Washington State Files Lawsuit Against Trucker, Carrier Over Bridge Collapse
The Washington State Department of Transportation on Monday filed a $17 million lawsuit to recoup the costs of response and repair following the 2013 over-height truck collision that caused a portion of the Skagit River Bridge on Interstate 5 to collapse.
by Staff
February 3, 2015
Water level view of the accident scene. Photo: NTSB
3 min to read
Water level view of the accident scene. Photo: NTSB
The Washington State Department of Transportation on Monday filed a $17 million lawsuit to recoup the costs of response and repair following the 2013 over-height truck collision that caused a portion of the Skagit River Bridge on Interstate 5 to collapse.
Ad Loading...
The suit, filed in Skagit County Superior Court, named as defendants: William Scott, the truck driver; his employer, Mullen Trucking LP; Tammy Detray, the pilot-car driver and her company, G&T Crawlers; and the owner of the metal shed being transported, Saxon Energy Services Inc.
Ad Loading...
On May 23, 2013, a large tractor trailer combination with an over-height load slammed into multiple overhead braces of the I-5 Skagit River Bridge, about 60 miles north of Seattle The force of those strikes severely damaged the bridge and forced its collapse into the river. Two vehicles also fell into the water. Three people suffered minor injuries while there were no deaths. The bridge has since been repaired.
The Washington State Patrol Major Accident Investigative Team cited the truck driver for “negligent driving, stating the bridge collapse resulted from a series of miscalculations, mistakes and errors by the truck driver and his employer,” according to a release from the Washington State DOT.
The investigative team also claimed the truck driver did not know the accurate height of his oversized load, and received a permit for a load two inches lower than the one he carried plus failed to research the route to ensure it could accommodate his over-height load.
“Had he taken the advanced safety steps required of all drivers who haul oversized loads, he would have known the left southbound lane of the bridge provided adequate vertical clearance for the load,” the department said.
The investigative team also determined pilot-car driver was on the phone as she crossed the bridge and did not notify the truck driver of the height clearance pole striking the bridge, while the truck driver was following the pilot car too closely and would not have been able to stop in time even if the pilot-car driver had notified him of the pole strikes.
Ad Loading...
According to the state DOT, the owner of the shed that struck the bridge, also is financially responsible for the catastrophic damage caused by this collision, under state law.
According to the Associated Press, Canada-based Mullen Trucking would not comment on the lawsuit, but did confirm the driver still works for the company, who is reportedly on assignment in the Arctic. He was also not available for comment. Attempts to get comments from the cargo owner and the pilot car driver were also unsuccessful.
Last July the National Transportation Safety Board issued a report blaming the bridge collapse multiple sources, including the truck driver, Mullen and the pilot car driver, but also found problems with the Washington State DOT and its permitting process for oversize loads.
In November, investigators from the Washington State Patrol issued their report that blamed the truck driver.
Aperia Technologies introduced a new automatic tire inflation system for steer axles and a partnership with Fontaine Fifth Wheel to integrate coupling status into its Halo Connect platform.
Fleetworthy and HAAS Alert expanded their partnership to deliver real-time digital alerts that warn motorists when commercial trucks are stopped roadside and notify truck drivers when approaching emergency responders.
More than 100,000 new trucking companies enter the industry each year, but regulators manage to audit only a fraction of them. That churn creates opportunities for inexperienced startups — and for “chameleon carriers” that shut down after safety violations and reappear under new identities. Read more from Deborah Lockridge in this commentary.
Mack Trucks has expanded its proprietary Mack Protect collision mitigation platform to the Mack MD Series, bringing heavy-duty safety technology to medium-duty trucks operating in urban and regional environments.
In today’s cost-conscious market, fleets are finding new ways to get more value from every truck on the road. See how smarter maintenance strategies can boost uptime, control costs and drive stronger long-term returns.
Two Canadian fleets earned the Grand Prize in the Truckload Carriers Association’s 2025 Fleet Safety Awards, recognizing the industry’s top safety performance based on accident frequency and safety programs.
New guidance for commercial vehicle inspectors distinguishes between more traditional logbook violations and tampered ELD data that can result in mandatory 10-hour out-of-service orders.
Daimler’s new factory-installed system integrates side and forward-facing cameras with in-cab touchscreen to improve jobsite visibility and reduce upfit complexity.
Kodiak has integrated HAAS Alert’s Safety Cloud platform into its autonomous vehicle control system to send real-time digital hazard alerts to nearby motorists.