Installing and using propane autogas refueling infrastructure is simple and easy and fleets appreciate the advancements in infrastructure equipment. An advanced propane autogas dispenser can be installed and function just like a gasoline or diesel dispenser, which helps drivers transition easily.
The necessary equipment does not require excessive space; the average footprint of an autogas refueling station is 300 square feet.
In addition, propane autogas dispensing is a closed-loop system and new technology allows for almost zero fugitive emission, eliminating additional safety concerns.
Propane Autogas Refueling Steps
- Turn off the vehicle. Know and follow fueling site/fleet Personal Protective Equipment (PPE) requirements.
- Check to make sure that there are no open flames or other ignition sources within 25 feet of the vehicle.
- Open the fuel door.
- Unscrew the dust cap from the vehicle fill valve.
- Check the seal, gasket or O-ring for tears, breaks or cuts. If damaged/missing, do not dispense until replaced.
- Remove the nozzle from the dispenser.
- For acme refueling nozzles, screw the nozzle firmly on the vehicle fill valve, ensuring a proper connection. An improper connection could cause a leak or malfunction.For quick-connect (K-15) nozzles, push the nozzle over the fill valve and ensure it is engaged; the nozzle will not fill the vehicle if it is not properly attached.
- Activate the dispenser. When the fuel level in the tank reaches 80% storage capacity, the fuel flow will automatically stop.
- When you first release the handle and/or when you unscrew the nozzle, a short, small release of autogas vapor may occur.
- After unscrewing/releasing the nozzle:
- Return the nozzle to the dispenser
- Replace the cap on the vehicle fill valve
- Shut the fuel fill door.
- If applicable, record refueling information.
Web-Based Software for the Win
Advanced propane autogas dispensers, like the Superior Energy Systems PRO-Vend 2000/2500 units, are fully integrated and customizable web-based units. These dispensers track key data like driver and vehicle identification, vehicle mileage, and gallons pumped for a virtually unlimited number of vehicles, drivers, and customers.
All fleet information can be accessed by the fleet in real time and they can create customizable reports, without the need to purchase and install separate technology. The dispenser software can be updated remotely, through a cloud-based management system, removing the need for multiple site visits and ensuring the most up to date technology.
Software system instructions are provided by the manufacturer.
Maintaining Propane Autogas Skids & Dispensers
Propane autogas stations require little maintenance which with training, can typically be handled by the fleet.
Maintenance needs include:
- Hoses: visual inspection; replace if worn or leaking
- Nozzle (acme or K-15): Lubricate the nozzle using a light lubricant
- Pull-away: lubricate swivel and exercise to test break-away
- Emergency stop button: test to make sure valves close and power is disconnected when emergency buttons/pull cables are used
- Cabinet: wash outside of cabinet (do not use high pressure water); paint if necessary
- Valves (skid): exercise valves; this includes nitrogen emergency stop buttons and pull cables attached to internal valves on the tank
- Pumps (skid): see pump manufacturers recommendations (not all pumps require grease)
- Nozzle (acme style): clear internal strainer using the recommended intervals or when cleaning the main strainer in the piping system
- Strainers (skid): check strainers for buildup
- As needed:
- Computer screen: clean screen with cotton cloth and mild detergent (do not use ammonia-based products); replace screen protector if needed
- Pumps/motor (skid): make sure to clean snow build up around pump and motor to avoid overheating and possible damage
- Steel skid (skid): paint to prevent corrosion.
Regulation and code advancements in propane autogas technology continue to progress, like the recent move by NFPA 58, which now mandates the K-15, quick-connect style inlet on vehicles as an industry standard.
The K-15 nozzle allows for nearly zero escaped emissions at release and is extremely user-friendly – like a gasoline or diesel dispenser. The new nozzle technology also eliminates the requirement for PPE. There have also been advancements and adaptations made for public refueling – making is easier for fleets to offer public use of their autogas dispenser, should they wish.
Regardless of advancements and innovation, safety remains top priority when utilizing any refueling system, so it is critical that all users are made aware of those procedures and safety habits.
Safe Dispensing Habits
- Keep the dispensing area clear except for objects necessary for dispensing.
- Vehicle ignition must be off before dispensing autogas.
- All ignition sources must be a minimum of 25 feet away from the refueling site.
- Do not strike matches or light a cigarette lighter.
- Do not smoke.
- Avoid sources of static electricity.
- Do not use cell phones.
- Report any propane leaks immediately.
- Follow fleet PPE requirements.
- Make sure all employees are trained in the safe practices and handling of propane autogas. They should be familiar with the operation, maintenance, and safety/emergency features of autogas dispensing systems. Education and safety resources are available from the Propane Education and Research Council.
About the Author: Crystelle Marley is the marketing director for Superior Energy Systems.This article was authored and edited according to WT editorial standards and style to provide useful information to our readers. Opinions expressed may not reflect that of WT.
Originally posted on Work Truck Online