Meritor Wabco announced its independent stability enhancement system for trailers, RSSplus, is now available as a retrofit kit for trailers with applications for both spring and air suspensions.


RSSplus is part of the SmartTrac family of stability control products such as Electronic Stability Control, Roll Stability Control, and Automatic Traction Control offering advanced functions to enhance vehicle stability.

RSSplus retrofit kits are backed by Meritor Wabco's comprehensive warranty of one year/100,000 miles parts and labor. They are available immediately through ArvinMeritor's Commercial Vehicle Aftermarket authorized outlets.

"Mechanical springs are the predominant suspension in several market segments that have shown great interest in rollover mitigation," said Jon Morrison, president and general manager of Meritor Wabco. "These are fleets that want to enhance the value and performance of their existing equipment. Now Meritor Wabco gives them a cost-effective way to apply this technology to trailers already in service no matter what type of suspension they have."

RSSplus is an advanced two-modulator stability system that integrates with the trailer's antilock braking system. It continually calculates the trailer's roll stability threshold based on lateral acceleration (side-to-side movements) and individual wheel speeds. When conditions indicate that a rollover may occur, the system will apply the trailer axle brakes to slow the vehicle and assist the driver in maintaining control of the vehicle.

Meritor Wabco offers different retrofit kits to accommodate a wide range of braking system configurations, including 2-sensor/1-modulator (2S/1M); 2-sensor/2-modulator and 4-sensor/2-modulator (4S/2M); trailers equipped with Meritor Wabco ABS; or trailers with non-Meritor Wabco ABS or no ABS at all.

Installation involves replacing the ABS ECU/valve assembly with the RSSplus ECU valve assembly and mounting an electronic sensor to measure the defection of the suspension springs. If the trailer is equipped with Meritor WABCO ABS, existing wheel-speed sensors and cables can be reused to reduce the installation expense.

A typical retrofit installation of RSSplus for mechanical suspensions takes approximately four to six hours. Meritor WABCO's field service team is available to train and qualify technicians who will perform the installations.

RSSplus for mechanical suspensions functions precisely the same as the version for air suspensions, providing consistency and familiarity for drivers and technicians.

More info: www.arvinmeritor.com
0 Comments