Fuel Smarts

GHG Phase 2: Weighing the Devil in the Details

September 2016, TruckingInfo.com - Feature

by Jack Roberts

SHARING TOOLS        | Print Subscribe

Phase 2 of the federal government’s greenhouse gas and fuel economy regulations for medium- and heavy-duty trucks arrived last month.

Released jointly by The White House, the Environmental Protection Agency and the National Highway Traffic Safety Administration, they present the North American trucking industry with an environmental and technological to-do list that will keep OEMs, technology suppliers, and fleets busy for the next decade.

The GHG Phase 1 rules were finalized in 2007, hard on the heels of the implementation of EPA diesel exhaust emissions regulations that drastically reduced the amount of nitrous oxides (NOx) and particulate matter emitted by diesel engines. The threat of global climate change (see box on page 50) prompted a shift in focus at the federal level to reducing greenhouse gas emissions in trucks by improving fuel economy.

California, however, still wants to cut more NOx emissions from diesel exhaust, something truck and engine makers say will be difficult to do while improving fuel economy. The EPA announced it will work with the California Air Resources Board to evaluate future emissions standards with an eye toward further reducing NOx.

Building on Phase 1, EPA says the GHG Phase 2 final rules are designed to promote a new generation of cleaner, more fuel-efficient trucks by “encouraging the wider application of currently available technologies and the development of new and advanced cost-effective technologies through model year 2027.”

The final vehicle and engine performance standards were developed with input from the automotive and trucking industries, environmental groups, labor unions and other concerned parties. They will cover semi-trucks, large pickups and vans, and all types of buses and work trucks for model years 2021-2027.

According to government officials, the new standards will result in significant GHG emissions reductions and fuel efficiency improvements across all of these vehicle types. For example, when the standards are fully phased in, tractors in a tractor-trailer combination are expected to achieve up to 25% lower carbon dioxide emissions and fuel consumption than an equivalent tractor in 2018.

Overall, the agency says, GHG Phases 1 and 2 will lower CO2 emissions by approximately 1.1 billion metric tons, save vehicle owners fuel costs of about $170 billion, and reduce oil consumption by up to 2 billion barrels over the lifetime of the vehicles sold under the program. The agencies contend the program will provide $230 billion in net benefits to society, including benefits to our climate and the public health of Americans, and that these benefits outweigh costs by about an 8-to-1 ratio.

But the trucking industry must still deal with those costs, as well as ones the agencies might not have taken into account.

Phase 2 highlights

The CO2 and fuel consumption standards for Class 7 and 8 combination tractors and engines start in model year 2021, increase incrementally in model year 2024, and phase in completely by model year 2027. The standards differ by vehicle weight class, roof height, and cab type (sleeper or day). The fully phased-in standards will achieve up to 25% lower CO2 emissions and fuel consumption compared to the Phase 1 standards.

There are also separate engine standards. For diesel engines, new standards begin in model year 2021 and phase in to model year 2027, with interim standards in model year 2024. The final diesel engine standards will reduce CO2 emissions and fuel consumption by up to 5% for tractor engines and up to 4% for vocational engines compared to Phase 1.

The rule also requires a 16 to 19% efficiency improvement for vocational vehicles and 16% for heavy-duty pickup trucks and vans.

The final rule has more ambitious efficiency goals than the proposed rule unveiled last year, but a phased-in approach should help prevent sticker shock and forced adoption of not-quite-ready-for-prime-time technologies.

Key changes in Phase 2 GHG rules compared to the proposal include:

  • 10% more GHG and fuel consumption reductions;
  • More robust compliance provisions, including improved test procedures, enhanced enforcement audits, and protection against defeat devices;
  • More stringent diesel engine standards;
  • An improved vocational vehicle program with a regulatory structure better tailored to match the right technology for the job;
  • Maintaining the structure and incremental phase-in of the proposed standards, allowing manufacturers to choose their own technology mix and giving them the lead time needed to ensure those technologies are reliable and durable.
  • Increased flexibility to minimize impacts on small businesses.

Reactions to the final rule vary. OEMs and technology suppliers are, predictably, generally upbeat and confident they can meet Phase 2 targets in the allotted timeframe, while fleet executives are wearily resigned to the whole business. And some in the industry believe there are better ways to go about reducing GHG emissions from trucks.

Phase 2 includes standards for trailers used with heavy-duty combination tractors. When fully phased in by 2027, trailer standards are expected to achieve up to 9% lower CO2 emissions and fuel consumption compared to an average model year 2017 trailer.  
Phase 2 includes standards for trailers used with heavy-duty combination tractors. When fully phased in by 2027, trailer standards are expected to achieve up to 9% lower CO2 emissions and fuel consumption compared to an average model year 2017 trailer.

Proven and untested technologies

There are some 1,700 pages in the official government rules detailing GHG Phase 2. So, it will be some time before the trucking industry has a complete picture of everything they entail.

Glen Kedzie, American Trucking Associations vice president for energy and its environmental counsel, said the broad scope of GHG 2 was pretty much set in stone. It’s the details buried in the ruling that will determine how difficult – and costly – these regulations will may ultimately prove to be. 

The association is pleased that the rules stuck to the original, proposed extended compliance period, which will give all involved parties more time to meet the new standards. During the comment and public hearing period, some environmental interests pushed for a faster adoption timeline.

But Kedzie cautioned that when broken down, GHG 2 means four new target standards for trailers, three for engines, and three for vehicles. “That’s a lot of new stuff,” he said. “And the bottom line is we can expect vehicle efficiency to go up. But so will associated costs for fleets.”

One big change in Phase 2 is that it includes trailers. The trailer standards will have staggered effective dates, with EPA regulations taking effect in the 2018 model year and NHTSA standards in 2021. OEMs can get credits for early and voluntary participation. And since many trailer manufacturers are small businesses, the program includes provisions to make it easier for them to comply.

 “The overall trend for the past few years has been toward increased aerodynamic fairings on the sides, as well as ‘boat tail’ type devices at the rear of trailers,” Kedzie said. “That trend will be accelerated, as will more aggressive development of the next generation of low-rolling resistance tires and their increased use on tractor-trailers.”

Another positive, according to Mihai Dorobantu, director of technology planning and government affairs for the Eaton Vehicle Group, is that the new rules give OEMs and component/technology providers multiple pathways to compliance.

Nic Lutsey, program director with the International Council for Clean Transportation, noted that the regulations will drive fuel-saving technologies into the market that ICCT research has shown can increase typical highway fuel economy from 6 to 7 mpg today up to above 8 mpg and deliver payback periods within two years.

“There are a lot of available and ready-to-be-deployed technologies, and this regulation ensures that the most cost-effective of those technologies see more widespread use,” Lutsey said.

Dorobantu, for instance, cited advances in “smart” automated manual transmissions and integrated engine-transmission packages.

However, he said, pressure will be on OEMs to put together significant technology packages to comply with the standards while minimizing additional costs, weight and complexity. And while building on existing technology can help, there are new technologies that have to be implemented as well – with waste heat recovery systems and hybrid drivetrains standing out.

Looking at the numbers, Kedzie predicted that a new, GHG-compliant tractor in 2027 will cost $15,119 more than a truck does today (in 2013 dollars).

“Fleets may want to mitigate that cost increase by going to OEMs and asking them to build a truck without waste heat recovery or hybrid drivetrains,” he noted. “And although the OEMs can technically do that under the regulations thanks to average emissions performance based on model year builds and banked credits for early compliance, it’s not really in their best interest to do so. Because for every ‘inefficient’ truck they build and sell, the next one has to be super-efficient to maintain their mandated compliance averages.”

Ken Calhoun, vice president of customer relations at Truck Centers of Arkansas and a member of ATA’s Technology & Maintenance Council’s board of directors, thinks the new standards will prove to be difficult to achieve and frets that costs will balloon for all aspects of fleet management. He said many of the technologies highlighted by GHG Phase 2 were pioneered on the recent joint government-industry SuperTruck project. But many of those systems, like waste heat recovery and hybrid drivetrains, were deemed far too expensive to put into production based on their nominal fuel economy returns.

“Most of us in trucking have made a career out of adaptation to new technologies,” he said. “The good old days of who can build a better mousetrap to gain market share and succeed have long since been replaced by who can meet the standards and build in some degree of reliability. There have been some pretty disastrous experiments along the way.”

Calhoun said that once again, fleets will be the ultimate adjudicator of the new technologies required by GHG regulations.

“The testing will happen in real world application, and we will learn the hard way what works and what doesn’t in the repair facilities rather than the labs,” he said. “I’m just hoping that all of these projected cost savings aren’t immediately gobbled up in maintenance costs, lost utilization, and reduced resale value. At the end of the day, protecting our environment and reducing our dependence on foreign oil are good things, important things, but they will be, as they have been, very challenging for us all.”

A different tree to climb?

Kevin Tomlinson, director of maintenance at Ohio-based South Shore Transportation and TMC immediate past chairman, thinks that ultimately, there are better, more common-sense ways to meet GHG emissions targets.

“I think the levels outlined in Phase 2 are a little high,” he said. “Although I’m assuming they’re do-able given that we received 10 years to give it a try. On the other hand, this industry has spent a lot of money over the past 10 years in terms of repair and downtime costs. And we have no idea that the next 10 years will bring. It’s been challenging to say the least.”

Tomlinson said he finds himself wondering if there isn’t a better way. “Smaller engines burn less fuel and emit fewer emissions,” he noted. “So why not concentrate on proven technologies like increased turbocharger efficiencies and build smaller, more powerful engines?”

It’s a sentiment ATA’s Kedzie shares. “We’ve reached the point where EPA has gathered all low-hanging fruit off the tree,” he said. “And now we’re going up to get the higher-hanging fruit, which is much harder to get to. And I wonder if maybe we’d be better off finding another tree with low-hanging fruit on it.”

What Kedzie is talking about is upgrading the nation’s roadways and transportation network with dedicated freight corridors and truck-platooning lanes. He’s also referring to deploying modern vehicle-to-vehicle and vehicle-to-infrastructure communication systems and even autonomous trucks that can curtail traffic congestion and boost freight efficiency.

“If we get a GHG Phase 3 proposal, we’re really going to be pushing the envelope,” he said. “We’re already in uncharted waters. And things are quickly getting so complex that only the largest fleets have the resources and staff to deal with all the changes. So I’m afraid that these new rules will prove to be even more bad news for owner-operators and small fleets in this country.”

Comments

  1. 1. Ray Puckett [ September 13, 2016 @ 06:14AM ]

    Why do we continue to support and obey the federal governments grip of control on every facet and detail of our lives? It is past time for some civil disobedience in many peoples minds. When will the U.S. Citizens act on their thoughts remains to be seen. Sadly we are fooled into believing we are a free people.

  2. 2. anonymous [ September 13, 2016 @ 07:13AM ]

    It's amazing that we as a country are still protecting the petroleum industry. While they have record annual profits, their customers (us) have to spend more to get the same truck and endure higher repair costs and downtime.
    This is simple, the old cliche "garbage in, garbage out", so force the petroleum industry to clean up the fuel, you will have less pollutants coming out of the exhaust system. Look at the railroad industry, one of if not the biggest user of diesel fuel, are they following the same regulations as we are?

  3. 3. Willie [ September 13, 2016 @ 08:13AM ]

    Ray, why do you have a problem with breathing cleaner air. The filthy air we breath now is due to all the poor engine and fuel designs of the past. The air we breath is killing us!!!!

  4. 4. Lou Conti [ October 11, 2016 @ 07:40AM ]

    There are solutions under development out there to address these concerns on multiple fronts. The industry as a whole needs to look at the impact of converting to all of these more expensive and complex emissions systems. Does anyone give thought to the 2 million or so older trucks out there that run great and are more reliable than newer ones?
    What "cost" is associated with scrapping out these old girls and what environmental impact does building 2 million new trucks make?
    To be truly impactful, fringe technologies that can be retrofitted to these older vehicles should be investigated.
    Imagine what could be done if we could reduce emissions on older trucks while improving efficiencies. Capital equipment costs go down, emissions could be reduced and mileage could be improved without having to drop $150K on a new rig.
    As an industry, we need to take a hard look at the trees we are barking up.

  5. 5. Roy Suomi [ November 03, 2016 @ 04:14AM ]

    How about the "Kids" diesel trucks that belch out pounds of soot at every stoplight ?? I've got a 6.2 liter Chevy that doesn't emit as much as a breath of black soot when taking off from a light.. I'll bet all older trucks will be outlawed soon for this very reason. Roy Suomi

 

Comment On This Story

Name:  
Email:  
Comment: (Maximum 2000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

Newsletter

We offer e-newsletters that deliver targeted news and information for the entire fleet industry.

GotQuestions?
sponsored by
sponsor logo

ELDs and Telematics

Scott Sutarik from Geotab will answer your questions and challenges

View All
GotQuestions?

Sleeper Cab Power

Steve Carlson from Xantrex will answer your questions and challenges

View All