Cummins Extends Oil Drain Intervals to 80,000 Miles
Cummins says X15 Efficiency Series and X15 Performance Series engine owners can extend their oil drain intervals up to 80,000 miles using the free Cummins OilGuard program, which uses engine performance data and oil analysis to safely optimize oil drain intervals.


NASHVILLE – Cummins says X15 Efficiency Series and X15 Performance Series engine owners can extend their oil drain intervals up to 80,000 miles using the free Cummins OilGuard program, which uses engine performance data and oil analysis to safely optimize oil drain intervals.
For years, recommended oil drain intervals have been based on a set distance and/or time period. The Cummins OilGuard program allows participating truck owners to safely extend oil change intervals while keeping full warranty coverage for their Cummins engine.
"With oil changes routinely costing $350 or more for the oil, oil filter, labor and disposal costs – and a typical over-the-road trucker performing two to three oil changes per year – we see the potential to significantly reduce costs and downtime, with some customers needing an oil change only once a year," said Mark Ulrich, director of customer support, "Most importantly, you get an optimized oil change interval while preserving your warranty coverage, and at no risk to engine component durability or resale value."
It starts with a selection of test vehicles and a monitoring program with regular submission of engine data and oil samples for analysis, covering a minimum of two oil change intervals. For example, fleets desiring an 80,000-mile oil change interval will be required to submit samples every 10,000 miles.
Full warranty coverage will continue throughout the testing/analysis period. Once the results are received, Cummins will present the findings, identifying the vehicles and duty cycles eligible for a longer oil-drain interval. The optimized drain interval will then become the required maintenance for warranty coverage. Periodic follow-up testing may be requested by Cummins for verification that no changes in operation or maintenance practices have taken place that might impact the approved oil drain interval.
Use of a Cummins-approved CK-4 or FA-4 engine oil is required in order to qualify. Cummins recommends the use of Valvoline Premium Blue engine oils, which are already approved by Cummins for 60,000-mile oil drain intervals in 2017 Cummins X15 engines. That's a 10,000 mile extension compared to other CK-4 engine oils.
Cummins will provide sample kits, prepaid mailers and the oil analysis free of charge to every customer participating in the program. The Cummins OilGuard program is currently available for 2017 and newer X15 engines; however, Cummins said it could be extended to other engines in the near future.
More Maintenance

DTNA Software Update Gives Truckers More Time Before DEF Derates Take Effect
The changes reflect EPA guidance aimed at reducing downtime caused by emissions-system faults while maintaining compliance requirements.
Read More →
New Agentic Predictive Maintenance Report Demonstrates How Degraded Aftertreatment Systems Waste Fuel
Questar analyzed a large mixed-class fleet and discovered it was wasting as much as $30 in fuel per vehicle, per day, because of mechanically degraded aftertreatment systems.
Read More →
Mack, Volvo Issue ‘Do Not Drive’ Recall on Possible Wheel-Offs
Owners will be sent advance notice not to operate their affected vehicles until the remedy is performed.
Read More →
Why Fleet Data Matters More Than Ever at Waste Connections [Watch]
Waste Connections' Chuck Palmer explains how telematics, predictive maintenance, safety analytics, and AI help keep vehicles on the road and drivers safe in this episode of HDT Talks Trucking.
Read More →
How to Prevent Summer Truck Cooling System Failures
Summer heat puts heavy-duty truck cooling systems under intense strain. Learn how preventive maintenance and accurate repair information can help reduce downtime.
Read More →
Deadline Extended for HDT Truck Fleet Innovators Nominations
Heavy Duty Trucking has extended the deadline for nominations for its Truck Fleet Innovators awards. The deadline has been extended to May 22.
Read More →
Why VMRS Is the Natural Link Between AI, Predictive Analytics, and Vehicle Repairs [Commentary]
Jon White was a leading figure in the development of VMRS. Now, after five decades of service, White says VMRS is becoming essential to the AI-driven future of truck maintenance.
Read More →
Mack Trucks Revamps PartsASIST Platform with Faster Performance, Improved Navigation
Mack Trucks has launched a redesigned version of its PartsASIST online ordering platform, adding faster search, real-time inventory visibility and enhanced order tracking.
Read More →
International Debuts ‘My International’ Connected Platform to Centralize Fleet Data, Service, and Dealer Communication
International’s New digital ecosystem unifies telematics, maintenance, and dealer interaction into a single interface, aiming to reduce downtime and deliver predictive fleet insights.
Read More →
Saving Fuel at the Wheel End
Wheel ends are often overlooked in the quest for better fuel economy. But Joshua Kucera, product manager, Stemco, warns that neglecting wheel ends can reduce fuel economy and increase maintenance headaches.
Read More →

