Economic Watch: Manufacturing Remains Weak, Construction Booming
Economic activity in the nation’s manufacturing sector showed only slightly better signs of life in February and remains tepid, but construction spending in January hit it highest level since 2007, according to newly released reports.


Economic activity in the nation’s manufacturing sector showed only slightly better signs of life in February and remains tepid, but construction spending in January hit it highest level since 2007, according to newly released reports.
The monthly survey of the nation’s supply executives by the Institute for Supply Management moved its manufacturing Purchasing Managers Index higher to 49.5% for February, up 1.3 percentage points from the January reading of 48.2%.
“Comments from the panel indicate a more positive view of demand than in January, as 12 of our 18 industries report an increase in new orders, while four industries report a decrease in new orders,” said by Bradley J. Holcomb, chair of the ISM Manufacturing Business Survey Committee.
Despite the improvement, economic activity in the manufacturing sector contracted in February for the fifth consecutive month, according to ISM, which says a reading below 50 indicates negative growth.
The New Orders Index registered 51.5%, the same reading as in January, while the Production Index registered 52.8%, 2.6 percentage points higher than the January reading of 50.2%. The Employment Index registered 48.5%, 2.6 percentage points above the January reading.
Overall, of the 18 manufacturing industries in the survey, nine reported growth in February.
“While still negative, production activity appears to be markedly less negative at the moment, hardly a robust assessment but better than a sharp stick in the eye,” said Lindsey Piegza, chief economist at Stifel Fixed Income. “Still facing the perfect storm from a heightened U.S. dollar, ample inventory overhang and tepid global demand, producers are still cutting back production, albeit at a slower pace than when the Federal Reserve opted to raise rates for the first time in December.”
A similar report from financial information services provider Markit shows slightly better conditions with manufacturing in February growing, while the rate of expansion fell from the month before. As a result, , its U.S. Manufacturing Purchasing Managers’ Index declined to 51.3, down from 52.4 in January.
The headline index was up fractionally from the earlier, preliminary estimate in February of 51, but this was still the second-lowest reading since October 2012. Also, the latest reading pointed to one of the weakest improvements in overall business conditions since the U.S. economic recovery began in late 2009.
Like the ISM index, a reading above 50 indicates expansion while one below it shows contraction.
February data indicated that manufacturing output growth slowed for the third time in the past four months. The latest increase in production was only modest and the weakest recorded since October 2013. Reports from survey respondents suggested that softer new business growth and uncertainty about the economic outlook had acted as a brake on production at their plants.
Volumes of new work increased moderately in February, with the pace of expansion easing to one of the slowest recorded over the past three-and-a-half years, according to the report. Anecdotal evidence suggested that clients had delayed spending decisions in February amid caution about the business outlook. Additionally, there were further reports citing weak demand from energy sector clients.
Subdued export demand also weighed on new business levels in February. The latest survey pointed to the most marked decline in new orders from abroad since April 2015, which manufacturers partly linked to competitive pressures from the strong dollar.
“The February data add to signs of distress in the U.S. manufacturing economy. Production and order book growth continues to worsen, led by falling exports. Jobs are being added at a slower pace and output prices are dropping at a rate not seen since mid-2012,” said Chris Williamson, chief economist at Markit. “The deterioration in the manufacturing sector’s performance since mid-2014 has broadly tracked the dollar’s rise, which makes U.S. goods more expensive in overseas markets and leads U.S. consumers to favor cheaper imported goods.”
He said that with other economic headwinds, including the downturn in the oil sector, heightened uncertainty due to financial market volatility, global growth worries and growing concerns about the presidential election, it’s no surprise that the manufacturing sector is facing its toughest period since the global financial crisis.
Construction Remains Healthy
Meantime, a separate report on U.S. construction spending from the Commerce Department shows activity in the nation’s construction sector remains one of the brightest spots for the overall economy.
January’s level of construction spending increased 1.5% from December, far better than many analyst expectations of just a 0.3% increase. The level is also 10.4% higher when compared to January 2015.
The $11.4 trillion level is the best since October 2007 while December’s rate was revised upward from last month’s 0.1% hike to a 0.6% gain.
The overall improvement was due to both increases in public and private building, including a 0.5% rise in residential construction projects, which hit its highest level since November 2007, while public construction outlays jumped 4.5% in January, reaching its highest level since September 2010.
More Fleet Management

How Innovative Trucking Leaders Turn Change Into an Advantage
As the pace of change accelerates in trucking, the fleets that adapt best have more than the latest technology. They have cultures that embrace improvement.
Read More →
Freight Broker Bonds Just Got Harder to Get. Here's What That Means for Your Fleet.
When it gets harder for a freight broker to prove they are financially sound, the ones who cannot clear that bar get pushed out of the market. And those are exactly the brokers who used to leave motor carriers holding the bag.
Read More →
Long-Awaited Canadian Border Bridge to Open in Detroit
For trucking, the bridge opening should offer immediate improvements in efficiency and reliability, with new customs facilities, expanded inspection capacity, and direct freeway-to-freeway connections.
Read More →
Aurora Rolls Out Next Generation of Driverless Trucks for Commercial Freight
Aurora's latest autonomous trucks it's rolling out with International feature lower-cost hardware designed for a million miles as the company expands commercial driverless freight operations across the U.S. Sun Belt.
Read More →
Freight Tonnage Down, Rates up, as Lower Capacity Powers Trucking Recovery
The recovery from the freight recession continues to be driven by reduction in capacity rather than by increased demand.
Read More →
Think Your Trucking Fleet Isn't Using Much AI? Think Again
Shadow AI — the use of unauthorized artificial intelligence tools at work — is becoming increasingly common, putting sensitive company data at risk. Learn how trucking fleets can protect sensitive data while embracing AI.
Read More →
ArcBest Consolidates Brands, Cuts Workforce
The company will bring three business units under the ArcBest brand, eliminate about 2% of positions, and expects the changes to generate $40 million in annual savings.
Read More →
Trucking Fleets Faced Record Operating Costs During Third Year of Freight Recession
ATRI's annual operational cost report shows carriers trimmed fleets, delayed equipment purchases, and ran older trucks as expenses continued to outpace freight rates.
Read More →
Michelin Adds AI Assistant to MyConnectedFleet Platform
Michelin’s new generative AI tool delivers instant fleet insights, helping managers analyze fuel use, tire maintenance, vehicle status, and operational performance without manually creating reports.
Read More →
LytxOne Platform Now Features AI, Compliance, and Asset Tracking Tools
New enhancements add AI-powered insights, asset tracking, compliance automation, and configurable privacy controls to Lytx's all-in-one fleet management platform.
Read More →
