Trailer Talk

Pre-trip preparations can maximize reefer uptime in hot summer temperatures

August 8, 2011

SHARING TOOLS        | Print Subscribe
If something on a reefer unit is going to fail, it's likely to happen when components are working hard to overcome summer heat.
So service specialists at Thermo King, a major manufacturer of temperature control systems for a variety of mobile applications, have put together a short list of tips to use in preparing reefer equipment for the road:

1. Change or top off any engine fluids such as oil and coolant.

2. Request a controlled refrigerant level test to assure the unit is operating at peak cooling capacity.

ADVERTISEMENT

3. Check and adjust or replace all belts

4. Test defrost cycle to assure maximum operating performance

5. Service the fuel system, to include:
* Replacing fuel filter(s)
* Draining any water or sediment from fuel tank
* Cleaning fuel inlet screens
* Possibly adding a secondary fuel sediment bowl/ filtering device

6. Run a complete pre-trip.

7. Make sure engine speeds are adjusted to factory specifications for smoothest operation and fuel efficiency.

These services and inspections should be performed by qualified service professionals.

Another thing TK is doing to help customers out while this record heat is putting strain on refrigeration units is its annual Instant Rebate program. Now in its eighth year, the program allows customers to buy quantities of genuine Thermo King parts and PG parts for Carrier units, with rebates of up to $250 per item. It runs through the end of September.

Parts and accessories eligible for rebates include:

* Belts
* Alternators
* Driers
* Electrical
* Water pumps
* Refrigeration parts
* Starters
* PrimAir chutes
* Filters
* Compressors
* EON batteries
* PG Parts for Carrier Transicold units

Comment On This Story

Name:  
Email: (Email will not be displayed.)  
Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

Author Bio

Tom Berg

Senior Editor

Journalist since 1965, truck writer and editor since 1978. CDL-qualified; conducts road tests on new heavy-, medium- and light-duty tractors and trucks. Specializes in vocational and hybrid vehicles.

Sponsored by

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by


WHEEL ENDS SOLUTIONS

Wheel end expert Jeff Geist from STEMCO will answer your questions
Ask a question

Sponsored by

Magazine