Phillips Industries

1  -  20  of  27

October 12, 2015

Permalite XT Features Brighter Illumination

Phillips Industries’ Permalite 4-inch Round Stop-Tail-Turn Lights use 9 diodes for brighter illumination.

September 9, 2015

Phillips Air Combination Assemblies Create Organized Package

Phillips Industries 2-IN-1 Air Combination Assemblies are designed to spiral wrap the emergency and service air lines together into a clean and organized package.

June 24, 2015

Air-Defense System Filters Debris For Air Brakes

Phillips Industries has introduced the Air-Defense System trailer brake in-line filtration system designed to trap debris before entering air lines or brake components.

June 9, 2015

Phillips Industries Raises Money to Support Wyakin Warrior Foundation

Phillips Industries recently raised and contributed over $30,000 to the Wyakin Warrior Foundation, an organization that helps severely wounded, injured, or ill post 9/11 veterans.

May 14, 2015

Phillips Releases Compact Trailer Wiring Management System

Phillips Industries released a compact and durable Sta-Dry trailer wire management system called Volt-Box.

March 23, 2015

Light Monitoring System Cuts Down on Violations

The Phillips Industries Lite-Sentry is a trailer-chassis light monitoring system that alerts a driver when a light has gone out on a trailer.

January 29, 2015

Phillips Industries Rep Elected to HDA Hall of Fame

LAS VEGAS -- Pete Joy, vice president of sales and marketing for Phillips Industries, was elected into the Heavy Duty Aftermarket Hall of Fame on the opening day of Heavy Duty Aftermarket Week.

December 9, 2014

Phillips Industries Expands Electrical Harness Division

Phillips Industries expanded the capabilities of its Electrical Harness Division at its new facility in Arteaga, Mexico. The new facility will increase the division’s footprint by 25%.

December 2, 2014

PC2-rated Single-LED Lamps

New ¾-inch Permalite XT round LED marker/clearance lights are PC2 rated, meaning they are visible from up to a 90-degree angle. They are meant for vehicles over 80 inches wide.

October 14, 2014

Phillips Pigtail Harnesses Sealed for Protection

Phillips Industries released three new trailer harness pigtail products that are sealed to keep out moisture and contaminant. There are separate harnesses for stop-tail-turn, mid-turn and marker/clearance lights.

August 26, 2014

Phillips Introduces Liftgate Sockets With Swivel Technology

Phillips Industries has introduced new single and dual pole liftgate sockets with swivel and automatic disconnect features.

August 19, 2014

Phillips Announces Liftgate Dual Pole Kit

Philips Industries is now offering a liftgate dual pole installation and conversion kit to help fleets that are seeing an increasing need to have a ground return system versus a chassis ground system for the supplemental power requirements of liftgates.

July 30, 2014

Phillips Industries' National OEM Truck Sales Manager Retires

Phillips Industries announced the retirement of Steve Davis, national OEM truck sales manager, effective July 2014.

June 30, 2014

Thin, Durable Trailer LEDs from Phillips Now Available to Aftermarket

A line of thin, durable lamps initially introduced at the Technology & Maintenance Council meeting this spring by Phillips Industries is now available in the aftermarket.

May 14, 2014

Phillips Industries Hires Director of Engineering

Phillips Industries has hired Dave Lajeunesse as director of engineering. He will be responsible for all Phillips engineering protocol, research and development and customer relationships.

March 10, 2014

You Don’t Need to Hammer on These Thin LEDs to Appreciate a Bright Idea

Ever hear of Innotec? Neither did senior editor Tom Berg. Now he sees what it does, and so will you.

January 31, 2014

Bob Phillips Inducted Into HD Hall of Fame

Bob Phillips, chairman and CEO of Phillips Industries, was inducted into the Heavy Duty Aftermarket Hall of Fame during Heavy Duty Aftermarket Week.

January 22, 2014

Phillips Industries Introduces 4-in-1 Combination Electrical and Air Assemblies

Phillips Industries has introduced new 4-in-1 combination electrical and air assemblies with liftgate and auxiliary cables with multiple plug and seal options. The new Phillips 4-in-1 spiral wrapped assemblies with hanging clamp and clip keep cables kink free and organized for a clean look.

November 18, 2013

Rob Phillips Takes Helm of Phillips Industries

Phillips Industries, a manufacturer of advanced electrical and air brake interface equipment for commercial vehicles, has appointed Rob Phillips as its new president and COO.

August 22, 2013

Phillips Permalite XB Interior Lamp for Trailers Is Now 30% Brighter

Phillips Industries has increased the brightness of its Permalite XB interior trailer dome lamp by 30%, which makes the entire trailer interior well lit with contents clearly visible, increasing efficiency in loading and unloading operations.



We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



The expert, Mark Betner from CITGO, will answer your questions

View All



The expert, Rence Oliphant from Hendrickson, will answer your questions

View All