Maintenance

5 Reasons to Outsource your Tire Maintenance

April 2013, TruckingInfo.com - WebXclusive

by Jim Park, Equipment Editor - Also by this author

SHARING TOOLS        | Print Subscribe
Service providers come to your yard or to remote yards, and do tire checks, pressure audits.
Service providers come to your yard or to remote yards, and do tire checks, pressure audits.

Tire maintenance is like preparing a fine meal. Unless you really like cooking and are very good at it, it's far easier – and safer sometimes – to visit a nice restaurant. At least when it comes to taking care of your tires, you don't have to dress up for the occasion.

Don't laugh. Successful tire maintenance isn't much different from cooking on a near-expert scale. You need the right ingredients, the right tools, the right skills, and you have to like doing it. Fleets muddle through using existing staff – likely not experts in tire care – and they carve off a few hundred square feet in the corner of the shop and call it a tire bay. Throw in a few tools and you have enough to handle the odd emergency as well as the routine tire and wheel mounting chores.

And you can't ignore the art form of cooking or tire maintenance. Chefs are called chefs, not cooks, for a reason. So it is with tire service technicians, minus the tall hat. These people know tires. You'll pay a little more for their expertise, but it's not unlike the difference between The Outback and Morton's. 

Still want to tackle tires yourself? Go out for a nice dinner and give it some thought. Here are five good reasons why outsourcing your tire program will help you sleep better.

1) Reduce Overhead, Risk & Liability

Tire management can be risky business. There's heavy lifting involved and a sometimes volatile work environment. In short, people can and do get hurt in tire service. You can reduce your risk and exposure by outsourcing the work.

"Fleets can reduce the full-time-equivalent number of employees who do that work at your location by having a vendor come onsite and do it," says Terry Clouser, former director of maintenance at UPS, now retired after 27 years, and one of HDT's Truck Fleet Innovators for 2011. "Outsourcing can reduce your liability insurance too, along with the chances of an accident and your exposure to OSHA-related citations and violations."

As well, you can reduce the shop space needed for all the related equipment and space for inventory (good and bad tires). By reducing that space, you'll also reduce your utilities expenses. And there's no need to buy and maintain all the related equipment and tools and maintain employee certifications.

Clouser says it's the way to go for large and small companies. "It eliminates at lot of risk and exposure, as well as up-front non-productive costs, such as workers' comp, overhead, etc."

2) Full-Service Maintenance

Outsourcing tire maintenance is like having you own people do it, only better. Unless you have the resources to run your own retreading facility, wheel reconditioning shop, tire balancing and repair facilities, you aren't full service.

David Simpson is the corporate transportation and safety Manager at BWI  Companies of Texarkana, Texas, a private fleet serving the company's network of garden centers, farm & feed stores, hardware stores, and grocery stores. Simpson has been using a single tire service vendor since the 1970s.

"Heintschel Tire of Texarkana does most of our tire maintenance at its main distribution center," Simpson says. "We have our own mechanic who does fleet checks and other light tire work, but Heintschel Tire does all the heavy lifting, like repairing and keeping track of our tires."

Simpson says Heintschel (part of Goodyear's national tire service network) comes over once a week and picks up tires and wheels that need work and returns the lot they picked up the week before. All the tires are tracked and inventoried, and the work done recorded and entered into the tracking system. They even do steel wheel restoration right on site.

"Whenever we dismount a tire and wheel, the wheel is stripped down, sandblasted and repainted, and a new valve core installed," Simpson says. "It's cheap compared to a leaking tire because the bead won't seal properly. That sets you up for the possibility of a blowout, or maybe just a casing failure because it's been run underinflated. Plus you get the aesthetic advantage. Powder coating keeps the wheels looking like new. The appearance of the equipment is important to us."

"Wheel reconditioning can't be done in-house because of the painting or powder coating and bead-blasting," Clouser notes from experience. "Vendors can set up and get economies of volume and get good ROI on that equipment. Few fleets could win there, so finding a vendor who does that too is a bonus."

Simpson says he hardly gives tires a second thought. "We keep an inventory here and at many of our distribution centers, and our people and can change out a tire anytime," he says. "Heintschel tracks what we keep in inventory and always has a fresh supply of painted and mounted tires and wheels ready when we need them."  

Comment On This Story

Name:  
Email:  
Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.

GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by


WHEEL ENDS SOLUTIONS

Wheel end expert Jeff Geist from STEMCO will answer your questions
Ask a question

Sponsored by

Magazine