Stertil-Koni has developed the Rolling Pit Jack, a free-standing rolling pit jack with a capacity of 30,000 pounds that is specifically designed to safely operate on the pit floor of heavy-duty workshops - entirely independent of upper pit edges.
Lifting is done by an air driven, fully hydraulic pump actuated by tandem foot pedals. One pedal quickly raises the piston to be in contact with the vehicle being lifted while the other allows precision lifting in small increments.
Lifting is done by an air driven, fully hydraulic pump actuated by tandem foot pedals. One pedal quickly raises the piston to be in contact with the vehicle being lifted while the other allows precision lifting in small increments.


Lifting is done by an air driven, fully hydraulic pump actuated by tandem foot pedals. One pedal quickly raises the piston to be in contact with the vehicle being lifted while the other allows precision lifting in small increments. The service technician is hands-free to work on the vehicle or operate other tools.

In addition, the jack frame is supported on wheels for easy relocation within the pit, but the frame immediately settles to the floor when a load is applied. Finally, the jack is designed to draw the piston back quickly and easily, even when unloaded, to ensure that the vehicle does not contact the jack while driving over the pit.

In terms of durability, both the piston rod and the pump piston are hard-chrome plated for protection against corrosion and water. Also, the carriage of the Rolling Pit Jack is automatically lowered when handling loads of 1 ton or more and the integral locking brakes guarantee stability. Two models are available. The FPJ-150-F is fitted with a fixed vertical piston, and the FPJ-150-U has a vertical piston that moves side to side.

For more information, go to www.stertil-koni.com/.
0 Comments