Heavy Duty Trucking Logo
MenuMENU
SearchSEARCH

Volvo I-Shift Dual Clutch: Smooth Operator

Volvo Truck claims to be first in the world to launch a dual-clutch automated mechanical transmission in heavy trucks. HDT European Editor Sven-Erik Lindstrand takes it for a spin.

December 23, 2014
Volvo I-Shift Dual Clutch: Smooth Operator

European truck editors tried out the new transmissions on demanding hills in Spain. Photo: Volvo Trucks

3 min to read


European truck editors tried out the new transmissions on demanding hills in Spain. Photo: Volvo Trucks

Volvo Truck claims to be first in the world to launch a dual-clutch automated mechanical transmission in heavy trucks, and to this reporter’s knowledge, that is correct. Deliveries of the I-Shift Dual Clutch started in Europe this fall. There's no official word yet if they will be available in the U.S., but it's seen as likely by many in the industry.

Ad Loading...

The two Volvo I-Shifts are similar mechanically, but to the driver they operate much differently.

Ad Loading...

As a concept, dual clutch transmissions appeared in the 1980s in auto rallying and racing. Some European cars now offer them, and Eaton recently introduced a dual-clutch transmission for medium-duty trucks.

The current I-Shift automated manual, with a single clutch, goes back to 2002 in Europe and 2005 in the U.S. About 95% of Volvo's sales of heavy trucks in Europe last year included the I-Shift, and in the U.S. it's now in 74% of Volvo heavy trucks.

The two Volvo I-Shifts are similar mechanically, but to the driver they operate much differently.

I-Shift Dual Clutch can basically be described as two parallel connected gearboxes in one housing. One gearbox contains the even gears and the other has the uneven gears. When one gear is active, the next gear is pre-selected in the second unit. When shifting changes from the first gearbox, the other is poked in. This provides ratio changing without any disruption in power or speed.

The I-Shift Dual Clutch has two input shafts, one located inside the other, and the two clutches. This allows two gears to be engaged simultaneously. Which of the gears that is activated is determined by which clutch is engaged.

Ad Loading...

Volvo’s I-Shift Dual Clutch weighs 222 pounds more and is 4.72 inches longer than the single-clutch I-Shift.

Demanding driving

Volvo showed the I-Shift Dual Clutch to the European press corps recently in south-coastal Spain. We drove almost 300 kilometers (about 180 miles) using 12 vehicles. All were typical European 4x2 tractors with three-axle semi-trailers, loaded to 40 metric tons or 90,000 pounds GCW. Some were equipped with Dual Clutch I-Shifts, while others had the regular single-clutch I-Shift.

  The reason for choosing this part of Europe was the demanding, long and steep ascents and descents of up to 7 and 8 percent. One 65-kilometer (40-mile) leg started at sea level, rising to 916 meters (2,005 feet).

I became especially fond of a FH13-liter with 500-hp engine and 2500 Nm (1844 lb-ft) of torque equipped with the Dual Clutch. It took off almost like a bullet and changed gears fast and without any interruptions. One could only hear, not feel, most gear changes.

Volvo’s I-Shift Dual Clutch weighs 222 pounds more and is 4.72 inches longer than the single-clutch I-Shift. Photo: Volvo Trucks

Like a regular I-Shift, the new transmission skips some gears whenever possible, and makes only one small pause, during a range shift between 6th and 7th gear. Gear changes were made at low rpms, but revs did not drop during gear shifting. Low engine speed gave an extra comfortable setting in an already quiet cab. Volvo says fuel consumption does not exceed a "normal" I-Shift.

Ad Loading...

In the long and steep downhills, the transmission shifted down more quickly and more often than otherwise, due to the activated engine brake and retarder. This is controlled by the cruise control, where the desired maximum speed is set. The Volvo cruise control switches are on the left side on the steering wheel, and prompting slower or faster set speeds is done with a superb thumb switch.

It is amazing how quickly one can lose previous frames of reference. After time in a truck with an I-Shift Dual Clutch, an otherwise distinguished and popular long-haul FH 13 with a 460-hp engine and a single-clutch I-Shift felt far weaker with its slower gear changes.

Subscribe to Our Newsletter

More Equipment

Diagram of trailer tandem slider suspension
Equipmentby Deborah LockridgeMarch 19, 2026

SAF-Holland Redesigns Suspension Slider to Save Weight in On-Highway Trailers

SAF-Holland reengineered the UltraLite40 Slider for the ULX40 Mechanical Sliding Suspension and Axle System to reduce weight, improve durability, extend trailer life, and increase payload efficiency.

Read More →
Magnus Koeck, Volvo Trucks North America.
Equipmentby Jack RobertsMarch 18, 2026

Volvo Teases Next-Gen VNX as Platform Expansion Continues at TMC

Volvo Trucks North America highlighted new connectivity, safety tech and production investments at TMC. The OEM also signaled that a new heavy-haul flagship tractor is coming soon.

Read More →
Back of truck cab showing air and electrical line connections
Equipmentby Deborah LockridgeMarch 16, 2026

SAF-Holland Introduces SmartSto System for Safer Tractor-Trailer Uncoupling

The system combines a fifth-wheel air release with stowage for air and electrical connections, helping prevent damage and reducing driver injury risk.

Read More →
Ad Loading...
Diagram of SAF Holland BrakeSight
EquipmentMarch 16, 2026

SAF-Holland’s BrakeSight Aims to Take the Guesswork Out of Air Disc Brake Maintenance

New Haldex sensor technology from SAF-Holland integrates with telematics systems to give fleets continuous insight into air disc brake condition.

Read More →
Solar panels on top of a red Class 8 truck sleeper cab
Equipmentby Deborah LockridgeMarch 15, 2026

Vanair Introduces Solar, Battery Power Ecosystem for Class 8 Trucks

The company’s expanded EPEQ ecosystem includes flexible solar panels, lithium batteries, hydraulic power systems, and a portable fast charger for electric trucks.

Read More →
Phillips Connect Smart Trailer technology.
Equipmentby Jack RobertsMarch 15, 2026

Phillips Connect Expands Smart Trailer Platform with New Safety, Cargo and Equipment Intelligence

Phillips Connect Smart Trailer enhancements give fleets deeper operational insights from trailers -- even when another provider supplies basic GPS tracking.

Read More →
Ad Loading...
Accuride ProShield XGT.
Equipmentby Jack RobertsMarch 15, 2026

Accuride Unveils ProShield XGT Aluminum Wheel Coating at TMC

Accuride’s patent-pending surface-coating technology targets filiform corrosion and promises easier cleaning, longer-lasting gloss, and greater durability for aluminum truck wheels.

Read More →
Valvoline at TMC 2026.
Equipmentby Jack RobertsMarch 15, 2026

Valvoline, Cummins Extend X15 Oil Drain Intervals to 100,000 Miles

New approval for Valvoline Premium Blue One Solution Gen2 allows fleets running Cummins X15 engines to extend oil drain intervals by up to 25,000 miles -- reaching intervals as high as 100,000 miles.

Read More →
Al Anderson, Peterson.
Equipmentby Jack RobertsMarch 15, 2026

A New Approach to Lighting Reliability

Peterson’s Genesis lighting system and repairable J560 connector target two persistent fleet problems: LED light failures and costly electrical connector downtime.

Read More →
Ad Loading...
Illustration of a row of trucks with question marks overlaid
EquipmentMarch 12, 2026

The Hidden Cost of Delaying Truck Replacement

Many fleets extended truck replacement cycles during recent market disruptions. But holding equipment too long can lead to higher repair costs, longer downtime, and new operational risks.

Read More →