LOUISVILLE, KY -- Eaton is expanding its Advantage Series transmission line up to meets the needs of broader group of regional and line haul carriers, as well as those operating 6x4 and 6x2 configurations. The new Advantage offerings include three manual models with new direct-drive gear ratios, two automated models with new direct drive gear ratios and four automated versions with new overdrive ratios.

All of the Fuller Advantage Series automated 10-speed transmissions are available for delivery to all North American truck makers. Small-step 'S' ratio models, with fuel-efficient shifting between 9th and 10th gears, are rated up to 80,000 gross combination weight only. The remaining models (direct and overdrive) will be rated up to 110,000 GCW at the end of April this year.

“Our customers have been asking us for additional ratio coverage in both direct drive and overdrive designs,” said Ryan Trzybinski, product planning manager at Eaton. “All of the direct drive additions are ideally suited for a variety of linehaul applications and will be especially beneficial for regional and LTL customers with day cabs and 6X2 axles. The other additions are ideal for linehaul/on-highway fleets and provide better options for customers preferring axle ratios that are best suited for an overdrive transmission.”

COAST MODE MADE FOR SAVINGS

In addition to the wider product offerings, Eaton will now offer a 'coast' mode with its Advantage and UltraShift automated transmissions, enabling disengagement of the truck’s driveline while on slight downhill grades to drop engine speeds to idle. Eaton says the new technology improves fuel consumption by up to one percent while ensuring safe operation regardless of driving conditions.

Known internally at Eaton as Neutral Coast Mode, it will be named SmartCoast when paired with a Cummins engine, Fuel Efficient Coast when paired with a Navistar engine, and Neutral Coast when paired with a PACCAR engine. It is available on all vehicles with a 2013 or newer Cummins ISX15, Navistar N13, or PACCAR MX-13 engine.

Eaton says the disengagement takes place within the synchronizer section of the transmission, The clutch itself does not disengage.

“This new option promises to bring fuel efficiency improvements to linehaul fleets typically traveling on roads where hills and grades are present,” Trzybinski says. “The gains will vary depending on the amount and severity of grades encountered.”

Neutral Coast Mode allows the transmission to disengage the driveline by pulling out of gear on downhill grades where little or no engine power is required, when the vehicle is in cruise control and the transmission is in Drive mode. The vehicle’s display will simultaneously flash a gear number that represents the gear that the transmission will select when it is necessary to engage.

The transmission exits Neutral Coast Mode under any of the following conditions:

  • Vehicle brakes are applied.
  • Driver presses accelerator pedal.
  • Cruise control is cancelled.
  • A mode other than Drive is selected.
  • Cruise high or low set speeds are exceeded.
  • Maximum vehicle grade is exceeded.
  • Request by an adaptive cruise system.

The maximun coast speed is a fleet-programmable setting, which can be set to eliminate speeding by disengaging coast mode a the set speed and activating the engine brake if necessary to keep vehicle speed in check.

“Neutral Coast Mode features Eaton proprietary logic that works with the engine ECU or another ECU to determine the appropriate time for the transmission to decide when the driveline should be engaged or disengaged,” added Trzybinski.

About the author
Jim Park

Jim Park

Equipment Editor

A truck driver and owner-operator for 20 years before becoming a trucking journalist, Jim Park maintains his commercial driver’s license and brings a real-world perspective to Test Drives, as well as to features about equipment spec’ing and trends, maintenance and drivers. His On the Spot videos bring a new dimension to his trucking reporting. And he's the primary host of the HDT Talks Trucking videocast/podcast.

View Bio
0 Comments