Safety & Compliance

Brakes

1  -  3  of  3

September 2014, TruckingInfo.com - Department

What’s Going on with my Brakes?

Front-axle brakes designed to meet reduced stopping distance rules may not run hot enough under normal driving conditions.

By Jim Park

When we started looking at wheel-end issues for this month's Tires & Wheels story, we discovered that reduced stopping distance rules have had some unintended consequences.

Tags: Brakes, Regulations, Maintenance

September 2014, TruckingInfo.com - WebXclusive

Would Your Brakes Pass Inspection?

Photo: J.J. Keller

By Betty Weiland, J.J. Keller

From September 7-13 – Brake Safety Week – more than 30,000 brake inspections are expected to be conducted. Roadside inspectors will be inspecting brake-system components to identify loose and missing parts; air and hydraulic fluid leaks; worn linings, pads, drums and rotors; and other faulty brake-system components.

Tags: Vehicle Inspection, Brake Safety Week, Brakes, CVSA

July 2014, TruckingInfo.com - Feature

Brake Trends: Drums vs. Discs

By Tom Berg

While drum brakes have been enlarged and strengthened to meet stricter federal stopping distance requirements and are currently used on 90% of heavy trucks, discs are gaining in popularity.

Tags: Brakes, Federal Motor Vehicle Safety Standards, Air Disc Brake, Drum brakes

« Previous1Next »

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by

Magazine