For 2010, the U.S. Department of Energy expects diesel prices to average nearly $3 a gallon. As diesel prices head back up, it may be time to look at the possibility of switching to a more fuel-efficient engine oil.
Several lubricant companies have recently made announcements related to fuel-saving engine oils.
New research from Chevron finds you could save as much as 1 percent on your fuel economy simply by switching from a 15W-40 engine oil to a 10W-30 oil.
Chevron conducted fuel economy testing using the Volvo D12D Fuel Economy Test, a lab-based test used in Europe. This kind of testing allows researchers to precisely load the engine and run it under prescribed conditions the computer controls.
The Chevron testing used a 15W-30 as a reference oil. The results were "weighted" with factors to represent hilly conditions or flat conditions.
In flat conditions, a 15W-40 oil performed nearly 0.8 percent worse than the base 15W-30. The 10W-30 performed nearly 0.2 percent better than the 15W-30. That's close to a 1 percent difference between the 15W-40 and the 10W-30.
Why Lower Viscosity can Save Fuel
The oil pump in the engine sucks the oil out of the oil pan, pumps that oil and circulates it around in your engine to lubricate it - much like your heart pumps to circulate the blood in your body. The thicker that oil is, the more energy it takes to pump that oil, which uses fuel.
Just like people may take blood thinner to make it easier on their heart to pump it, it's the same with engine oil.
Or, as Shell's Chris Guerrero explained it during the introduction of Shell's revamped Rotella line (including a fuel-efficient 10W-30 Rotella T5 synthetic blend): "If you think about a swimming pool filled with water and a swimming pool filled with honey, you'd find it easier to swim in water than honey, because the honey is more viscous. Lower viscosity makes it easier to pump and lubricate."
So why not go even lower? Why not a 5W-30?
In a multigrade engine oil rating, the first number, like the 10W or 15W, indicates how thick the engine is under low temperature conditions. The second number, the 30 or 40, is how the engine behaves at full operating temperature.
Most heavy-duty trucks and even midrange trucks operate most of the time at operating temperature, explains Gary Parsons, Global OEM and industry liaison manager for Chevron Oronite Co. "So you see a fuel economy difference more related to the 30 vs. the 40 rather than the 10W vs. the 15W."
While the 5W-30 performed even better in Chevron's test, at close to 0.4 percent over the base 15W-30 oil, 5W-weight oils typically require more synthetic base oils, raising the cost, Parsons says. On top of that, at the moment, according to Shell, a 5W-30 does not meet API CJ-4 engine standards for heavy-duty diesel engines.
Many truckers are skeptical of lower-viscosity engine oils, believing they won't offer enough protection. However, lower-viscosity oils for heavy-duty engines are being adopted successfully in other parts of the world. And lubricant developers are well aware of the concern.
"If you're going to improve fuel economy, one of the biggest things customers say is there needs to be no reduction in durability," says Dan Arcy, OEM technical manager for Shell Lubricants. "So we built in the same wear protection as we'd get from a 15W-40 product." Arcy has results to prove it from engine tests as specified by Mercedes, Volvo and other manufacturers. And Mack, he says, is scheduled to come out with the first 10W-30 approval list in North America, and the new Rotella T5 will be on that list.
Part of the reason you can use lower-viscosity oils today is that the precision and the tolerances in the engine hardware itself is much better, Parsons says. Today's engines are produced with high-tech machining practices that create surfaces with fewer microscopic peaks and valleys - more mirror-like.
