Link Manufacturing announced an enhanced 20K axle that incorporates the technological and component upgrades available in the company’s lighter-capacity suspensions.
The company will unveil more details of the 20K self-steer suspension at this year’s NTEA Work Truck Show in Indianapolis, Indiana. With the formal introduction of its upgraded 20K axle, Link has consolidated its self-steer suspension lineup, creating a uniform offering .
Link’s family of 8K, 10K, 13.5K and 20K self-steer auxiliary suspensions features Swift Mount technology, allowing installation to be completed in as little as two hours. Link’s Swift Mount interchangeable ride height brackets incorporate improvements in the way the frame brackets attach to the suspension hanger. The brackets can be used to mount any Link suspension, and by maintaining four sets in inventory, installers can be prepared for nearly any installation.
Link’s Swift Mount design uses a unique stepped-edge on the frame bracket, offering installers a visual indicator to help center the suspension on the truck. By simply comparing the frame bracket-to-hanger location for both the driver and passenger sides, the suspension is easily centered, greatly reducing installation times.
Rear air spring brackets are compatible with wide flange frame rails, accomplished by having the air fittings oriented to the outside. The air fittings can also be repositioned to the inside if desired. For ease of service later, the air springs can be removed and replaced without needing to remove the bracket from the truck. An optional bulkhead air control system is also available, fitting within each axle’s compact mounting envelope. All air fittings are push-to-connect, and air tanks are designed to mount slightly above cross members, protecting them in cases where the suspension bottoms out.
“We listened to the marketplace and responded by adding compelling features to our existing family of self-steer auxiliary suspensions, along with unparalleled installation and performance advantages,” said Jim Huls, president of Link Manufacturing. “Their structural durability, corrosion resistance and standardization characteristics will impress bodybuilders, fleets and drivers alike.”
All Link self-steer auxiliary suspensions are equipped with rugged cast lift arms and Link-KOAT migratory self-healing metal treatment. Link-KOAT provides corrosion resistance and rust protection, even when surfaces are exposed to excessive abrasion, harsh chemicals and other severe-duty environmental factors.
The 8K and 10K members of the auxiliary suspension family share the same hardware and are designed for more robust performance and feature heavy-duty bearings. To support its broad range of applications, Link’s 13.5K suspension with optional premium disc brake package will be available in April 2019.