Phillips Industries

1  -  20  of  31

July 28, 2016

Phillips Industries Taps Tom Begin as Tech Leader

Phillips Industries has appointed Thomas “Tom” Begin to fill the new role of director of innovation and emerging technologies, effective August 1.

April 22, 2016

STA-Charge Battery Charger Offers Faster Rate of Charge

The Phillips Industries STA-Charge Battery Charger is a battery charger for 12-volt liftgate/load batteries designed to improve battery efficiency.

April 8, 2016

Trailer Power Management System Pulls From Multiple Sources

Phillips Industries has introduced the Permalogic Smart-Charge trailer power management system for liftgate and auxiliary battery banks.

February 29, 2016

Phillips Develops New Dual-Pole Plug and Socket

Phillips Industries has developed an auxiliary vertical dual-pole plug and socket that meets the new SAE J3082 standards for high-current connections between a tractor and trailer.

October 12, 2015

Permalite XT Features Brighter Illumination

Phillips Industries’ Permalite 4-inch Round Stop-Tail-Turn Lights use 9 diodes for brighter illumination.

September 9, 2015

Phillips Air Combination Assemblies Create Organized Package

Phillips Industries 2-IN-1 Air Combination Assemblies are designed to spiral wrap the emergency and service air lines together into a clean and organized package.

June 24, 2015

Air-Defense System Filters Debris For Air Brakes

Phillips Industries has introduced the Air-Defense System trailer brake in-line filtration system designed to trap debris before entering air lines or brake components.

June 9, 2015

Phillips Industries Raises Money to Support Wyakin Warrior Foundation

Phillips Industries recently raised and contributed over $30,000 to the Wyakin Warrior Foundation, an organization that helps severely wounded, injured, or ill post 9/11 veterans.

May 14, 2015

Phillips Releases Compact Trailer Wiring Management System

Phillips Industries released a compact and durable Sta-Dry trailer wire management system called Volt-Box.

March 23, 2015

Light Monitoring System Cuts Down on Violations

The Phillips Industries Lite-Sentry is a trailer-chassis light monitoring system that alerts a driver when a light has gone out on a trailer.

January 29, 2015

Phillips Industries Rep Elected to HDA Hall of Fame

LAS VEGAS -- Pete Joy, vice president of sales and marketing for Phillips Industries, was elected into the Heavy Duty Aftermarket Hall of Fame on the opening day of Heavy Duty Aftermarket Week.

December 9, 2014

Phillips Industries Expands Electrical Harness Division

Phillips Industries expanded the capabilities of its Electrical Harness Division at its new facility in Arteaga, Mexico. The new facility will increase the division’s footprint by 25%.

December 2, 2014

PC2-rated Single-LED Lamps

New ¾-inch Permalite XT round LED marker/clearance lights are PC2 rated, meaning they are visible from up to a 90-degree angle. They are meant for vehicles over 80 inches wide.

October 14, 2014

Phillips Pigtail Harnesses Sealed for Protection

Phillips Industries released three new trailer harness pigtail products that are sealed to keep out moisture and contaminant. There are separate harnesses for stop-tail-turn, mid-turn and marker/clearance lights.

August 26, 2014

Phillips Introduces Liftgate Sockets With Swivel Technology

Phillips Industries has introduced new single and dual pole liftgate sockets with swivel and automatic disconnect features.

August 19, 2014

Phillips Announces Liftgate Dual Pole Kit

Philips Industries is now offering a liftgate dual pole installation and conversion kit to help fleets that are seeing an increasing need to have a ground return system versus a chassis ground system for the supplemental power requirements of liftgates.

July 30, 2014

Phillips Industries' National OEM Truck Sales Manager Retires

Phillips Industries announced the retirement of Steve Davis, national OEM truck sales manager, effective July 2014.

June 30, 2014

Thin, Durable Trailer LEDs from Phillips Now Available to Aftermarket

A line of thin, durable lamps initially introduced at the Technology & Maintenance Council meeting this spring by Phillips Industries is now available in the aftermarket.

May 14, 2014

Phillips Industries Hires Director of Engineering

Phillips Industries has hired Dave Lajeunesse as director of engineering. He will be responsible for all Phillips engineering protocol, research and development and customer relationships.

March 10, 2014

You Don’t Need to Hammer on These Thin LEDs to Appreciate a Bright Idea

Ever hear of Innotec? Neither did senior editor Tom Berg. Now he sees what it does, and so will you.

Previous||12||

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.

GotQuestions?

Sleeper Cab Power Experts

The expert, Steve Carlson from Xantrex, will answer your questions

View All

GotQuestions?

Transmissions

The expert, Brian Fletcher from Eaton, will answer your questions

View All