NHTSA's Stability Control Proposal Gets First Public Airing
July 24, 2012
At a hearing hosted by NHTSA yesterday, truck and equipment suppliers uniformly applauded the agency's proposal to require electronic stability control systems, but warned that the certification method the agency is considering will create more problems than it solves.
American Trucking Associations likes stability control technology but is not so keen on the agency's choice of ESC versus roll stability control.
Both systems detect the risk of rollover or instability and slow the vehicle by cutting back the throttle and applying the brakes automatically. But RSC is triggered only by roll instability, while ESC reacts to both roll instability and yaw instability, such as a skid that could lead to a jackknife.
Ted Scott, director of engineering at ATA, said the rule needs to consider the diversity of the industry.
"One size does not fit all," he said. ESC is more effective than RSC, but the difference is not enough to justify going with the ESC mandate, he said.
"The point is that such a diverse industry needs standards that provide flexibility."
But ATA does not speak for all carriers.
Jim Burg, president of steel hauler James Burg Trucking, has ESC systems in a half-dozen new tractors and has RSC on 10 trailers. He sees ESC as the common-sense approach.
He prefers ESC to RSC on his power units because it provides both roll and directional control.
"I was convinced to purchase ESC technology after watching a 10-minute video demonstration taped on a snow-covered test track in Michigan's Upper Peninsula," he said. "I have driven over 1.2 million miles in a commercial motor vehicle and immediately recognized the value ESC could bring in unpredictable circumstances."
The hearing was the beginning of the public phase of the agency's rulemaking process. The agency posted the proposed rule last May and will accept comments until August 21.
The rule, aimed at vehicles rated 26,000 pounds or more, would be phased in over two to four years after it goes through public comment and becomes final, a process that probably will take a year or more. The Certification Concern
Manufacturing interests at the hearing unanimously said that the agency needs to reconsider its approach to certifying ESC systems.
The agency is proposing a "sine with dwell" procedure that would put trucks through high-speed maneuvers that can only be done at one facility in the country, said Tim Blubaugh of the Truck and Engine Manufacturers Association.
The agency is borrowing this procedure from its testing of stability control systems on cars, but it won't work with trucks, he said.
It requires expensive and complicated new equipment on the truck, and the maneuvering that's required could damage the truck. Moreover, it does not reflect how trucks have to maneuver on the highway, he said.
He warned that the agency's certification approach could jeopardize the entire rule.
"The sine with dwell
certification test would impose enormous resource demands on heavy-duty truck manufacturers for no purpose, and would make the rule impractical to implement," he said.
Manufacturers are working on alternative certification procedures that they intend to recommend to the agency, said Blubaugh.
A number of manufacturers testified in the same vein, including Navistar, Volvo, Daimler Trucks North America, Meritor Wabco, Bendix Commercial Vehicle Systems and the Heavy Duty Brake Manufacturers Council.
Also testifying in support of the proposal were Rep. Betty Sutton, D-Ohio, whose district includes the headquarters of Bendix, and John Hill, former chief of the Federal Motor Carrier Safety Administration and a long-time advocate of advanced safety technologies.