Heavy Duty Trucking Logo
MenuMENU
SearchSEARCH

Navistar Considering Reopening Ontario Plant

Commercial truck manufacturer Navistar International said it could decide by summer whether it will need to restart an idled assembly plant in Canada

by Staff
March 17, 2011
Navistar Considering Reopening Ontario Plant

 

3 min to read


Commercial truck manufacturer Navistar International said it could decide by summer whether it will need to restart an idled assembly plant in Canada.



Chairman and chief executive Daniel Ustian said the company has sufficient truck-making capacity at the moment, but might need the Chatham, Ontario, plant if truck orders continue to trend higher through next year.

"Do we need another manufacturing facility? We don't know the answer to that," Ustian said Wednesday during a conference call with analysts. "At least in the short term, likely no. We're not capacity-limited on making trucks."

Industry-wide production of heavy-duty trucks in North America this year is expected to rise 58 percent to 244,000 vehicles. During previous up-drafts in the cyclical truck industry, the production volumes have climbed significantly higher before peaking.

Ustian said a decision on "whether Chatham fits with us or not" could reached by the middle of the year.

Chatham had been Navistar's primary assembly plant for heavy-duty trucks in North America. But in the midst of slumping demand for commercial trucks, the company two years ago said it needed to reduce its costs by moving truck production from Chatham to plants in Escobedo, Mexico, and Garland, Texas. Navistar laid off Chatham's work force and ceased production there in June, 2009.

The idling of Chatham coincided with the expiration of Navistar's contract with the Canadian Auto Workers Union. Any resumption of production would have to be accompanied by a new contract with the CAW. There are no talks under way between the company and the union, and the two sides have met only occasionally in the past two years. The last meeting occurred in January.

Navistar has insisted that a new contract give the company broad discretion over the size and the use of Chatham's workforce, as well as the plant's production volume. Navistar has suggested the plant could supply trucks for Canada and the Northeast region of the U.S.

So far, the CAW has balked at the company's vision for the plant. Union leaders argue that using the plant as a regional truck supplier would require no more than 200 union workers and result in frequent production outages. Moreover, the union opposes the company's demands that outside contractors be used for maintenance and other plant functions that had been performed by CAW workers. At peak production levels in 2006, the plant employed 1,100 workers and turned out 150 trucks a day.

"It's a tragedy for the workers in our community," Bob Chernecki, an assistant to CAW President Ken Lewenza, said Thursday about the prolonged layoffs. "To just leave [workers] hanging out there is unconscionable. They deserve a decision on what [the company] is going to do with the plant."

Chatham's future became more precarious late last year, when Navistar agreed to bring heavy-duty truck assembly to its Springfield, Ohio, plant as part of a new contract with the United Auto Workers Union. The Springfield plant is the company's main assembly site for medium-duty trucks. Analysts have said Springfield could provide Navistar with enough additional production capacity to accommodate further growth in heavy-duty truck orders.

Tensions between the CAW and the Navistar over maintaining the plant have persisted for nearly a decade. Chatham workers waged a six-week strike against the company in 2002. Navistar announced plans to close Chatham in 2002 and move its production to Escobedo. Ustian relented in 2003 after the union accepted cost reductions for the plant and Navistar received money from federal and provincial government programs for modernizing the plant and training workers.

More Aftermarket

Warehouse aisle with pallet racking filled with boxed inventory at a distribution center.
Maintenanceby News/Media ReleaseJanuary 28, 2026

Phillips Opens High-Tech Distribution Center for Faster Parts Delivery

Phillips Industries’ new Cincinnati-area distribution center is now shipping aftermarket trucking parts nationwide, aiming to speed up delivery times for customers.

Read More →
Volvo VNL tractor-trailer.
Aftermarketby News/Media ReleaseOctober 21, 2024

Volvo to Sponsor America’s Road Team for 2025

Volvo Trucks announced that it is extending its exclusive sponsorship of America’s Road Team for 2025.

Read More →
Aftermarketby StaffApril 4, 2024

Webb to Start Taking Orders for UltraSet Pre-Adjusted Wheel Hubs

Webb, which recently acquired the Stemco Trifecta pre-adjusted hub program, will soon start taking orders for its replacement pre-assembled hub, the UltraSet.

Read More →
Ad Loading...
Maintenanceby News/Media ReleaseMarch 4, 2024

All-Makes Automatic Brake Adjusters, Ride Height Control Valves from Midland

SAF-Holland has added automatic brake adjusters and ride height control valves to its Midland All-Makes Program.

Read More →
Aftermarketby News/Media ReleaseJanuary 25, 2024

ZF Aftermarket Expands [pro]Academy Training

ZF Aftermarket said it is expanding its ZF [pro]Academy training and will be adding 40 new modules this year.

Read More →
Aftermarketby News/Media ReleaseJanuary 19, 2024

Eaton Adds Remanufactured Advantage Line of Clutches

Eaton has added its Advantage clutches to its remanufactured product line. The clutches feature a unique strap drive intermediate plate designed to allow customers to choose the latest OE specification

Read More →
Ad Loading...
Aftermarketby News/Media ReleaseNovember 9, 2023

ConMet Acquires TruckLabs, the Creator of TruckWings

Commercial truck and trailer parts provider ConMet acquired TruckLabs, the company that created TruckWings, an aerodynamic device that attaches to truck cabs and deploys to close the gap between truck and trailer. TruckLabs now operates as a subsidiary of ConMet.

Read More →
Maintenanceby News/Media ReleaseSeptember 27, 2023

Diesel Laptops Releases Fault-Code-to-Part-Number Tool

Diesel Laptops said its Truck Fault Codes allows users to input a fault code and immediately identify and order the parts needed to complete repair work.

Read More →
Maintenanceby News/Media ReleaseSeptember 22, 2023

Heavy Duty Parts and Labor Costs Dropped in Q2

A benchmarking report from TMC and Decisiv reveals good news for fleets as heavy-duty parts and labor costs dropped in the second quarter of 2023.

Read More →
Ad Loading...
Fleet Managementby News/Media ReleaseAugust 1, 2023

Platform Science, Uptake Partner on Predictive Maintenance Platform

Platform Science and Uptake have formed a partnership aimed at bringing a comprehensive predictive maintenance program to market for U.S. truck fleets.

Read More →