
It’s a matter of physics.
Trucks using speed limiters had a ratio of 1.6 crashes per 100 trucks per year, while those without had a ratio of 2.9.

Deborah Lockridge

It’s a matter of physics.
That’s what Mark Rosekind, administrator of the National Highway Traffic Safety Administration, said in announcing a proposal to mandate speed limiters in heavy trucks.
“Even small increases in speed have large effects on the force of impact,” Rosekind said in a statement “Setting the speed limit on heavy vehicles makes sense for safety and the environment.”
The proposal, announced Aug. 26 by NHTSA and the Federal Motor Carrier Safety Administration, doesn’t call for a specific speed limit. Instead, it outlines the estimated benefits of 60, 65 and 68 mph and asks for comments on the wisdom of those speeds — or what other speeds commenters believe would be best.
The concept of speed limiters on heavy trucks is supported by safety advocacy groups and the American Trucking Associations, although the preferred details differ.
On the other hand, the Owner-Operator Independent Drivers Association has long argued against speed limiters, on the grounds that differentials in speed “increase interactions between vehicles, which increases the likelihood of crashes.”
In reality, many trucks on the road today are speed-limited by their fleet owners for both fuel-saving and safety benefits. In its proposal, the agencies cite a 2012 FMCSA study of 15,000 crashes that analyzed 20 such fleets. Trucks using speed limiters had a ratio of 1.6 crashes per 100 trucks per year, while those without had a ratio of 2.9.
Speed limiters are already a reality in other parts of the world, including Ontario and Quebec (105 kilometers per hour, or about 65 mph), Japan (90 kph/56mph), Australia (100 kph/62 mph, lower for road trains) and the European Union (100 kph/62 mph).
I’ve been on highways in Germany, where the trucks are speed-limited but in many rural areas of the autobahn there’s no speed limit for cars. Plenty of opportunity for big speed differentials there. But trucks stay in the right lane, and cars don’t linger in the left lane unless they’re passing.
On the other hand, Great Britain restricted trucks to 40 mph on two-lane highways until 2014, while cars could travel 60 mph. But faster passenger cars crashing while trying to pass the slower trucks led to that being upped to 50 mph, according to the Christian Science Monitor.
You might see this as an argument supporting the idea that slower trucks are unsafe. But that was a 20-mph differential on two-lane roads. Though some states have upped speed limits to 80 (85 on some stretches in Texas), these are generally for rural Interstates, not two-lane highways where passing a slower truck could involve encountering oncoming traffic.
Another objection we’ve heard to mandatory speed limiters is that the majority of crashes are caused by the passenger vehicles, not by heavy trucks. This is a bit akin to a bigger brother arguing, “But he started it!” when parents punish him for fighting with his little brother. Doesn’t matter. You’re bigger, which means it’s not a fair match.
There’s no doubt a speed limiter rule will have repercussions. It will tighten capacity and exacerbate the driver shortage. The agencies acknowledge in their proposal that “in order to compensate for the increased travel time, trucking … companies would need to require current operators drive longer hours (within hours of service limits), hire additional operators, and use team-driving strategies in some cases.” Smaller companies and owner-operators will be the hardest hit. But the trucking companies already operating with speed limiters (and they’re not all mega-fleets) show it can be done successfully.
And most importantly, lives will be saved.

Winter roadway “pileups” aren’t one crash — they’re a chain reaction. Here’s what triggers them, how truck drivers can spot the danger early, and what to do if you're suddenly trapped in the mess.
Read More →
The long-awaited registration system promises a single portal — and tighter fraud controls.
Read More →
Heavy Duty Trucking is searching for forward-looking leaders at trucking fleets as nominations for HDT’s Truck Fleet Innovators 2026. Deadline is May 15.
Read More →
Detroit’s next-generation ABA6 safety system adds cross-traffic detection and enhanced side guard assist with left-turn protection, targeting high-risk urban scenarios.
Read More →
The American Transportation Research Institute will examine driver coaching, regulatory impacts — including the "Beyond Compliance" concept —and weather disruptions that shape trucking operations.
Read More →
New requirements add firm deadlines and independent review steps, addressing long-standing complaints about inconsistent rulings and slow response times.
Read More →
Five states still aren't ready to accept commercial driver medical exam information directly from the medical examiner's registry.
Read More →
Heavy Duty Trucking's Top 20 Products awards recognize the best new products and technologies. Check out the award presentations at the 2026 Technology & Maintenance Council annual meeting.
Read More →
The Detroit® Gen 6 engine platform proves that real progress doesn’t require a complete redesign. Built on 20 years of trusted technology, these engines are designed for efficiency, stronger performance, and greater reliability than before. And they do it all while complying with 2027 EPA standards on every mile.
Read More →
Aperia Technologies introduced a new automatic tire inflation system for steer axles and a partnership with Fontaine Fifth Wheel to integrate coupling status into its Halo Connect platform.
Read More →