Maintenance

FMCSA

1  -  4  of  4

March 2014, TruckingInfo.com - Editorial

Commentary: How Much do Your Technicians Know About Wheel Integrity?

By Rolf Lockwood, Executive Contributing Editor

Executive Contributing Editor Rolf Lockwood discusses wheel integrity and the importance of technicians being well-versed in the rules of fastening wheels properly.

Tags: FMCSA, CSA, Wheels, Wheel-offs, Technicians

December 2013, TruckingInfo.com - Department

Two Things You Should Know About Trailer Lighting and Wiring

This LED lamp’s lens spreads light across 180 degrees of view, and its four diodes ensure sufficient candlepower throughout that wide angle to meet or exceed the federal regulations. The lamp is therefore “PC rated,” with the C meaning Combination clearance and sidemarker, and it can be mounted on the trailer’s side, though within 6 inches of its nose. (P, for Parking, is from an old industry classification that has been retained.)

By Tom Berg

Over the years, electrical failures have been the number one problem with trailers. Lighting problems have been reduced by the wider adoption of LED lighting. However, even LEDs, along with the rest of the electrical system, are subject to corrosion, which remains a major headache.

Tags: FMCSA, Trailers, LED Lighting, NHTSA

February 2013, TruckingInfo.com - WebXclusive

How to Set up a Maintenance Program that Will Keep FMCSA Happy

By Thomas Bray, Editor, J.J. Keller & Associates

Whether you have one truck or 20,000, the FMCSA's maintenance regulations apply to you. The safety and compliance experts at J.J. Keller have tips for owner-operators and small fleets on how to develop a maintenance program that will meet federal standards.

Tags: Maintenance, FMCSA, Owner-Operators

January 2013, TruckingInfo.com - Feature

Motor Carriers Make Adjustments While CSA is Fine-Tuned

By Bob Rose, Contributor

In December, the FMCSA made good on its commitment to Congress to install refinements to the CSA initiative by implementing 11 changes to the Safety Measurement System. J.J. Keller's Bob Rose has more details.

Tags: FMCSA, Safety, J.J. Keller, Compliance, CSA, Hazmat

« Previous1Next »

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.



GotQuestions?

LUBRICANTS

The expert, Mark Betner from Citgo will answer your questions
Ask a question

Sponsored by

Magazine