Municipal trucks have to work all year round, and they work especially hard when heavy snow falls. "Plow trucks" keep motorized civilization moving, and for this task and others that demand strong specifications, Kenworth has the T470.
This Kenworth T470, set up with a dump bed and plow mount, aims at municipal and construction customers. Photo by Tom Berg
This Kenworth T470, set up with a dump bed and plow mount, aims at municipal and construction customers. Photo by Tom Berg


This is a recently introduced medium-heavy model that, along with the even more recent T440, bridges the gap between the Class 7 T370 and KW's Class 8 T800.

Our bright-blue test truck was a "heavy 7" vehicle that's set up for snow plowing and salting in the winter and hauling sand, gravel, stone and dirt during the summer construction season.

Compared to the strictly medium-duty T370, the T470 has heavier frame, axle and suspension options that more resemble what you can have the factory install on a T800. A base T470 is a Class 7 truck rated at 33,000 pounds, just a pound shy of Class 8. Most 470s will be rated at over 33,000, and with midrange-size engines they're what many in the industry call Baby 8s. Two engines are available: Paccar's 8.3-liter PX-8 (otherwise known as the Cummins ISC), and Cummins' heavy duty 8.9-liter ISL, which is what this truck had.

The test truck

Our test truck's stated gross vehicle weight rating was 66,000 pounds, as it had 46,000-pound tandem rear axles and a beefy 20,000-pound rear-set steer axle designed to take the weight of any payload plus that of a 10-foot steel snow plow. The T470's standard fixed grille stays vertical as the hood tilts down around a plow's hoist hanger and pump (one of the differences between it and the new T440, whose grille tilts with the hood).

This 470's frame had full-length inserts, though available bigger rails can be used instead, and was extended to accommodate a front-engine power take-off to operate the plow. GVW would be higher if it had a pusher axle, another factory option with the T470, though then the steer axle would be of lesser capacity as the 470's top GVW rating is 68,000 pounds.

Like other KW conventionals, the T470 has a stout aluminum cab with doors hung on piano hinges, large windows, a "real truck" instrument panel and air-ride driver's seat. Almost nothing in it looks "automotive" except the steering wheel, but its smoothly contoured spokes provide a place to comfortably rest your hands, and in a frontal wreck the wheel won't pierce your chest the way an old-fashioned straight-spoke and small-hub wheel might (but you wear your lap-and-shoulder belt anyway, y'hear?). The steering column tilts and telescopes so you can get the wheel just right. The cab is narrower than some competitors offer, but in a work truck how often do you need to carry another guy?

On this trip I did. Jared White, Kenworth's Chicago-based Great Lakes regional sales manager, met me at KW's assembly plant in Chillicothe, Ohio, on a late-summer morning and briefed me on the test truck, which had been upfitted with the dump bed and other equipment at Beau-Roc over in Illinois. It had burly suspensions over its Dana Spicer axles, including 22,000-pound taperleafs on the steer and a 46,000-pound Chalmers walking-beam type on the tandem.

On the road

Even with several tons of crushed stone in the bed, the truck got a-bouncin' on a stretch of bowed concrete on our route over state and U.S. highways to Athens, about an hour east of "Chilli." But the ride otherwise was orderly, the steering rather precise and noise levels low. We cruised through the campus of Ohio University. Here I remarked that the view through the big windshield and side windows and over the sloped hood allowed me to spot everything easily. The truck turned rather sharply for having big "duplex" tires up front, and I could go from curb lane to curb lane in a right turn at a street corner.

Early in the run I had to look to see where the brake pedal was so I wouldn't miss it with my right foot. While waiting at a red light in Athens, I noticed that I had to press down really hard on the pedal to overcome the torque coursing through the Allison automatic, so I punched it into Neutral. My legs were at an almost 90-degree angle because the smallish cab forced the seat close to the controls, same as in a T170 that I drove last year (grumble-grumble).

But wait - this cab had the optional 6-inch extension, and I realized that I could slide the seat farther back (duh...). When I did, I could stretch my legs more, so could bring my body weight to bear on the brake pedal, which now also seemed better positioned on the floor. Moving the seat back made the seating position about 1,000 percent more comfortable, and I'm not tall.

I'd advise KW customers to spec the Extended Cab in any order for a daycab truck or tractor (though it's not available in lighter T-series trucks).

Under the hood

That strong low-end torque, as much as 1,150 pounds-feet of it, came from a 345-horsepower version of the Cummins ISL (a 365/1,250 rating is also available). It fit nicely under the hood and supplies plenty of power for whatever work a truck like this will do.

The 6-speed Allison 3000 RDS did much of the driving work and would've eased plowing snow or spreading gravel, had I been told to tackle such tasks. Those are among the reasons most municipal fleet managers went to Allisons years ago.

How many of these budget-constrained managers will consider a "pricey" Kenworth? Some will see value and long life in the corrosion-resistant aluminum cab and other premium manufacturing details, and argue for them in discussions with elected officials who dole out their limited tax revenues. Besides, everyone's dealing these days, and it could be that municipal buyers will be surprised at how competitive KW's pricing might be. Indeed, KW has already reported some orders for the T470, and some will be painted "muni" red, yellow or orange.

From the December 2009 issue of Heavy Duty Trucking.

About the author
Tom Berg

Tom Berg

Former Senior Contributing Editor

Journalist since 1965, truck writer and editor since 1978.

View Bio
0 Comments