Why Should You Retread Your Tires?

May 2013, - WebXclusive

by Jim Park, Equipment Editor - Also by this author

SHARING TOOLS        | Print Subscribe
You can choose from a wide range of OE and aftermarket tread patters and compounds to optimize tire life or fuel efficiency. EPA now recognizes retreads as fuel efficient tires, so fleets can reuse the same casing for different applications at different wheel positions.
You can choose from a wide range of OE and aftermarket tread patters and compounds to optimize tire life or fuel efficiency. EPA now recognizes retreads as fuel efficient tires, so fleets can reuse the same casing for different applications at different wheel positions.

Retreading tires provides the absolute lowest cost per mile of any tire management strategy. When coupled with other enhanced preventive maintenance measures, a retreaded tire can easily go half a million miles or more, all things being equal.

Matt King, president of King's Tire Service in Bluefield, W.V., a ContiLifeCycle retread dealer, says some of his over-the-road customers are averaging three to four caps in a casing life, depending on the application.

"We suggest the first cap on a name brand casing should be a drive recap, and then go to the trailer tread if the casing comes back again," he says. "Generally speaking, the casing is best used for the application it was in when it was new."

Getting several retreads out of a single casing can reduce overall tire cost by something like 40%, and that should appeal to just about anyone.

If you still need convincing, consider the vastly reduced environmental consequences of using retreaded tires. According to the Tire Retread Information Bureau, it takes approximately 22 gallons of oil to manufacture one new truck tire, but only about seven gallons to produce a tread for a retreading application. I

If you can extend the life of the casing out to two, three or even four retread cycles, you're saving about 50 gallons of oil per wheel position over the life of the truck.

And if that's not enough to convince you, consider that each time a tire is retreaded, there's more warranty applied to the tire. All the major retreaders and many retread shops offer some form of warranty, sometimes prorated, on the tread and the casing down to varying tread depths. That lowers the cost of potential failures, provided the tire is properly maintained.

Ah, you're saying; properly maintained ... That's the rub. Who has the time and resources to chase after retreaded tires?

"Retreaded tires require no additional maintenance compared to a virgin tire," says Tom Bowman, vice president of the commercial tire division of Belle Tire in Allen Park, Michigan, near Detroit. "Any irregularities that would harm a new tire will do the same damage to a retreaded tire. Inflation pressure maintenance is critical, but so it is with new tires, too. If you don't keep the pressure up, the tire – any tire, retread or new – will die a premature and possibly ugly death."

Next page: Trade it Now, or Trade it Later


  1. 1. gary reif [ May 15, 2013 @ 03:46AM ]

    The story reads should last a million miles , but they don't. Save your money and costly downtime and purchase only virgin rubber. The only good thing a worn out tire is good for is starting a brush fire.

  2. 2. Shelley Hughes [ May 20, 2013 @ 11:34AM ]

    Disagree with ya Gary Reif! My husband and I have had GREAT luck with recaps from a place in Kansas City called Mid States Tire and Retread. I think it all depends on where you are getting your work done. We've been in the trucking business for more than 30 years, and yes , we've ran into retread shops that were not worth it, but I have to say we've been with Kevin at Midwest for several years now and have had tremendous luck with his work. He is very particular about the age and quality of casings and has machinery to do close inspections. We've gotten great mileage out of them and proper wear!

  3. 3. Johan Gouws [ September 20, 2013 @ 12:33AM ]

    Did you know that even a new tire get its tread cap after the casing is build? to not retread is money down the drain

  4. 4. Mickalina LaRoche [ October 01, 2014 @ 05:57AM ]

    I have low profile tires that need retreding what do I do how do I go about it

  5. 5. Jason L [ August 05, 2015 @ 03:34PM ]

    @MIckalina LaRoche You should find a well established retread shop. Don't shop simply on price. All the major tire brands have an associated retread system, however they can all retread all casing brands. The better the original casing brand the better results you will get on retreading. Unfortunately Gary, commented above, and is kinda clueless. Yes in todays market you can buy a cheap truck tire for only maybe $50 more than having your tire retreaded but the premium retread will run circles around a cheap chinese new tire insofar as mileage as concerned. What Gary and folks like him do not understand is, a tire is simply a container meant to hold air at very precise pressures for the load carried. ALL tires will fail if under inflated or even over inflated. If your money is important to you, check air pressures frequently and consult a psi chart for your tires and load.


Comment On This Story

Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.


We offer e-newsletters that deliver targeted news and information for the entire fleet industry.


ELDs and Telematics

sponsored by
sponsor logo

Scott Sutarik from Geotab will answer your questions and challenges

View All

Sleeper Cab Power

Steve Carlson from Xantrex will answer your questions and challenges

View All