Maintenance

CSA

1  -  8  of  8

March 2014, TruckingInfo.com - Editorial

Commentary: How Much do Your Technicians Know About Wheel Integrity?

By Rolf Lockwood, Executive Contributing Editor

Executive Contributing Editor Rolf Lockwood discusses wheel integrity and the importance of technicians being well-versed in the rules of fastening wheels properly.

Tags: FMCSA, CSA, Wheels, Wheel-offs, Technicians

March 2014, TruckingInfo.com - Feature

Avoiding Common Maintenance Mistakes

Drivers need to be trained to distinguish when a fault code means the truck needs to be brought in immediately and when it is okay to wait for the next scheduled maintenance appointment.

By Denise Rondini

Fleets try to do a good job of keeping their trucks in top operating condition, and most recognize that maintenance plays an important role in achieving that goal. Still there are some things that get overlooked by even the most seasoned fleet manager.

Tags: Maintenance, CSA, Aftermarket, Ryder Systems, Decisiv, Preventative Maintenance, VMRS, W.W. Williams

January 2014, TruckingInfo.com - Department

Keeping Your Wheels in the Game (updated)

Pictures are worth a thousand words, they say. What sort of a message do the wheels on this trailer convey about its owner?

By Jim Park

Back in 1984, the Occupational Safety and Health Administration issued a regulation requiring that truck wheels be stripped of rust and debris before mounting a tire. Easier said than done, the industry moaned at the time. Labor was less costly then, but wire brushes and elbow grease weren’t going to cut it.

Tags: OSHA, Goodyear, CSA, TMC, Tires, Wheels, IMI, Wheel refinishing, Maxion Wheel

August 2013, TruckingInfo.com - Feature

Five Steps to Successful Outsourcing

When you are looking to outsource your maintenance, make sure to consider all the angles.

By Deborah Lockridge

When you are looking to outsource your maintenance, make sure to consider all the angles. Fleets have long wanted to outsource more maintenance, but have been frustrated by problems with the quality, cost and speed of the work. Today, there are more pressures on fleets to outsource than ever.

Tags: Ryder, CSA, Rush Enterprises, WheelTime, Maintenance outsourcing, NationaLease, Maintenance

July 2013, TruckingInfo.com - WebXclusive

What Exactly Constitutes an Underinflated Truck Tire?

"Underinflated" isn't always this obvious. Enforcement officials are looking for a usable definition. (Photo by Evan Lockridge)

By Jim Park

Why should we worry about defining underinflation? Because of the Federal Motor Carrier Safety Administration's CSA (Compliance, Safety, Accountability) enforcement program.

Tags: CSA, TMC, Tires, CVSA, Enforcement

June 2013, TruckingInfo.com - WebXclusive

Tires are Key Component of CSA Inspections

By Truckinginfo Staff

As one of the two biggest non-labor expenses that trucking fleets have, tires require careful maintenance. The Federal Motor Carrier Safety Administration’s Compliance, Safety, Accountability program further underscores the importance of good tire maintenance practices.

Tags: Maintenance, Goodyear, CSA, Tires

January 2013, TruckingInfo.com - Feature

Motor Carriers Make Adjustments While CSA is Fine-Tuned

By Bob Rose, Contributor

In December, the FMCSA made good on its commitment to Congress to install refinements to the CSA initiative by implementing 11 changes to the Safety Measurement System. J.J. Keller's Bob Rose has more details.

Tags: FMCSA, Safety, J.J. Keller, compliance, CSA, Hazmat

January 2013, TruckingInfo.com - Feature

Troubleshooting Trailer Lights

One of the most common reasons for an officer to pull a driver over is for a faulty light. Below are some basic guidelines on how to troubleshoot some of the problems that may arise with a trailer lighting system

Tags: Trailers, CSA, Lighting, Safety, compliance

« Previous1Next »

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.

GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by


WHEEL ENDS SOLUTIONS

Wheel end expert Jeff Geist from STEMCO will answer your questions
Ask a question

Sponsored by

Magazine