Maintenance

Shop Safety: Carrying on the Good Fight

May 2009, TruckingInfo.com - Feature

by Tom Berg, Senior Equipment Editor, Senior Editor - Also by this author

SHARING TOOLS        | Print Subscribe
Cleanliness may be next to godliness, but it also makes lots of sense in a truck shop. So say three maintenance managers we interviewed for this article. "Good housekeeping,"
as one described the recommended ongoing effort to keep the place neat and orderly, helps technicians concentrate on their work. And, for want of a better management buzz word, a squared-away establishment keeps them from falling over things - cutting accidents right there.

A shop has to be clean, well lit and organized. It's got to be managed like a supermarket, says Darry Stuart, president and CEO of DWS Fleet Management Services, Wrentham, Mass. When all these housekeeping things are in place - the cleanliness, the lighting so people can see what they're doing and avoid slips and falls, and organization, so things run smoothly and predictively - then technicians will get used to it and safety will click into place.

A shop needs a monthly check, just like the preventive maintenance on a truck. For instance: Grinders, lighted. Vises, smooth operating, not broken. Work benches - dirty all the time? That becomes part of the attitude. Tire cages? Well, those cages are the most abused piece of equipment in a shop, Stuart says, because they are used wrong, not used at all, or simply not there. Teach guys who bust tires and put them back together how to use a cage and insist that they use them every time (see tire safety feature, page 42) .

ADVERTISEMENT


On company that emphasizes shop safety is Southeastern Freight Lines in Columbia, S.C. For safety and other matters, Southeastern uses an IQ (individualized quality) approach in the shop and elsewhere in the company. Part of this campaign is monthly safety meetings for every shift.

Supervisors start meetings with a quality focus, a period of praise for deserving individuals, and then goes to selected topics: Use of lights - hey, there's a light out over here, someone says, or a switch is shorted out in the locker room. Those things get fixed and the place is a little safer. Maintenance service topics, or MSTs, get covered; they include any change in procedures for certain tasks, or maybe a modification campaign involving certain vehicles or components.

In the employee recognition process, a person can recommend a pat on the back for somebody who helped him, and everyone feels better about everyone else, and so they work better together. Employees regularly rate their supervisors for their management skills, and that includes the ability to deal effectively with people. Also, does the technician have the tools he needs to do his job?

And there are regular "safety cookouts" where a technician who's gone a month without an accident gets a good hot dog, another guy who's gone accident-free for a quarter gets a hamburger, and a fella who's gone six months without hurting himself or somebody else might get a juicy steak. They hold these during regular meal or rest breaks, and Lee Long, director of maintenance, credits Southeastern's owners for being generous and enlightened enough to sponsor these events.

An in-house safety officer does monthly audits of the fleet's shops, looking for general cleanliness, any hazardous materials laying around, where tools and equipment are stored, whether machinery like grinders is "safetied" after use. He and regular supervisors look for the basics: use of gloves, steel-toed boots, glasses, hearing protection, face shields and rubber aprons for anyone doing steam cleaning, and wearing a tethering harness while working atop a trailer.

Finally, there's "lock out, tag out" - the procedure for securing a truck while it's being worked on. Take the key out of the ignition and put a tag on the steering wheel, with the name of the person who pulled the key. If the technician will be working on the engine, disconnect the batteries so the engine can't be started if somebody digs up another set of keys.

At Ozark Motor Lines in Memphis, Tenn., they've got a slightly different lock-out, tag-out procedure, according to Glen McDonald, director of maintenance. Each technician has a blank key that he puts that in the ignition; the key has a tag with his name on it so folks can go looking for him if they're wondering about the truck.

Ozark managers do quarterly meetings. They used to do them monthly, with a safety committee and safety director, reps and supervisors in different shops, but it got to where they were rehashing the same stuff, so they dropped it back to quarterly, McDonald says. The safety director does make periodic walk-throughs, announced at first and then unannounced. Surprise is best - let them come through - because then the director sees what's really happening versus what they prepared for him to see. Those were every month, too, and that was too much, so now they're quarterly, and can occur any time in that period.

Some things Ozark managers have covered in meetings:
• Plastic covers for fluorescent tubes in case they explode;
• Frayed insulation on wires;
• Pit area - keep it clean by placing cardboard under the grate to catch falling crud;
• Stuff piled on steps leading to the mezzanine - clean off those stairs;
• Clutter in battery station, storage rooms, access to fire extinguisher blocked; and
• Chains across shop entrances to discourage non-authorized personnel from wandering in.

Not mentioned by any of the managers were a mop and pail, vacuum cleaner, cloths, detergents and anything else needed to keep the shop and adjoining rest rooms, showers and locker rooms really clean. We can presume those are on the premises and they're put to regular use.

From the April 2009 issue of Heavy Duty Trucking.

Comment On This Story

Name:  
Email:  
Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by


WHEEL ENDS SOLUTIONS

Wheel end expert Jeff Geist from STEMCO will answer your questions
Ask a question

Sponsored by

Magazine