
Collision avoidance systems reduce accidents and save lives and injuries, and should be standard on all new passenger and commercial vehicles, the National Transportation Safety Board declared in a statement yesterday.
Collision avoidance systems reduce accidents and save lives and injuries, and should be standard on all new passenger and commercial vehicles, says the National Transportation Safety Board in recommendations announced Monday.

As this illustration for Meritor Wabco's Onguard system illustrates, forward collision avoidance technologies "see" obstacles ahead.

Collision avoidance systems reduce accidents and save lives and injuries, and should be standard on all new passenger and commercial vehicles, the National Transportation Safety Board declared in a statement yesterday.
In a Special Investigation Report, NTSB said the electronic systems can prevent or lessen the severity of rear-end crashes.
The safety board cited government accident statistics that indicated rear-end crashes killed about 1,700 people in 2012 and injured 500,000 more. More than 80% of these deaths and injuries might have been mitigated had the vehicles been equipped with a collision avoidance system, NTSB said.
“However, slow and insufficient action on the part of the National Highway Traffic Safety Administration to develop performance standards for these technologies and require them in passenger and commercial vehicles, as well as a lack of incentives for manufacturers, has contributed to the ongoing and unacceptable frequency of rear-end crashes,” the board said in the report issued last month.
NTSB said it has investigated rear-end crashes and has encouraged technological countermeasures since 1995. To date, the board has issued 12 recommendations pertaining to this safety issue, including in another Special Investigation Report in 2001.
However, the board has no power on its own to make regulations. NTSB investigates crashes of commercial motor vehicles, trains and airplanes, and often recommends actions in its reports to other government agencies, associations, industries and others.
“Due to a lack of progress in the implementation of NTSB recommendations intended to mitigate or prevent rear-end crashes, the recent technological advancements in collision avoidance technologies, and the continued prevalence of rear-end crashes, the NTSB is revisiting the topic of rear-end crash prevention,” it said.
"Because there will always be better technologies over the horizon, we must be careful to avoid letting perfection become the enemy of the good."
“The promise of a next generation of safety improvements has been used too often to justify inaction,” said NTSB Chairman Christopher A. Hart. "Because there will always be better technologies over the horizon, we must be careful to avoid letting perfection become the enemy of the good."
In the report, the NTSB recommends that manufacturers make collision avoidance systems standard equipment in newly manufactured vehicles, beginning with collision warning systems, and adding autonomous emergency braking once NHTSA completes standards for such braking systems.
Furthermore, the NTSB recommends that NHTSA develop tests and standards in order to rate the performance of each vehicle’s collision avoidance systems and to incorporate those results into an expanded NCAP 5-star safety rating scale.
The NTSB is also issuing a companion Safety Alert for consumers and commercial fleet owners that urges them to consider vehicles with collision warning and autonomous emergency braking functions.

Heavy Duty Trucking is searching for forward-looking leaders at trucking fleets as nominations for HDT’s Truck Fleet Innovators 2026. Deadline is May 15.
Read More →
Detroit’s next-generation ABA6 safety system adds cross-traffic detection and enhanced side guard assist with left-turn protection, targeting high-risk urban scenarios.
Read More →
The American Transportation Research Institute will examine driver coaching, regulatory impacts — including the "Beyond Compliance" concept —and weather disruptions that shape trucking operations.
Read More →
New requirements add firm deadlines and independent review steps, addressing long-standing complaints about inconsistent rulings and slow response times.
Read More →
Five states still aren't ready to accept commercial driver medical exam information directly from the medical examiner's registry.
Read More →
Heavy Duty Trucking's Top 20 Products awards recognize the best new products and technologies. Check out the award presentations at the 2026 Technology & Maintenance Council annual meeting.
Read More →
The Detroit® Gen 6 engine platform proves that real progress doesn’t require a complete redesign. Built on 20 years of trusted technology, these engines are designed for efficiency, stronger performance, and greater reliability than before. And they do it all while complying with 2027 EPA standards on every mile.
Read More →
Aperia Technologies introduced a new automatic tire inflation system for steer axles and a partnership with Fontaine Fifth Wheel to integrate coupling status into its Halo Connect platform.
Read More →
Fleetworthy and HAAS Alert expanded their partnership to deliver real-time digital alerts that warn motorists when commercial trucks are stopped roadside and notify truck drivers when approaching emergency responders.
Read More →
More than 100,000 new trucking companies enter the industry each year, but regulators manage to audit only a fraction of them. That churn creates opportunities for inexperienced startups — and for “chameleon carriers” that shut down after safety violations and reappear under new identities. Read more from Deborah Lockridge in this commentary.
Read More →