries has introduced the multi-functional Qwik-Clamp - a corrosion-resistant solution for securing hoses or cables to any support system between a tractor and trailer. 

It converts from a one-, two- or three-hose holder to a cable clamp for a 3-IN-1 by removing an insert.

With the Qwik-Clamp, cable installation takes seconds and requires no tools, according to Phillips.  The clamp’s secure draw latch creates a positive lock, keeping up to three cables or a 3-IN-1 in place, staying connected at over 100 pounds of pull force.

With the insert installed, the Qwik-Clamp supports straight ABS electrical cables and 3/8-inch rubber air hoses, or coiled ABS electrical cables and nylon air lines with long leads.  Without the insert, it will support all Phillips 3-IN-1 assemblies and other applications approximately 1.6 inches in diameter.

 The stainless-steel carbineer allows for quick attachment of the clamp to a tender spring or pogo stick.  The clamp body and insert are made of non-corrosive and UV resistant durable nylon for outstanding performance in extreme weather conditions with a working temperature of -40°F to 150°F.

 In addition to the clamp itself, Phillips has also launched a tracker spring kit with Qwik-Clamp.  It combines the multi-functional technology of the Qwik-Clamp with the strength and durability of the company’s extra heavy-duty galvanized 20.5-inch tender spring.  The entire system clips on and off the back of the cab without unbolting the sliding tracker bar. The result is an all-in-one, easy-to-install cable support system for various applications.