There are lots or reasons not to embrace fuel-saving technology (some better than others), but validation exists for tire-pressure mitigation systems. And the payback is significant.
Soft, underinflated tires increase rolling resistance and shorten tire life. TPMS and ATIS systems solve both problems at once.
5 min to read
Soft, underinflated tires increase rolling resistance and shorten tire life. TPMS and ATIS systems solve both problems at once.
Have you equipped your fleet with tire pressure maintenance or monitoring systems? If not, you're not alone. In fact, you are in the majority. Fleet surveys conducted by The North American Council for Freight Efficiency show that only about 10% of fleets have embraced TPMS technology, while about 30% of fleets are using automatic inflation systems on trailers.
Both these technologies have proven themselves in real-world fleet testing, including a long-term study conducted by the U.S. Department of Transportation in 2010. The ROI was there. Fuel savings was there. Reduced unscheduled tire maintenance was there. So what's the hangup? Why are fleets not all over these simple, inexpensive technologies?
With the cost of fuel steadily increasing, conventional wisdom would dictate that available technologies to improve fuel economy efficiency would be widely adopted by the trucking sector. In reality, this is not the case. There are a number of available technologies shown to improve fuel economy that have had limited adoption to date, including TPMS and ATIS.
The report sought to investigate the prevailing barriers to greater adoption of fuel-saving technologies for tractor-trailers in North America.
The study included a unique survey approach. It amassed the perspectives of a number of decision makers in the long-haul sector from fleets, to manufacturers, to integrators and builders, dealers, shippers, and owner-operators to assess the complex issues that govern decisions about technology investment and deployment.
It's worth noting that the study participants are likely to be more technology progressive than the industry as a whole, so the barriers identified in the study are likely to be even more pronounced for the industry as a whole.
Ad Loading...
Six principle barriers were identified:
Uncertainty about payback
Lack of capital
Lack of credible information
Insufficient reliability
Lack of availability
What the study's authors call the split-incentive barrier.
When it comes to investing in tire-pressure mitigation systems as a fuel savings measure, most of the reasons cited by the respondents fail to meet the definitions of the barriers described above. There is a great deal of data available quantifying the payback, they are not expensive relative to the savings they produce, reliability of the systems has improved over time, and they certainly are not hard to come by.
That leaves the so-called split-incentive barrier, which is described as a situation where the party paying for the product is not the same party that would realize the savings. One could see where that might play in this discussion, but it shouldn't be an insurmountable barrier in most cases.
Next page: Real-World Results
Ad Loading...
[PAGEBREAK]Real-World Results
Tire pressure monitoring systems alert driver and fleet managers to low-pressure situations than can suck fuel and ruin tires.
The results of a research project conducted by the U.S. Department of Transportation between 2008 and 2010 were made public last year at the Technology and Maintenance Council of the American Trucking Associations annual meeting in Tampa. Presented by Chris Flanigan of the Federal Motor Carrier Safety Administration's Office of Analysis, Research and Technology, the study quantified the ROI on both TPMS and ATIS systems.
"We saw an increase in fuel economy in both fleets of 1.4%," Flanigan told the crowd. "And based on current fuel costs [about $4/gallon] and equipment costs of about $1,500 per tractor-trailer unit, the ROI comes in under one year."
The study was comprehensive. It documented fuel savings accrued from running correctly inflated tires, as well as the savings in tire wear, premature failures due to under inflation and the reduced maintenance costs resulting from longer tire life and the lower failure rate.
Flanigan said the results showed both fleets experienced an equal reduction in fuel consumption of 1.4 percent. Tread wear reductions recorded in the Sheetz fleet were notable. Steers tires saw an improvement in tread wear of 5/32 per million miles and trailer tires saw an improvement of almost 2/32 of an inch per million miles. The drive tires improved by nearly 3/32 per million miles.
So, that lays to rest the questions of uncertainty about payback and the lack of credible information. Granted it was one study, but there are others reporting similar results. In fact, in its report on tire pressure systems, NACFE's fleet survey reported similar results among users that responded using the payback calculator tool.
Ad Loading...
The NACFE calculator shows, for example, a payback for TPMS systems of about 14 months and 9 months for ATIS systems. It demonstrated improvements in tire wear of 4% and 8% respectively and fuel economy improvements of between 0.75% and 1.25%.
In the follow up interviews to the initial survey, Mike Roeth, executive director of NACFE, saw fleets getting 1.5% improvement in fuel economy just by keep tires properly inflated.
"I'd say to produce savings on that magnitude, the fleet would have had pretty poor tire management before installing the systems," he said. "In this case, we looked only at the fuel savings. Imagine what better pressure management did for their tire costs."
In the case of tire-pressure mitigation systems, it's likely that both the fuel purchasing department and the maintenance department would share in the savings. One of the barriers reported in the detailed survey analysis of these systems was a feeling in the maintenance department that added complexity of the systems and potential installation and ongoing maintenance concerns would add up to more trouble than they were worth. The cost/benefit analysis seems to dispute that too, both in the DOT study and the NACFE Fleet Survey.
There is fuel savings and tire wear savings and reduced tire failure savings to be had, all from the installation of a couple of simple, inexpensive and unobtrusive systems. If you need more information, the purveyors of such product would be glad to help. Or you can read the full Barriers reports. If you're looking for excuses, they're all in there. If you want results, that's in there too.
The Environmental Protection Agency said California can’t enforce its Heavy-Duty Inspection and Maintenance Regulation, known as Clean Truck Check, on vehicles registered outside the state. But California said it will keep enforcing the rule.
The Trump administration has announced it will no longer criminally prosecute “diesel delete” cases of truck owners altering emissions systems in violation of EPA regulations. What does that mean for heavy-duty fleets?
Natural gas is quietly building a reputation as a clean, affordable, and reliable alternative fuel for long-haul trucks. And Ian MacDonald with Hexagon Agility says the Cummins X15N is a big reason why.
Mercedes-Benz has begun a new series of tests in Europe to validate vehicle compatibility with megawatt chargers and assess charging performance, thermal management, and usability on long-haul duty routes.
Safety, uptime, and insurance costs directly impact profitability. This eBook looks at how fleet software is evolving to deliver real ROI through proactive maintenance, AI-powered video telematics, and real-time driver coaching. Learn how fleets are reducing crashes, defending claims, and using integrated data to make smarter operational decisions.
Fleet software is getting more sophisticated and effective than ever, tying big data models together to transform maintenance, safety, and the value of your existing tech stack. Fleet technology upgrades are undoubtedly an investment, but updated technology can offer a much higher return. Read how upgrading your fleet technology can increase the return on your investment.
Idle reduction for heavy-duty trucks has come a long way. An updated playbook from the North American Council for Freight Efficiency explains what technologies deliver results today — and what’s coming next.