Safety & Compliance

Maintenance

1  -  4  of  4

September 2014, TruckingInfo.com - Department

What’s Going on with my Brakes?

Front-axle brakes designed to meet reduced stopping distance rules may not run hot enough under normal driving conditions.

By Jim Park

When we started looking at wheel-end issues for this month's Tires & Wheels story, we discovered that reduced stopping distance rules have had some unintended consequences.

Tags: Brakes, Regulations, Maintenance

June 2013, TruckingInfo.com - WebXclusive

7 Steps to Safely Lifting Heavy-Duty Work Vehicles

Make certain that all lifts are subject to a regular program of scheduled maintenance.

By Truckinginfo Staff

Stertil-Koni recently announced what its research has shown to be seven key steps that fleets and transit authorities should observe prior to lifting heavy-duty work vehicles in commercial maintenance facilities.

Tags: Maintenance, Safety, In the Shop, Shop Tools, Stertil-Koni

June 2013, TruckingInfo.com - WebXclusive

Tires are Key Component of CSA Inspections

By Truckinginfo Staff

As one of the two biggest non-labor expenses that trucking fleets have, tires require careful maintenance. The Federal Motor Carrier Safety Administration’s Compliance, Safety, Accountability program further underscores the importance of good tire maintenance practices.

Tags: Maintenance, Goodyear, CSA, Tires

February 2013, TruckingInfo.com - WebXclusive

How to Set up a Maintenance Program that Will Keep FMCSA Happy

By Thomas Bray, Editor, J.J. Keller & Associates

Whether you have one truck or 20,000, the FMCSA's maintenance regulations apply to you. The safety and compliance experts at J.J. Keller have tips for owner-operators and small fleets on how to develop a maintenance program that will meet federal standards.

Tags: Maintenance, FMCSA, Owner-Operators

« Previous1Next »

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by


WHEEL ENDS SOLUTIONS

Wheel end expert Jeff Geist from STEMCO will answer your questions
Ask a question

Sponsored by

Magazine