Trailer Talk

This normal-looking tanker rig's more than it seems

September 6, 2012

SHARING TOOLS        | Print Subscribe

The handsome tractor and shiny tank trailer in this photo are more than they seem. Instead of the typical 75,000- to 80,000-pound, five-axle rig you'd find in many areas of the country, this one weighs 102,000 pounds, or did when driver Jack Mirando and I arrived at this asphalt plant north of Lake George Village, N.Y., in the Adirondaks on a sunny day in late July.

Fifty-one tons is legal on five axles in New York State under special permit, and Peckham Materials, a producer and distributor of construction-related chemicals and supplies in the Hudson River Valley, runs them regularly.

ADVERTISEMENT


Safety zealots opposed to bigger and heavier trucks for America's roads might cringe if they heard of this, as they are convinced that such numbers mean almost automatic death for anyone around.

But Peckham runs them safely, thanks to strong equipment and driving pros like Mirando, who's in his 15th year with the company. He let me drive the rig from a terminal near Albany to the plant, about 120 miles one-way, and back again while empty. It was a leisurely trip because the near-new Kenworth T800 tractor had a 500-horse Cummins ISX15 running through an Allison automatic six-speed - hardly work at all.

The 11 tons of extra payload beyond the normal federal limit means efficiency, and the tankers deliver the loads reliably, said Larry Fingar, shop supervisor in the company's Athens, N.Y., terminal.

Etnyre in Oregon, Ill., made these and most of the fleet's other tank trailers, and they are stout and durable - important because Peckham keeps its equipment a long time. There is no planned trade cycle, so they are maintained regularly and repaired as necessary and just keep working.

Fingar likes weight distribution on these rigs to be 10,000 pounds on the steer axle and 46,000 on each of the tandems. One or two extra axles allow more loading, and in the yard were a couple of brand-new three-axle tankers that will allow a gross combination weight of 107,000 pounds when they are licensed and operable.

In driving this rig I was aware that it was heavy, but it was not ponderous. Mirando coached me through all tight-radius turns so I wouldn't topple us and turn our load into a messy incident.

Stopping for traffic lights took a strong foot on the brake pedal, but I learned that punching the down-shift buttons on the Allison's selector pad let the Cummins Intebrake do much of the decelerating work. Otherwise the trip was a no-sweat operation.

The 7,900 gallons of hot (320 degrees F) liquid asphalt in our load was sucked out of the tanker by a stationary electric pump and sent to nearby tanks. Then it flowed into mixing bins and combined with aggregate (mined and precisely crushed in a nearby Peckham quarry) and other ingredients, to become the familiar black paving material.

A steady stream of dump trucks were taking on several tons at a time and hurrying off to road and parking lot projects.

By my calculations, five of these 51-ton rigs about do the work of six 40-tonners, taking some traffic off the highways leading up here to the plant. That's called productivity.

Ecofreaks might also be happy to know that the liquid asphalt came by railcar from a refinery in the Midwest and was loaded aboard the tanker at a rail yard at Athens. Fingar says other shipments of liquid asphalt go by barge to various Peckham terminals for truck distribution right where it's needed.

Know what? I'm sort of an ecofreak, and I like this sort of rational transportation using the most efficient mode, and equipment, for each leg. I'm a motorist, too, and I appreciate how extra payload reduces road traffic. What do you think?

Comments

  1. 1. Mr. Dito [ September 15, 2012 @ 06:33PM ]

    Rather than using a tandem trailer, why won't more states look at using Super-b trailers??? Rather than only bringing in 102.000 lbs of goods, think of the extra 38,000 lbs you can bring in with a Super-b!!!
    I haul fuel in Alberta, Saskatchewan and BC, and pulling 140,000 lbs behind a truck is the norm out here in western Canada... maybe the states should start looking hauling more loads using this configuration (8 axles)

Comment On This Story

Name:  
Email: (Email will not be displayed.)  
Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

Author Bio

Tom Berg

Senior Editor

Journalist since 1965, truck writer and editor since 1978. CDL-qualified; conducts road tests on new heavy-, medium- and light-duty tractors and trucks. Specializes in vocational and hybrid vehicles.

Sponsored by

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by


WHEEL ENDS SOLUTIONS

Wheel end expert Jeff Geist from STEMCO will answer your questions
Ask a question

Sponsored by

Magazine