Is this a case of win-win? Do the new regulations limiting greenhouse gas emissions help both the environment and truck operators’ bottom lines? So it seems.
Buy Print Issue
By Jim Beach
Whether you operate one truck or 1,000, monitoring and managing costs is one of your most important tasks. Fleets have used technology to help them control costs for some time, but the latest third- or fourth-generation systems are capable of generating tremendous amounts of information fleets can put to use.
By Tom Berg
What’ll it be, buddy? New or used? Buy or lease? A salesperson could throw those questions at a prospective buyer and get a combination of answers, and none of them would be absolutely wrong. Because like everything in trucking, “it depends.”
By Denise Rondini
While remanufactured components have been around for quite some time, not every one is clear on exactly what they are. Yet they could be a valuable component of your parts strategy.
Over the Christmas holidays, the Salvation Army’s bell ringers raise money to help fund its disaster and human-relief efforts. But considerable dollars also come from its daily pick-ups of donated household and office goods that are delivered to warehouses for sorting and refurbishment. These items are then resold in its Family Stores. For this, SA employs a fleet of medium-duty trucks.
By Tom Berg and Oliver Patton
Truck owners and manufacturers share responsibility for compliance with new limits on carbon dioxide emissions and fuel economy.
By Jim Park
Back in 1984, the Occupational Safety and Health Administration issued a regulation requiring that truck wheels be stripped of rust and debris before mounting a tire. Easier said than done, the industry moaned at the time. Labor was less costly then, but wire brushes and elbow grease weren’t going to cut it.
By Kate Harlow
As fleets everywhere work on cutting fuel expenses, one strategy is shedding pounds anywhere they can stand to lose them. “Most fleets that are fuel conscientious are weight conscientious. The heavier the unit weighs, the higher cost per mile to operate it."
By Edwin Zalewski, J.J. Keller & Associates
Drivers and other employees who get injured at work may be temporarily unable to perform their jobs. If an injury prevents an employee from working, you might wonder what steps you need to take to get the employee back on the job, or how much time must pass before you can hire a replacement.
Dual-fuel glider kits are a relatively new alternative for fleets looking to tap into the benefits of natural gas but at less cost than buying a new, dedicated NG vehicle. A glider is a new truck without some powertrain components. Shops in the field add rebuilt or remanufactured engines, transmissions and rear axles.
By Rolf Lockwood, Executive Contributing Editor
Racing cars in the top echelons of motorsports have tons of horsepower. But could they pull a load of firewood out of the bush? No way. They can barely get themselves moving from a dead stop.
We offer e-newsletters that deliver targeted news and information for the entire fleet industry.
The expert, Shawn Whitacre from Chevron Delo, will answer your questions
The expert, Steve Carlson from Xantrex, will answer your questions
The expert, Brian Fletcher from Eaton, will answer your questions
On the Spot: Drive the Future With Volvo's SuperTruck [Video]
Highlights From ATA Management Conference & Exhibition [Video]
Navistar's Las Vegas LT Series Launch Presentation [Video]
Test Drive Preview: Freightliner's 2018 Cascadia [Video]
App Helps Truckers Report Accidents
Charger Keeps Batteries Topped Off in Winter
Tool Designed to Remove Tie Rods and Ball Joints
Driver Wellness Courses Address 3 Key Concerns